Using A Neckloop. Williams Sound PKT D1, D1, Pocketalker Ultra PKT D1

16

U

SING

A N

ECKLOOP

Williams Sound’s optional neckloop telecoil couplers magnetically couple the audio output from the POCKETALKER ® ULTRA into a hearing aid equipped with a telephone coil.

NOTE: The Neckloop (NKL 001) works only with hearing aids equipped with a telephone coil

(T–Switch).

H

OW

T

O

U

SE

T

HE

N

ECKLOOP

1. Place the neckloop over your head and around your neck.

2. Slide the bead upwards to a comfortable position. This helps keep the neckloop in optimal position for coupling with your hearing aid.

3. Plug the neckloop into the earphone jack on the

POCKETALKER ® ULTRA.

U

SING THE

N

ECKLOOP

Slide cord lock upward to a comfortable position

Cord

Lock

4. Turn the POCKETALKER ® ULTRA on and set the volume control to

“5”, or about half of full volume.

5. Turn the switch on your hearing aid to the “T” position and adjust the volume for comfortable listening.

6. If the sound is weak, increase the volume on the

POCKETALKER ® ULTRA, then on your hearing aid.

17