advertisement
Glass Shade
C oLorado
LIGHT KIT HARDWARE
Light Kit Screw (3)
Glass Fitter
Light Kit
Fitter Screw (3)
LIGHT KIT INSTALLATION
Step 1. To attach the Glass Fitter partially install two Fitter Screws into the switch housing mounting plate.
CFL
Bulb
Fitter Screws
Step 2. Align the keyhole slots in the Glass Fitter with the Fitter Screws.
Step 3. Turn the Glass Fitter clockwise until the
Fitter Screws are firmly situated in the narrow end of the keyhole slots.
Step 4. Install the remaining screw into the Light Kit
Mounting Plate.
Step 5. Tighten all three screws firmly.
WARNING: Do not let wires become lodged between Fan
Adapter and Light Kit.
Step 6. To install the Light Kit, partially install two
Light Kit Screws into the Glass Fitter
Fitter Screws
Light Kit
Screws
15
Step 7. Connect the upper plug from the motor to the lower plug connector in the Light Kit.
WARNING: Do not let wires become lodged between Fan Adapter and Light Kit.
Plug
Connector
Step 8. Align the keyhole slots in the Light Kit with the Light Kit Screws and raise the Light Kit.
Step 9. Turn the Light Kit clockwise until the Light
Kit Screws are firmly situated in the narrow end of the keyhole slots.
Step 10. Install the remaining screw into the Light
Kit Mounting Plate.
Step 11. Tighten all three screws firmly.
Step 12. Screw the included 26 Watt CFL bulb into the socket.
Step 13. Loosen the three thumbscrews on the
Glass Fitter.
Step 14. Raise the Glass Globe into the Glass Fitter.
Step 15. Tighten the three thumbscrews.
Thumbscrew
Glass Globe
16
Light Kit
Light Kit
Screws
26 Watt CFL
Bulb
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Parts List
- 5 Introduction
- 5 Before You Start
- 5 Safe Use
- 6 Mounting Recommendations
- 6 Sloped Ceiling Installation
- 7 Fan Installation
- 7 Getting Started
- 7 Mounting Bracket Installation
- 8 9' Ceiling Installation
- 10 Hanging the Fan
- 11 Wiring
- 12 Securing the Canopy
- 13 Blade Installation
- 15 Light Kit Installation
- 17 W-74 Control Installation
- 17 W-74 Wall Control Preparation
- 17 Installing the W-74 Wall Control
- 17 Single W-74 Installation
- 18 Dual W-74 Installation
- 19 W-74 Operation
- 19 Operation Power
- 19 Operation Speed Control
- 19 Operation Reversing Airflow
- 20 Operation CFL Mode
- 20 Changing Frequency Setting
- 20 Operation Lights
- 21 Automatic Demonstration Program
- 21 Operation Safe-Exit
- 22 Operation Home-Safe® Program
- 22 Operation Fan-Minder™ Program
- 22 Light-minder® Program
- 23 Troubleshooting Tips
- 24 Care Recommendations
- 24 Product Specifications