Re-record greeting using remote access. AUDIOLINE AB830

- Remote access -

Note: While you are listening to the messages, the unit asks every 2 minutes and 40 seconds, whether you still want to carry on listening. The answering machine stops and you will hear three signal tones. Enter any number to continue playing back the messages.

While playing back, you have the following facilities:

Skip

Repeat current message Press 8 and #

Delete message

After the last message, the machine answers with several signal tones. Now, within the next 7 seconds, you have various possibilities. If you do not make any input within these 7 seconds, the connection will be cut off automatically and all messages will remain saved.

Switch off answering machine Press 9 and #

After this input, the answering machine is no longer ready for operation.

5.4 Re-record greeting using remote access

Call your own telephone number and allow the greeting message to run through to the end. Wait until your answering machine is ready to record a message.

After the signal tone, enter your personal authorisation code by pressing the appropriate numbers on the number pad of a telephone. Two signal tones confirm that the right code has been entered.

To re-record the greeting message, press the key combination 7 and #.

Dictate your new greeting after the signal tone.

Complete the recording with the keys 7 and #. The new greeting will now be repeated automatically.

Finish the call by putting the receiver down.

27