advertisement
AGFEO T 18
Making a call
During the call, the display shows you the duration of the call.
Direct dial
In direct dial, the numbers are dialled immediately after you press the button and no correction is possible.
1. Lift the receiver and wait for the dial tone.
2. Enter the desired phone number using the keypad. The numbers pressed will be displayed and immediately dialled.
3. If instead of dialling numbers you press the redial button ( ), the phone number last dialled will be dialled again.
4. End the call by replacing the receiver.
Dial with receiver on hook (advance dialling)
In advance dialling, the numbers you press are only dialled when you lift the receiver.
1. Enter the desired phone number using the keypad.
2. Use the “Del” button ( ) to delete individual numbers.
3. Start the dialling process by lifting the receiver.
4. End the call by replacing the receiver.
Hands-free
Your AGFEO T 18 is equipped with a hands-free function.
– To make a call hands-free in advance, press the loudspeaker button ( ) instead of lifting the receiver.
– If you wish to switch to the receiver during a hands-free call, simply lift the receiver and you can now continue the conversation using the receiver; the loudspeaker is switched off.
– If you wish to switch to hands-free during a call with the receiver, press and hold the loudspeaker button ( ) as you replace the receiver.
– To end a hands-free call, press the loudspeaker button ( ).
WARNING:
If you have a headset connected to your T 18, the hands-free function is deactivated and pressing the loudspeaker button ( ) will instead activate the headset.
29
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Sicherheitshinweise
- 3 Inhaltsverzeichnis
- 4 Verpackungsinhalt
- 4 Die Bedienelemente des T
- 5 Die Tasten des T
- 6 Das T 18 als Tischgerät
- 6 Das T 18 als Wandgerät
- 7 Installation
- 8 Grundeinstellungen nach dem ersten Anschliessen
- 8 Einstellmöglichkeiten
- 9 Einstellen der Sprache
- 9 Einstellen des Displaykontrastes
- 9 Einstellen von Datum und Uhrzeit
- 10 Einstellen der Amtsholung
- 10 Einstellen des Ruftons
- 10 Einstellen der Ruflautstärke
- 10 Einstellen der Flashzeit
- 10 Zeitdauer T1, T2 und T3 einstellen
- 11 Telefonieren
- 11 Direkte Wahl
- 11 Wahl mit aufgelegtem Hörer (Wahlvorbereitung)
- 11 Freisprechen
- 12 Gespräche übergeben
- 12 Anrufliste
- 12 Anrufliste öffnen
- 13 Wahlwiederholungsliste
- 13 Wahlwiederholungsliste öffnen
- 14 Namen über die Tastatur eingeben
- 14 Überblick der möglichen Zeichen
- 15 Telefonbuch
- 15 Rufnummern speichern
- 15 Rufnummer aus dem Telefonbuch wählen
- 15 Telefonbucheintrag bearbeiten oder löschen
- 16 Zielwahltasten
- 16 Rufnummer speichern
- 16 Rufnummer löschen
- 16 Rufnummer wählen
- 17 Auslieferungszustand
- 17 Technische Daten
- 17 Konformitätserklärung
- 18 Urheberrecht
- 18 Technische Änderungen
- 18 Technische Hotline
- 20 English Version
- 20 Safety information
- 21 Table of Contents
- 22 Accessories and Content
- 22 Operating components of the T
- 23 Buttons of the T
- 24 The T 18 as a tabletop unit
- 24 The T 18 as a wall unit
- 25 Installation
- 26 Basic settings on first connection
- 26 Settings options
- 27 Setting the Language
- 27 Setting the Display Contrast
- 27 Setting the Date and Time
- 28 Setting the PABX Prefix
- 28 Setting the Ringer Melody
- 28 Setting the Ringer Volume
- 28 Setting the Flash Time
- 28 Setting Time Durations T1, T2 and T
- 29 Making a call
- 29 Direct dial
- 29 Dial with receiver on hook (advance dialling)
- 29 Hands-free
- 30 Transferring calls
- 30 Call list
- 30 Open call list
- 31 Redial list
- 31 Open redial list
- 32 Input name via keypad
- 32 Overview of available characters
- 32 Phone book
- 33 Save phone numbers
- 33 Dial phone number from phone book
- 33 Edit or delete phone book entry
- 33 Speed dial buttons
- 34 Save phone number
- 34 Delete phone number
- 34 Dial phone number
- 34 Factory condition
- 35 Technical data
- 35 Declaration of conformity
- 35 Copyright & Technical changes