262 7.0 - REGULATION AND MAINTENANCE
7.1 - Importance of Maintenance
Maintenance is a basic and indispensable factor, being responsible for providing the longest lifetime for your equipment.
Lubrication is, without any doubt, one of the largest portions of maintenance and should be provided carefully, because, when performed inadequately, it can be highly damaging.
Appropriate lubrication is the one executed at that time right, in the correct amount and with lubricants recommended by the manufacturer.
Take into account the overall state of the machine, in particular where component cleanliness is essential for a long life and perfect operation of the equipment.
Attention!
Wear the appropriate PPEs in every maintenance activity. owner’s manual
7.2 - Adjustment of the Steering
Wheel Column
Locate on the column, to the left of the operator, the adjustment lever. Free it so the column moves - adjust to meet operator needs.
40069974
7.3 - Seat Adjustment
To adjust seat position, use the levers corresponding to the functions listed below.
7.0 - REGULATION AND MAINTENANCE
7.3.3 - Seat Angle Adjustment
Locate on the operator’s left hand side the two levers used in adjusting seat height.
The first lever corresponds to raising or lowering the seat front and the second one, does the same for the seat back.
263
7.3.1 - Suspension adjustment
If necessary, increase spring force as a function of operator weight;
- Spin the tap clockwise (+) until achieving the desired pressure.
If spring resistance needs reducing due to operator weight;
- Spin the tap counter-clockwise (-) until achieving the desired pressure.
7.3.4 - Seat Position (to move the whole seat forward and back)
Use the lever located in the front part of the seat to move the seat forward and back to meet operator needs.
7.3.2 - Seat back Adjustment
Seat on the seat and raise the lever to free the back. Adjust the angle.
Attention:
For safety reasons, never adjust seat position with the vehicle in movement.
mechanical sprayer PARRUDA
