Chapter 1-Getting Started
1.5 Working in Unit Configuration Mode
The Unit Configuration mode enables you to view the current configuration of a selected device and to modify the values of all relevant device parameters. For a description of each configurable parameter, refer to Chapter 3, Working with Unit
Configurations.
The Device List on the left side of the main Configuration Utility window can be loaded with updated device information using any one of the following mechanisms:
Local Network Autodiscovery: For a description of how to work with this
feature, refer to section
1.3.1
.
Locate Device: For a description of how to work with this feature, refer to section
1.3.2
.
Load Devices: For a description of how to work with this feature, refer to section
1.4.1
.
Each time you implement the Local Network Autodiscovery feature, the Device
List is reset. Therefore, it is recommended that you start by selecting the Local
Network Autodiscovery feature. Then, you can add more devices using the Locate
Device and Load Devices features. Alternatively, you can choose not to use the
Local Network Autodiscovery feature and create the Device List using the Locate
Device and/or Load Devices features.
To select a unit to review or update its configuration, double-click the relevant row in the Device List. When selected, the entry is highlighted in dark blue.
Information is then gathered from the device and displayed in the selected tab area. Once all information is loaded, the device is highlighted in blue.
NOTE
Wait until the Device List entry for the selected unit has turned blue before reviewing or modifying any parameters.
14
BreezeCONFIG for BreezeACCESS VL and BreezeACCES 4900 User Manual
