advertisement
▼
Scroll to page 2
of
64
Color Bubble Jet Printer Quick Start Guide Canon i450 Color Bubble Jet Printer Quick Start Guide. Copyright This manual is copyrighted by Canon U.S.A., Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon U.S.A., Inc. © 2003 Canon U.S.A., Inc. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon i450 Color Bubble Jet Printer. All statements, technical information and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representation or warranties concerning the products described. Specifications are subject to change without notice. As an ENERGY STAR partner, Canon U.S.A., Inc., has determined that this product meets the ENERGY STAR guidelines for energy efficiency. All information regarding non-Canon products was compiled from publicly available information. No representation is made regarding the accuracy thereof. Trademarks • • • • • Canon is a registered trademark of Canon Inc. PhotoRecord is a trademark of Canon Information System Research Australia. Macintosh, Mac and the Mac logo are registered trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Microsoft® and Windows® are registered trademarks of Microsoft Corporation in the U.S. and other countries. All other product and brand names are trademarks of their respective owners. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 Contents Contents Basic Printing Turning on the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loading Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Speciality Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing with Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing with Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3 5 7 9 Advanced Printing Printing Photographs Directly from a Digital Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Accessing Printer Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting Print Quality for Photographs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using Printer Driver Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Bundle Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing Borderless Photographs with Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing Borderless Photographs with Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 14 15 22 23 24 26 Printing Maintenance When Printing Becomes Faint or Colors are Incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Printing the Nozzle Check Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print Head Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print Head Deep Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aligning the Print Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing an Ink Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 29 31 33 35 38 Troubleshooting Cannot Install the Printer Driver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Print Quality is Poor or Contains Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Troubleshooting Printer Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Paper Does Not Feed Properly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Handling Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . An Error Message Appears on the Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cannot Print Properly from the Digital Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 44 45 46 47 48 50 Installing the Printer Driver when using Mac OS 9.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User’s Guide Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CANON LIMITED WARRANTY --- (USA Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 53 54 56 58 59 Appendix Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 1 Basic Printing Basic Printing Note This Quick Start Guide describes some of the features of your i450 printer and how to use them. For more information, view the i450 User's Guide on the Setup Software & User's Guide CD-ROM, CD-ROM or use the online help within your printer driver interface: While in the printer's Properties window, press the F1 key, or click ? in the upper right corner. Then click the feature you want to know more about, or click the Help button when displayed. Turn Balloon Help on by selecting Help, Help then Show Balloon Help. Help Turning on the Printer 1 Press the POWER button. The POWER lamp flashes while the printer warms up and changes to steady (nonflashing) green when the printer is ready. Important z Before unplugging the power cord, turn off the printer and ensure that the green lamp has gone out. z If the POWER lamp changes to orange and begins flashing, refer to the section "Handling Handling Error Messages" Messages on page 47. 2 Basic Printing Loading Paper Print Media to Avoid Do not use the following types of paper. Using such paper will not only produce unsatisfactory results, but can also cause the printer to jam or malfunction. • Folded, curled or wrinkled paper • Damp paper • Excessively thin paper (less than 64 gsm or 17 lb) • Excessively thick paper* (more than 105 gsm or 28 lb) *non-Canon branded paper • Picture postcards • Postcards affixed with photos or stickers • Envelopes with double flaps • Sealed envelopes • Envelopes with an embossed or treated surface • Any type of paper with holes (such as loose-leaf) Loading the Print Media This section describes how to load plain paper into your printer. • For detailed information on the speciality media Canon provides for use with its various printers, refer to the section "Using Using Speciality Media Media" on page 5. • Consult the User’s Guide for detailed instructions on how to load envelopes and speciality media into the printer. 1 Flatten the four corners of the paper before loading it. Important When paper is curled, gently bend them in the opposite direction until the paper becomes completely flat. 3 Basic Printing 2 Prepare to load paper. (1) Attach the paper rest. (2) Open the cover and pull out the paper output tray. (3) Open the front cover and adjust the paper thickness lever to the correct position for the media in use. Move to the left position for plain paper. Move to the right position for envelopes and T-shirt Transfers. (4) Close the front cover. 3 Load the paper. (1) Insert the paper into the sheet feeder with print side facing up. (2) Align the paper stack against the right side of the sheet feeder. Load Limit Mark Do not load beyond this Load Limit Mark. (3) Pinch the paper guide and slide it against the left side of the stack of paper. Note 4 z Do not touch the printed surface until the ink dries. For specific drying times, refer to the instructions packaged with your media. Basic Printing Using Speciality Media Canon recommends that you use genuine Canon media to ensure optimal print quality. Photo Quality Media • • • • • • • Photo Paper Pro Photo Paper Plus Glossy Matte Photo Paper Glossy Photo Paper Glossy Photo Cards High Gloss Photo Film High Resolution Paper Media Suited to Business Documents • High Resolution Paper • Transparencies 5 Basic Printing Canon Speciality Media Media Type Paper Rest Load Limit Photo Paper Pro Letter: up to 10 sheets* Left 4” x 6” : up to 20 sheets Photo Paper Pro Photo Paper Pro Perforated 4” x 6” : up to 20 sheets Left Photo Paper Pro** Photo Paper Plus Glossy Letter: up to 10 sheets* Left 5” x 7” : up to 10 sheets 4” x 6” : up to 20 sheets Photo Paper Plus Glossy Matte Photo Paper Up to 10 sheets Left Matte Photo Paper Glossy Photo Paper Up to 10 sheets Left Glossy Photo Paper High Resolution Paper Up to 80 sheets Left High Resolution Paper T-Shirt Transfers 1 sheet Right T-Shirt Transfer Transparencies Up to 30 sheets Left Transparency Note 6 Paper Thickness Lever Position Printer Driver Setting for Media Type z When using plain paper, up to 100 sheets can be set. Set the Paper Thickness Lever to the left and select Plain Paper from the printer driver Media Type. z For detailed description of print media types, refer to the User’s Guide. * : When paper cannot be fed normally, load the necessary number of sheets in the auto sheet feeder with them separating from each other to avoid them from sticking together. **: Print settings are much easier to select if you use the applications included on the Setup Software & User’s Guide CD-ROM when printing with Photo Paper Pro Perforated. For instructions on how to print from the software applications, refer to the Photo Application Guide. Basic Printing Printing with Windows Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this section are for printing in Windows XP. Create a document or open a file to print. Open Printer Properties dialog box. (1) Select Print from the application software's File menu. (2) Ensure that Canon i450 is selected. (3) Click Preferences or Properties. Note In Windows 2000, click the Main tab in the Print dialog box. 7 Basic Printing 3 Specify the required settings. (1) Click Media Type to select the type of media loaded in the printer. (2) Click OK. OK Note 4 z From the Page Setup tab select the correct document size to be printed. z To adjust Print Quality settings, select Custom and click Set on the Main tab. You can control quality in the Set Print Quality dialog box. z For details about other printer driver functions, refer to the User’s Guide or Help. z Select Preview before printing by clicking the check box. This displays a preview screen that allows you to confirm the selected printing effects and how your document will look when printed. Some applications do not contain the function to display the preview. Print the document. (1) Click Print. Print Note 8 You can cancel a print job in progress by simply pressing the RESUME/ CANCEL button on the printer. Basic Printing Printing with Macintosh Note 1 2 z The menu screens and dialog boxes that appear may vary, depending on the software application you are using. z The steps described in this section are for printing in Mac OS 9. Create a document or open a file to print. Select Paper Size. (1) Select the Page Setup from the application software's File menu. (2) Select the desired paper size from the Paper Size pull-down menu. (3) Click OK. OK 3 Specify the required settings. (1) Select Print from the application software's File menu. (2) Select the Media Type from the pull-down menu. (3) Select the type of document from the Print Mode pulldown menu. (4) Click Print. Print 9 Basic Printing Note z When you select the type of document from the Print Mode pulldown menu, the document will be printed in color and print quality suited to the characteristics of Media Type you have selected. Text: Select when printing documents consisting mainly of Text text. Graphic: Graphic Select when printing documents consisting mainly of graphs and graphics (illustrations) with strong color definition. Photo: Photo Select when printing documents consisting mainly of photographs and graphics featuring fine color gradation. Manual: Manual If you select Manual, Manual the Details button will become selectable. Click the Details button to display the Detailed Setting dialog box where you can fine-tune the Print Quality and Halftoning settings. Refer to the User’s Guide. z For details about other printer driver functions, refer to the User’s Guide or Help. z You can cancel a print job in progress by simply pressing the RESUME/CANCEL button on the printer. 10 Advanced Printing Advanced Printing Printing Photographs Directly from a Digital Camera Connecting a Canon digital camera with Bubble Jet Direct function to the printer allows you to print captured images directly without using a computer. Use the USB cable that came with your digital camera. Note z To print directly from a digital camera or digital video camcorder, use only Canon “Bubble Jet Direct” compatible digital cameras or digital video camcorders. z When you print directly from a digital camera, you need to operate from the camera itself. z You are recommended to use a household power source rather than the battery pack to power the camera when it is connected to a printer. If you do use a battery pack, ensure that it is fully charged. Media Types for Digital Camera You can use the following Canon media: Digital Camera Setting Media Type Card #1 Photo Paper Pro 4” x 6” / 101.6 x 152.4 mm Card #2 Photo Paper Plus Glossy 4” x 6” / 101.6 x 152.4 mm Card #3 Photo paper Plus Glossy 5” x 7” / 127 x 177.8 mm LTR Photo Paper Pro or Photo Paper Plus Glossy Letter A4 Photo Paper Pro or Photo Paper Plus Glossy A4 11 Advanced Printing Printing from a Digital Camera 1 2 Ensure that the printer is turned on. Load the paper. (1) Load the media with the more glossy surface facing up. (2) Align the media on the right. (3) Pinch the paper guide and slide it against the left side of the media. 3 Connect the printer and the digital camera. (1) Ensure that the digital camera is turned off. (2) Connect the digital camera and printer with the USB cable that came with the digital camera. The digital camera will automatically turn on. If not, turn it on. 4 Start printing using the print function of the digital camera. (1) Display the image you want to print in the Replay mode. If the camera will not change to the Replay mode, refer to your digital camera user's manual's instructions for changing the camera to the Replay mode. will display on the LCD display of the digital camera when the printer is correctly connected. (2) Press the SET button to display the Print menu. 12 Advanced Printing (3) Select Style and specify the paper size, Borderless or Bordered printing, and date printing On or Off. (4) After specifying the style, specify a number of copies, select Print and then press the SET button. Note z For the digital camera operation and troubleshooting, refer to your digital camera user's manual. For print error messages, refer to "Cannot Cannot Print Properly from the Digital Camera Camera" on page 50. z For the digital video camcorder operation, print error messages, and troubleshooting, refer to your digital video camcorder user's manual. z By operating the digital camera, you can make the following prints: - You can make a standard print from the image displayed in the single display mode or in the index display mode. - You can print specified numbers of images, or make an index print using the DPOF function. Images other than Exif may not be index printed. - The images taken with an Exif 2.2 compatible digital camera will be adjusted by using the Photo Optimizer PRO function. - If date printing is set on the digital camera, the date of photographing will be printed (excluding the index print). - Images will be scaled automatically according to the size of the media set on the digital camera. z The digital camera does not support the following functions: - Print quality setting - Maintenance *The print head cannot be aligned through the digital camera. Connect the printer to the computer, then align the print head. If the print head has not been aligned, reduce the printing speed (one-way printing) for better print quality. z To disconnect the cable connected between the digital camera and printer, follow the procedure below: 1. Disconnect the cable from the printer. 2. Turn off the digital camera. 3. Disconnect the cable from the digital camera. When disconnecting the cable, be sure to hold the connector by its sides. 13 Advanced Printing Accessing Printer Driver The Printer Properties dialog box can be opened from either within an application, or directly from the Windows Start menu. Note z This manual refers to Windows XP operation. The operations may vary depending on your operating system. z Depending on your application program, the command and menu names may differ, and there may be more steps involved in opening the Printer Properties dialog box. For more details, see the user's manual for your application. Opening the Printer Properties Dialog Box from Your Application Program 1 In your application, select the command to print a document. The Print dialog box can usually be opened by selecting Print from the File menu. 2 Ensure that the Canon i450 is selected. Then click Preferences (or Properties). The Printer Properties dialog box opens. Opening the Printer Properties Dialog Box Directly from the Start Menu This method is used for maintenance operations such as print head cleaning, or to specify printer settings common to all application programs. When the Printer Properties dialog box is opened from the Start menu, additional tabs appear, including the Details tab. These do not appear when the Printer Properties dialog box is opened from within an application. For more information about these additional tabs, refer to your Windows documentation. 1 Click Start and select Control Panel, Printers and Other Hardware, and then Printers and Faxes. For non-XP Windows, click Start, Start select Settings, Settings and then Printers. Printers 2 3 Select the Canon i450 icon. Open the File menu and select Printing Preferences (or Properties). The Printer Properties dialog box opens. 14 Advanced Printing Adjusting Print Quality for Photographs Improving Printed Images Two important factors control the quality and output of your printed images: Paper and Ink Using recommended Canon paper, speciality media, and inks for printing photographs can significantly improve the quality of your printouts. See the inside back cover for a list of Canon media and inks for this printer. Printer Driver Settings The printer driver has a variety of settings that can be used to creatively enhance the colors and output of your photographs. Many of these features are covered in this chapter. For more detailed information, see the i450 User's Guide on the Setup Software & User's Guide CD-ROM. You can also access the online help in either of the following ways depending on your operating system: • Press the F1 key • Click ? in the upper right corner, then click the feature you want to know more about. • Click the Help button when displayed. • Turn on Balloon Help by clicking Help, Help then Show Balloons. Balloons Adjusting Print Quality Features that affect the appearance and quality of your printed images can be controlled with the printer driver. The i450 automatically adjusts printer settings to improve print quality based on the media type (plain paper, Photo Paper Pro, and so on). You can also customize the Print Quality settings if desired. 15 Advanced Printing To manually adjust Print Quality settings: 1 Open the Printer Properties dialog box. See"Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 14. 2 Select Custom in Print Quality, then click Set... to open the Set Print Quality dialog box. 3 Move the slide bar to adjust the Print Quality. 4 When the process is complete, click OK. 1 Open the Print dialog box. See "Printing Printing with Macintosh" Macintosh on page 9. 2 16 Click Print Mode and select Manual, then click Details... to open the Detailed Setting dialog box. 3 Move the slide bar to adjust the Print Quality. 4 When the process is complete, click OK. Advanced Printing To automatically optimize the image: Photo Optimizer PRO automatically adjusts the photographic image created with a digital camera. Use this feature to compensate for unsatisfactory color balance and over- or under-exposure before printing. 1 2 3 4 1 2 3 4 5 Open the Printer Properties dialog box. See"Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 14. Click the Effects tab. Select the Photo Optimizer PRO check box. Click OK. Open the Print dialog box. See "Printing Printing with Macintosh" Macintosh on page 9. Click Print Mode and select Manual, then click Details... to open the Detailed Setting dialog box. Click (Special effects). Select the Photo Optimizer PRO check box. Click OK. 17 Advanced Printing To use Vivid Photo option: Vivid Photo intensifies background colors like fields, trees, oceans and skies, while maintaining natural skin tones in the images. Note In Windows Me or Windows 98 If Background Printing has been disabled, the Vivid Photo function is not available. To use Vivid Photo, select the Vivid Photo check box on the Effects tab. To use Vivid Photo, select the Vivid Photo check box under Special Effects. Effects 18 Advanced Printing To reduce noise from images captured with a digital camera: Photo Noise Reduction function reduces noise from blue portions, such as the sky and dark portions of the images captured with your digital camera. Note In Windows Me or Windows 98 If Background Printing has been disabled, the Photo Noise Reduction function is not available. To use Photo Noise Reduction, select the Photo Noise Reduction check box on the Effects tab. To use Photo Noise Reduction, select the Photo Noise Reduction check box under Effects. Special Effects 19 Advanced Printing Saving and Recalling Driver Settings When you change printer driver settings for a specific print job, such as printing black and white photos, or printing documents with a special background, you can save and name these settings for future use on similar print jobs. 1 Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box from Your Application Program" Program on page 14. 2 3 Click the Profiles tab. Enter new settings in Profiles. (1) Click Add to Profiles. The Add to Profiles dialog box opens. (2) Enter the name of profile for registering settings. (3) Select an icon. (4) Enter a description on the registering profile. 4 5 Click OK. Click OK on the Profiles tab. This registers your printer driver print settings. Note You can retrieve or delete the print settings profile at any time. Retrieving profile: Select the desired profile from Printing Profiles, and click Retrieve from Profiles. Profiles Deleting unwanted profile: Select the desired profile from Printing Profiles, and click Delete. Delete For details, click Help and refer to the topic of this function. 20 Advanced Printing 1 Open the Print dialog box. See "Printing Printing with Macintosh" Macintosh on page 9. 2 Click Apply. The Register Settings dialog box opens. 3 Enter the print settings to register. (1) Click Apply…. The dialog box to enter the new settings name opens. (2) Enter a name under which to register your settings. 4 5 Click OK. Click Close in the Register Settings dialog box. This registers your printer driver print settings. Note You can retrieve or delete the saved driver settings at any time. Retrieving print settings: Select the name of the settings to retrieve from the Settings list and click Import. Import Deleting unwanted drivers settings: Select the name of the settings to delete from the Settings list and click Remove. Remove 21 Advanced Printing Using Printer Driver Options Getting to know the basic features of your printer driver will provide you with sufficient expertise to print a wide range of images and documents. The illustrations below provide a basic introduction to the many features offered by your printer driver. Note For detailed description of the printer driver functions, refer to the User’s Guide. Printing with Borderless Printing Reducing Noise from Images Recorded with Digital Camera Smoothing the Rough Edges of Certain Images Automatically Resizing the Image to Fit the Page Resizing the Image by Selecting the Scaling Ratio 22 Adding Illustrated Effect to Documents Advanced Printing Using the Bundle Software The Setup Software & User’s Guide CD-ROM includes photo applications designed to edit the photographs taken by a digital camera and print them as photo-lab quality prints. Please use the application(s) suitable for your print purposes. Note z To install applications, refer to Easy Setup Instructions. z For details about photo applications, refer to the Photo Application Guide included on the Setup Software & User’s Guide CD-ROM. Easy-PhotoPrint (Windows/Macintosh) You can make Borderless Printing easily and quickly, just by selecting a photograph taken with a digital camera and the paper type on which to print. You can also use simple editing features such as trimming and image rotation. It is Exif Print (Exif 2.2)* compatible. Internet Explorer 4.0 or later must be installed. ImageBrowser (Macintosh) You can import photographs taken with a digital camera into the computer, edit and caption them. You can produce Borderless prints or Index prints with ease. It is Exif Print (Exif 2.2)* compatible. ZoomBrowser EX/PhotoRecord (Windows) You can import photographs taken with a digital camera into the computer, edit, add a caption and print them in an album format. PhotoRecord is Exif Print (Exif 2.2)* compatible. ** PhotoStitch (Windows/Macintosh ) You can select multiple photographs and merge them to create a panoramic photo. Easy-WebPrint (Windows) You can easily print pages displayed on the Internet Explorer or pages from the User’s Guide (on-screen manual of this printer) in full size. Easy-WebPrint automatically adjusts the layout when printing a screen. This feature enables you to print a screen without its right end being cut off. This application is a plug-in for Internet Explorer, and its toolbar is automatically added to Internet Explorer after installation. Internet Explorer 5.5 or later must be installed. *: Exif Print (Exif 2.2) is a new worldwide standard. Under Exif 2.2, the digital camera can record data tags for specific camera settings and functions such as whether the flash was on or off, if the camera was in portrait or night scene mode, etc. BJ Printers support Exif Print and use a suitable photo application to read the camera data precisely, producing optimal prints. This enables you to create prints that reproduce your vision more accurately than ever before. **: Mac OS 9 or later is supported. 23 Advanced Printing Printing Borderless Photographs with Windows This chapter describes the steps used to print from photo applications included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode. Note Media Types Suitable for Borderless Printing Media types compatible with Borderless Printing include Photo Paper Plus Glossy (LTR, 4” x 6” , 5” x 7” ), Photo Paper Pro (LTR, 4” x 6” ), Matte Photo Paper (LTR), and Glossy Photo Paper (LTR). Follow the steps below to create color prints of digital camera photographs with EasyPhotoPrint using the Borderless Printing function. Easy-PhotoPrint supports Exif Print (Exif 2.2). Easy-PhotoPrint can handle only JPEG files (filename extension: .jpg and .jpeg). 1 Start Easy-PhotoPrint. (1) Store the photographs you took with your digital camera in the folder on the hard disk. This section describes how to print photographs stored in the folder on the hard disk. 2 (2) Click Start, Utilities, Easy-PhotoPrint, Start select All Programs (or Programs), Programs Canon Utilities Easy-PhotoPrint and then Easy-PhotoPrint. Easy-PhotoPrint The 1.Image Selection sheet is displayed. Select photographs. (1) Select the folder containing the photograph you want to print. All photographs in the selected folder are displayed. Guidance Thumbnail Folder window 24 Advanced Printing (2) Click the [+] button on the thumbnail of the photograph you want to print and specify the number of copies. Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. 3 Select the paper. (1) Click the 2.Paper Selection tab. (2) Select the size of the paper you use from Paper Size. Size (3) Select the type of the paper you use from Media Type. Type 4 Select the layout. (1) Click the 3. Layout/ Print tab. (2) Select Borderless (full) (full). (3) Load the media specified in the 2.Paper Selection tab. (4) Click Print. Print 25 Advanced Printing Printing Borderless Photographs with Macintosh This chapter describes the steps used to print from photo applications included with your Setup Software and User’s Guide CD-ROM using the Borderless Printing mode. Note Media Types Suitable for Borderless Printing Media types compatible with Borderless Printing include Photo Paper Plus Glossy (LTR, 4” x 6” , 5” x 7” ), Photo Paper Pro (LTR, 4” x 6” ), Matte Photo Paper (LTR) and Glossy Photo Paper (LTR). Follow the steps below to create color prints of digital camera photographs with EasyPhotoPrint using the Borderless Printing function. Easy-PhotoPrint supports Exif Print (Exif 2.2). Easy-PhotoPrint can handle only JPEG files (filename extension: .jpg and .jpeg). 1 Start Easy-PhotoPrint. (1) Store the photographs you took with your digital camera in the folder on the hard disk. This section describes how to print photographs stored in the folder on the hard disk. 2 (2) Open the Easy-PhotoPrint folder, and double-click the Easy-PhotoPrint icon in the folder. Select photographs. (1) Select the folder containing the photograph you want to print. All photographs in the selected folder are displayed. Guidance Thumbnail Folder window 26 Advanced Printing (2) Click the [+] button on the thumbnail of the photograph you want to print and specify the number of copies. Increases the number of copies. Displays the specified number of copies. Decreases the number of copies. 3 Select the paper. (1) Click the 2.Paper Selection tab. (2) Select the size of the paper you use from Paper Size. Size (3) Select the type of the paper you use from Media Type. Type 4 Select the layout. (1) Click the 3. Layout/ Print tab. (2) Select Borderless (full). (full) (3) Load the media specified in the 2.Paper Selection tab. (4) Click Print. Print 27 Printing Maintenance Printing Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the print head nozzles are probably clogged. Follow the procedures below to clean the nozzles. Step 1 "Printing Printing the Nozzle Check Pattern Pattern" on page 29 If the problem remains Step 2 "Print Print Head Cleaning" Cleaning on page 31 If white stripes are noticeable Step 2 "Aligning Aligning the Print Head" Head on page 35 If the problem remains Step 3 "Print Print Head Deep Cleaning Cleaning" on page 33 If the problem still remains Step 4 "Replacing Replacing an Ink Tank" Tank on page 38 Note 28 z If ink tank replacement does not resolve the problem, contact the Customer Care Center. z You will be alerted if low ink warning is enabled. Printing Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles, and to verify print head alignment. Use this function when printed results are blurred or the color is incorrect. Note 1 2 Nozzle check pattern printing can be executed also from the printer itself. With the printer on, load a sheet of A4 or Letter paper in the printer. Hold the RESUME/CANCEL button until the POWER lamp flashes twice. With the printer on, load a sheet of Letter paper in the printer. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 14. 3 Print the Nozzle Check Pattern. (1) Click the Maintenance tab. (2) Click Nozzle Check. Check (3) When the confirmation message is displayed, click OK. OK See "Examining Examining the Nozzle Check Pattern" Pattern on page 30. 29 Printing Maintenance 1 2 With the printer on, load a sheet of Letter paper in the printer. Open the Printer Utility dialog box. (1) Select Page Setup... in the File menu. 3 (2) Click Utilities to open the Printer Utility dialog box. Print the Nozzle Check Pattern. (1) Select Test Print from the pull-down menu. (2) Click Nozzle Check Check. (3) When the confirmation message is displayed, click OK. OK See "Examining Examining the Nozzle Check Pattern" Pattern on page 30. Examining the Nozzle Check Pattern The nozzle check pattern should appear as follows when ink is discharged properly. Examine the nozzle check pattern output by the printer. (1) Lines missing here indicate the print head requires cleaning. See "Print Print Head Cleaning" Cleaning on page 31. (2) Unevenness in these patterns indicates the print head reguires alignment. See "Aligning Aligning the Print Head" Head on page 35. 30 Printing Maintenance Print Head Cleaning Clean the print head if you suspect that the nozzles might be clogged. Cleaning the print head consumes ink, so perform print head cleaning only when necessary. 1 2 Ensure that the printer is on. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 14. 3 Start Print Head Cleaning. (1) Click the Maintenance tab. (2) Click Cleaning. Cleaning (3) Select the ink nozzles to be cleaned, and then click Execute. Execute (4) When the confirmation message is displayed, click OK. OK 31 Printing Maintenance 1 2 Ensure that the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup... Setup in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Cleaning. Cleaning (3) Select the ink nozzles to be cleaned, and then click OK. OK (4) When the confirmation message is displayed, click OK. OK Important Do not perform any other operations until the print head cleaning finishes. This takes about 50 seconds. Note z Print head cleaning can be performed also from the printer itself. Ensure that the printer is on. Hold down the RESUME/CANCEL button until the POWER lamp flashes once. z After print head cleaning finishes, print the nozzle check pattern to verify that the print head nozzles are clean. See "Printing Printing the Nozzle Check Pattern" Pattern on page 29. If the problem persists, perform print head deep cleaning. See "Print Print Head Deep Cleaning" Cleaning on page 33. 32 Printing Maintenance Print Head Deep Cleaning If print quality does not improve by standard print head cleaning, try print head deep cleaning, which is a more powerful process. Print head deep cleaning consumes ink, so perform this procedure only when necessary. 1 2 Ensure that the printer is on. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 14. 3 Start Print Head Deep Cleaning. (1) Click the Maintenace tab. (2) Click Deep Cleaning. Cleaning (3) Select the ink nozzles to be cleaned, and then click Execute. Execute (4) When the confirmation message is displayed, click OK. OK 33 Printing Maintenance 1 2 Ensure that the printer is on. Open the Printer Utility dialog box. (1) Select Page Setup… in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 3 Start Print Head Deep Cleaning. (1) Select Cleaning from the pulldown menu. (2) Click Deep Cleaning. Cleaning (3) Select the ink nozzles to be cleaned, and then click OK. OK (4) When the confirmation message is displayed, click OK. OK Important The process takes about one minute to complete, so simply wait until the POWER lamp stops flashing. Note After print head deep cleaning finishes, print the nozzle check pattern to verify that the print head nozzles are clean. See "Printing Printing the Nozzle Check Pattern" Pattern on page 29. If the head is still not clean after the second deep cleaning, replace the ink tank. See "Replacing Replacing an Ink Tank" Tank on page 38. If ink tank replacement does not resolve the problem, the print head may be worn out. Contact the Customer Care Center. 34 Printing Maintenance Aligning the Print Head Aligning the print head position allows you to print without shifts in the color registration. 1 With the printer on, load a sheet of Letter paper in the printer. Move the paper thickness lever to the left position. 2 Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 14. 3 Print the pattern. (1) Click the Maintenance tab. (2) Click Print Head Alignment. Alignment (3) When the confirmation message is displayed, click OK. OK (4) After the pattern is printed, click Yes. Yes 35 Printing Maintenance 4 Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter the number that corresponds. (2) Enter the numbers. (3) Click OK. OK Note If it is difficult to pick up the best pattern on Column H, pick the setting that produces the least noticeable vertical white stripes. Less noticeable white stripes More noticeable white stripes (4) When the confirmation message is displayed, click OK. OK 1 With the printer on, load a sheet of Letter paper in the printer. Move the paper thickness lever to the left position. 2 Open the Print Utility dialog box. (1) Select Page Setup… in the File menu. (2) Click Utilities to open the Printer Utility dialog box. 36 Printing Maintenance 3 Print the pattern. (1) Select Test Print from the pull-down menu. (2) Click Print Head Alignment. Alignment 4 (3) When the confirmation message is displayed, click OK. OK Align the Print Head. (1) Look at the print out. From the patterns, select the most even, least irregular patterns and enter the number that corresponds. (2) Enter the numbers. (3) Click Send. Send Note If it is difficult to pick up the best pattern on Column H, pick the setting that produces the least noticeable vertical white stripes. Less noticeable white stripes More noticeable white stripes 37 Printing Maintenance Replacing an Ink Tank When replacing an ink tank, check the model number very carefully. The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position. Black: BCI-24 Black Color: BCI-24 Color Replacing an Ink Tank When an ink tank runs out of ink, replace it using the following steps. 1 Ensure that the printer is on, and then open the front cover. The print head holder moves to the left. 2 Remove the empty ink tank. Color Black Important z Handle ink tanks carefully to avoid staining clothing or the surrounding area. z Discard empty ink tanks according to the local laws and regulations regarding disposal of consumables. 38 Printing Maintenance 3 Prepare a replacement ink tank. (1) Unpack a new ink tank and remove the orange protective cap. Important z Do not re-attach the protective cap once you have removed it. z Once the protective cap is removed, do not touch the open ink port. 4 Insert the ink tank. (1) Insert a new ink tank into a slot. (2) Push in the tab until the ink tank snaps firmly into place. 5 Close the front cover. The print head holder moves to the right. Note z To maintain optimal print quality, use an ink tank within six months of its first use. z Once an ink tank has been used, do not remove it from the printer and leave it out in the open. This will cause the ink tank to dry out and the printer may not function properly if it is reinstalled. z Color ink consumption may occur even when black-and-white or grayscale printing is specified. Color ink is consumed in the head cleaning and deep cleaning, which are necessary to maintain the printer’s capabilities. z When an ink tank runs out of ink, replace the ink tank with a new one immediately. If printing is continued with no ink in the ink tank, a trouble may occur. 39 Printing Maintenance Resetting the Ink Counter When an ink tank is replaced, the ink counter must be reset. The low ink warning is only displayed properly if the ink counter is reset. Message Prompting Confirmation of Ink Tank Replacement 1 When the front cover remains open for a certain period of time, the printer will output a message prompting you to confirm replacement of the ink tank at the start of the next print job. Check the message, and click Yes or OK. When using Windows: 2 When using Macintosh: Select the replaced ink tank, and click OK. The dialog box allows you to select the replaced ink tank. When both black and color ink tanks have been replaced, select both Black and Color. If you have not replaced the ink tank with a new one, click Cancel. Cancel When using Windows: When using Macintosh: Important Mistakenly clicking No or Cancel, Cancel instead, will prevent the Ink Low alert from functioning properly. If this happens, manually reset the ink counter according to the following procedure. Resetting the Ink Counter in Printer Properties dialog box: z When using Windows: 1. Open the Printer Properties dialog box and click the Maintenance Tab. 2. Click Ink Counter Reset Reset. 3. Select the newly installed ink tank, then click OK. OK z When using Macintosh: 1. Open the Page Setup dialog box. 2. Click Utilities and select Low Ink Warning Setting. Setting 3. Click Ink Counter Reset Reset. 4. Select the newly installed ink tank, then click OK. OK 40 Printing Maintenance How Low Ink Warning Setting Works The low ink warning notifies you of low ink levels during printing. The Low Ink Warning has been preset to be automatically displayed. When you reset the ink counter, it will assume that the ink tank is full regardless of how much ink actually remains. The reset is the only way to match the counter value with an actual ink volume. Reset the ink counter when installing a new ink tank. Low Ink Warning Display The '!' shows a low ink level in the ink tank. BJ Status Monitor (Windows) BJ Status Dialog (Macintosh) The color ink becomes low. How to Display Low Ink Warning Correctly • Reset the ink counter every time you install a new ink tank. The ink counter cannot work correctly unless you synchronize it with the actual ink level. The ink counter can only be adjusted when it is reset at the time a new ink tank is installed. • Do not reset the ink counter of an ink tank in use. Synchronization of the counter and the actual ink level will not work properly. Important If you did not reset the counter when you installed the current ink tanks, the low ink warning may not function correctly, until the next time you replace the ink tanks. Also, be sure to treat both counters separately. Refer to "Low Low Ink Warning Accompanied by Ink Tank Icon With '?' '?'" on page 49. 41 Troubleshooting Troubleshooting Troubleshooting usually falls into one of the following categories. In this chapter you will find the most common printing problems. Refer to the User's Guide for additional information on topics not covered in this section. • "Cannot Cannot Install the Printer Driver" Driver on page 43 • "Print Print Quality is Poor or Contains Errors Errors" on page 44 • "Troubleshooting Troubleshooting Printer Hardware" Hardware on page 45 • "Paper Paper Does Not Feed Properly" Properly on page 46 • "Handling Handling Error Messages" Messages on page 47 • "An An Error Message Appears on the Screen" Screen on page 48 • "Cannot Cannot Print Properly from the Digital Camera" Camera on page 50 Note If you encounter any problem during installation or operation of your printer, quickly scan all topics to find a resolution. If the problem persists, contact the Customer Care Center. See "Canon Canon offers a full range of customer technical support options" options on page 60. When Error Occurs The BJ Status Monitor opens and displays a message. Take the appropriate action described in the message. The message may vary depending on your operating system. z When using Windows Me or Windows 98, click the Guide tab and follow the on-screen instructions. 42 Troubleshooting Cannot Install the Printer Driver Problem Possible Cause Cannot Install the Installation Printer Driver procedure not followed correctly Try This Follow the Easy Setup Instructions for proper printer driver installation. If the installer was forced to terminate due to an error, remove the CD-ROM from the CD-ROM drive and restart your computer. Reinstall the printer driver. If this problem persists, contact the Customer Care Cener. Other applications running in the background Other applications opened on your computer can interfere with the installation routine. Close all open software applications before reinstalling the printer driver. Refer to the Easy Setup Instructions for installing the printer driver. Installation does not start automatically when the CD-ROM is inserted into the drive If printer driver installation did not start automatically when you inserted the CDROM into the CD-ROM drive: 1. Click Start and select My Computer Computer. 2. Double-click the CD-ROM icon. For non-XP Windows, open the My Computer window, and then double-click the CD-ROM icon. Double-click the CD-ROM icon on your desktop to start installation. Installation CDROM not working properly Confirm that there are no problems with the Setup Software & User’s Guide CDROM. Use Windows Explorer to confirm that the CD-ROM can be read. Confirm that the CD-ROM icon is displayed on the desktop. If there is any problem with the CD-ROM, CD-ROM contact the Customer Care Center. Unable to proceed beyond the Printer Port Screen Reinstall the printer driver 1. Click Cancel. Cancel 2. When the Terminate Installation screen is displayed, click OK. OK 3. Click Exit, Exit then remove the CD-ROM. 4. Turn the printer off. 5. Restart the computer. 6. Carefully follow the procedures described in the Easy Setup Instructions and reinstall the driver. 43 Troubleshooting Print Quality is Poor or Contains Errors Problem Possible Cause Ink does not eject properly/Printing is Blurred/ Colors are Wrong / White Streaks appears / Printed Ruled Lines are Displaced Ink tank is not seated properly Print head nozzles clogged Try This Check that the ink tanks are firmly seated in the print head and reseat them if necessary. Print the nozzle check pattern to check for uneven ink output. See "Printing Printing the Nozzle Check Pattern" Pattern on page 29. When a specific color is missing from the nozzle check pattern, clean the print head. If ink supply is uneven: See "Print Print Head Cleaning" Cleaning on page 31. Media not loaded with Check that your paper is loaded with the correct print side facing up. the print-side up Note Follow the instructions packaged with your speciality media for loading and handling. Incorrect paper type On the Main tab, confirm that the Media Type selected matches the paper loaded. Print Quality not set properly In the Print dialog box, confirm that the Media Type selected matches the paper loaded. Be sure to set the Print Quality setting to High for Windows or Fine for Macintosh. On the Main tab, click High for the Print Quality setting. Printed Paper Curls or Ink Blots Paper being used is too thin Color Intensity setting is too high 1. Select Manual in the Print Mode pull-down menu in the Print dialog box and then click Details. Details 2. Click the Quality icon and then drag the Print Quality slide bar to the Fine end. Use High Resolution Paper or Photo Paper Pro to print images that require a lot of ink (i.e. pictures with intense colors or photographs). Reduce the Intensity setting in the printer driver and try printing again. 1. Open the Printer Properties dialog box. 2. On the Main tab, select Manual for Color Adjustment, Adjustment and then click Set. Set 3. Drag the Intensity slide bar to adjust the intensity. Paper feed roller is dirty Printed Surface is Scratched Inappropriate paper type used 1. Open the Print dialog box. 2. In the Print Mode pull-down menu, select Manual and then click Details. Details 3. Click the Color icon, then drag the Intensity slide bar to set the intensity. Clean the paper feed roller. See "Paper Paper Does Not Feed Properly" Properly on page 46. Check to see if the paper you are printing on is too thick or curled. See "Print Print Media to Avoid" Avoid on page 3. Note that smudging may occur at the top and bottom edges of the paper when using Borderless Printing. Ensure that the paper you are using is compatible with Borderless Printing. See "Media Media Types Suitable for Borderless Printing" Printing on page 24 See "Media Media Types Suitable for Borderless Printing" Printing on page 26 44 Troubleshooting Troubleshooting Printer Hardware Problem Printer Does Not Start or Printer Stops During Print Jobs Possible Cause Try This Print head has overheated due to long periods of continuous printing Stop printing and turn the printer off for at least 15 minutes to allow the print head to cool down. The print head tends to overheat when printing continuously for long periods of time. The print head is designed to automatically pause at line breaks before resuming printing in order to cool down. Caution The area around the print head can become extremely hot during extended print operation. Always avoid touching the print head and its peripheral components. Printing highresolution photographs and graphics Wait until the print job finishes. The POWER lamp flashes green while the print data is being processed. Printing photographs and high-density graphics can take time. Printer cable is too long Avoid using USB cables longer than 16.4 feet. There may be problems in your operating system Restart your computer. It may solve the problem. Delete an undesired print job if there is any. Use BJ Status Monitor in Windows or BJ Print Monitor in Macintosh for the deletion. 1. Open the Printer Properties dialog box. See "Opening Opening the Printer Properties Dialog Box Directly from the Start Menu" Menu on page 14. 2. Click Maintenance tab and then Start Status Monitor. Monitor 3. Click Display Print Queue Queue. 4. Select Cancel All Documents in the Printer menu. Click Yes when a confirmation message appears. The print job is deleted. Note In Windows Me or Windows 98 Click to select an undesired document and select Purge Print Documents in the Printer menu. 1. Double-click BJ Print Monitor in the Extensions in the System Folder. 2. Click to select an undesired document and click The print job is deleted. Cannot Print to End of Job Incorrect page size selected . Verify that the page size setting matches the size of the paper loaded in the printer: - Check the Paper Size setting from within your application to ensure that it matches the size of the paper loaded. - Check the Page Setup tab in the Printer Properties dialog box (for Windows) or the Page Setup dialog box (for Macintosh) to ensure that it matches the size of the paper loaded. Not enough free space on hard disk Your operating system may be out of free disk space. Check the available space on your computer’s hard disk. 45 Troubleshooting Paper Does Not Feed Properly Problem Paper Does Not Feed Properly Possible Cause Try This Inappropriate paper type used Check to see if the paper you are printing on is too thick or curled. See "Print Print Media to Avoid Avoid" on page 3. Paper feed roller is dirty Follow the steps described below to clean the paper feed rollers. If envelopes or post cards do not feed properly, even after correcting any paper curl, clean the paper feed roller. 1. Ensure that the printer is on and there is no paper loaded in the printer. 2. Hold the RESUME/CANCEL button down and release after the POWER lamp flashes three times. The paper roller rotates as it cleans. Repeat this cleaning operation three times. 3. Load a sheet of Letter plain paper in the printer. 4. Hold the RESUME/CANCEL button down and release after the POWER lamp flashes three times, then feed the sheet of paper. Repeat this operation three times. If the printer still does not feed the envelopes or the post cards properly through the printer, even after the cleaning operation, repeat the procedure. Paper Jams 1. Gently pull the jammed paper out of the sheet feeder slot or the paper output slot, whichever is easier. • If the paper tears and some of it is left in the printer, turn the printer off, then open the front cover and remove the piece of paper. Do not touch internal parts in the printer. If you cannot reach or remove the torn paper, do not attempt to disassemble the printer yourself. Contact the Customer Care Center. • If you cannot extract the paper, turn the printer off, and then turn it back on. The remaining paper will be ejected automatically. 2. Close the front cover and reload the paper into the sheet feeder, then press the RESUME/CANCEL button on the printer. 46 Troubleshooting Handling Error Messages When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes indicates the type of error that has occurred. Count the flashes and take the appropriate action to correct the error. Number of Flashes Possible Cause Try This Two flashes Printer is out of paper Reload paper and press the RESUME/CANCEL button. Three flashes Paper jam If a paper jam occurs, clear the jammed paper, reload paper in the printer, then press the RESUME/CANCEL button. See "Paper Paper Jams" Jams on page 46. Six flashes Print head not installed Install print head. Seven flashes Defective print head Press the POWER button to turn off the printer, and press the POWER button again to turn on the printer. If the same error occurs, the print head may be defective. Contact the Customer Care Center. Eight flashes Waste ink tank almost full The printer has a built-in waste ink tank to hold the ink consumed during print head cleaning. Eight flashes indicates that this tank is nearly full. Press the RESUME/CANCEL button to clear the error so printing can continue. Contact the Customer Care Center. Eleven flashes A specified period of time has lapsed without receiving no response from the digital camera / The digital camera or digital video camcorder connected is not compatible with this printer Press the printer's RESUME/CANCEL button. After the error has cleared, the digital camera or digital video camcorder turns on. If the camera is not of a type that turns on automatically, be sure to turn the power on manually. If the error is not fixed, disconnect the camera cable, press the printer's RESUME/ CANCEL button and reconnect the cable. If the error is still unresolved, there is a possibility that you are using a digital camera or digital video camcorder that is not supported by this printer. Use Canon "Bubble Jet Direct" compatible digital cameras or digital video camcorders. Note POWER lamp flashes alternately green and orange An error that requires contacting the Customer Care Center may have occurred. Disconnect the printer cable from the printer, and then turn the printer off and unplug the printer from the power supply. Plug the printer back in and turn the printer back on after leaving it about 10 minutes. If the problem remains, contact the Customer Care Center. 47 Troubleshooting An Error Message Appears on the Screen Problem Possible Cause Try This Printer not ready The POWER lamp will flash green when the printer is warming up or when a print job is being sent to the printer. It will glow a steady (non-flashing) green when it is ready for use or when the print job is completed. Paper is not loaded Load paper and press the RESUME/CANCEL button. Faulty connection Ensure that the printer cable is securely connected to the computer. Error Writing / Output to USBxxx Note If you are using switching hub or other device, disconnect the printer and reconnect it directly to the computer and try printing again. If successful, the problem may have been with the device. There could also be a problem with the cable(s). Replace the cable(s) and try printing again. Printer port error Verify the printer port status. Double-click Universal Serial Bus (USB) controllers on the Device Manager dialog box, then double-click Canon i450 to see the status. Refer to the User's Guide for instructions on how to verify the status. Printer port settings and printer interface do not match Confirm that the destination Printer Port is set to USB PRNnn (Canon i450) or USBnn (Canon i450) (Where nn represents a number). If the settings are not correct, follow the procedures described in the Easy Setup Instructions and reinstall the printer driver. Refer to the User’s Guide for instructions on how to verify status and the correct action to take. Printer driver is not installed properly Uninstall then reinstall the printer driver. 1. Click Start, Start and select All Programs (or Programs), Programs Canon i450, i450 and Uninstall. Uninstall 2. Follow the on-screen instructions to uninstall driver. 3. Follow the procedures described in the Easy Setup Instructions and reinstall the printer driver. “Error No.: X202” Not enough memory Increase available memory by closing any other applications currently running. Printer driver fault Uninstall, then reinstall printer driver. Refer to the User’s Guide for instructions on how to uninstall the printer driver. Printer not ready If the POWER lamp is off, turn the printer on. If the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing. “Error No.: X203” “Error No.: X300” Printer not properly Ensure that the printer is securely connected to the computer. connected Note If you are using switching hub or other device, disconnect the printer and reconnect it directly to the computer and try printing again. If successful, the problem may have been with the device. There could also be a problem with the cable(s). Replace the cable(s) and try printing again. Printer not selected 1. From the Apple menu, select Chooser. Chooser in Chooser 2. Click the i450 icon and ensure that the i450 is selected as the target connection. If not, select it. Note 48 If the problem persists, delete all unnecessary documents from the Extensions and Control Panels folder. Troubleshooting Problem Have you replaced ink tank with a new one? message appears Possible Cause Try This If the ink tank has been replaced with a new one Click Yes or OK to reset the ink counter. See "Resetting Resetting the Ink Counter" Counter on page 40. If the front cover Click No or Cancel on the dialog box described above. has been open for a certain period (the You can choose the option to disable the display of this confirmation message. ink tank has not been replaced) 1. Ensure that the printer is on and open the Printer Properties dialog box. 2. On the Maintenance tab, click Low Ink Warning Setting. Setting 3. Clear a check box of Display a confirmation message of Ink tank replacement and click Send. Send 1. Ensure that the printer is on and open the Page Setup dialog box. 2. Click Utilities to open the Printer Utility dialog box. 3. Select Remaining Ink level Setting from the pull-down menu and click Low Ink Warning Setting. Setting 4. Clear a check box of Display a confirmation message of Ink tank replacement and click Send. Send Low Ink Warning Accompanied by Ink Tank Icon With '?' Failure to reset ink counter when installing new ink tank The ink tank level accompanied by the ink tank icon with the “?” indicates ink tank is not synchronized with its ink counter. Always be sure to reset the ink counter in your printer driver when you replace ink tank. See "Resetting Resetting the Ink Counter" Counter on page 40. Note A“?” is displayed next to the Ink counter between the time one ink tank is removed and the ink counter is reset when the next one is installed. Display of the “?” can be disabled by unchecking the Display low Ink Warning check box. 1. Ensure that the printer is on and open the Printer Properties dialog box. 2. On the Maintenance tab, click Low Ink Warning Setting icon. 3. Clear a check box of Display low ink warning off and click Send. Send 1. Ensure that the printer is on and open the Page Setup dialog box. 2. Click Utilities to open the Printer Utility dialog box. 3. Select Remaining ink level setting from the pull-down menu and click Low Ink Warning Setting. Setting 4. Clear a check box of Display low ink warning off and click Send. Send 49 Troubleshooting Cannot Print Properly from the Digital Camera The following messages may be displayed on the digital camera or digital video camcorder when images are printed directly from them. Correct the error according to the procedure below. Camera Error Message Possible Cause Try This Printer in use Images are printed from the computer. Wait until printing ends. The printer automatically starts printing the images from the camera after completing the current printing. Printer warming up The printer is warning up. Wait until warm-up ends. When it is ready, the printer starts printing automatically. No Paper No paper is loaded. Load the paper in the printer and press the RESUME/CANCEL button on the printer. Paper Jam A paper jam occurrs in the printer. Remove the jammed paper, load new media, and press the RESUME/CANCEL RESUME CANCEL button. Printer cover open The front cover is open. Close the front cover. No print head No print head is installed. (The POWER lamp on the printer flashes six times.) Install a print head according to the Easy Setup Instructions. The print head is defective. (The POWER lamp on the printer flashes seven times.) Contact the Customer Care Center. Waste tank full The waste ink tank is nearly full. Press the RESUME/CANCEL button on the printer to recover from the error. Contact the Customer Care Center as soon as possible. Paper lever error Incorrect position of the paper thickness lever. Open the front cover and adjust the paper thickness lever to the left position. Printer error An error requiring servicing has occured. (The POWER lamp on the printer flashes alternately orange and green.) Turn off the printer, unplug the power cord from the power supply, plug the power cord back in, and then turn on the printer. If the same error occurs, contact the Customer Care Center. 50 Troubleshooting Note z Images can be printed directly from Canon "Bubble Jet Direct" compatible digital cameras and digital video camcorders connected to this printer. z If the connected digital camera or digital video camcorder does not support "Bubble Jet Direct", the POWER lamp on the printer flashes eleven times. If this happens, disconnect the connection cable and press the RESUME/ CANCEL button. z If the operation time or data transmission time is too long when the digital camera or digital video camcorder is connected to this printer, a communication time error may occur and no more images can be printed. If this error occurs, press the RESUME/CANCEL button. They will automatically turn on. If not, turn it on. z A low ink warning is not displayed on the digital camera’s viewer. z After replacing an ink tank, cancel the connection with the digital camera and reset the ink counter by operating the computer. See "Resetting Resetting the Ink Counter Counter" on page 40 If the ink counter is not reset, the remaining ink level may not be displayed properly. z For more details, also refer to the user's manual for the digital camera or digital video camcorder. If there is a problem with the digital camera or digital video camcorder, contact the Customer Care Center. 51 Appendix Appendix Installing the Printer Driver when using Mac OS 9.x When using other than Mac OS X (Mac OS 8.6 to 9.x), install the printer driver following the procedure below. Screen shots may differ depending on the operating system used. 1 2 3 4 5 Turn on your Mac and insert the Setup Software & User’s Guide CD-ROM. TURN THE PRINTER ON. Open the Mac OS 8.6-9.x folder on the CD-ROM, then double–click the Printer Driver folder. Double-click the Installer icon in the Printer Driver folder. Read the License Agreement and click Accept, if you agree. Click Install. The printer driver will load automatically. 6 If the message “No other applications can be running…” displays, click Continue. 7 When the “Installation was successful” screen displays, click Restart. 8 From the Application folder, double-click on the software to be installed. Follow the on-screen instructions. 9 When the “Installation has Finished” screen appears, click OK. 10 When prompted, restart your computer. 11 Select the Apple menu, then Chooser. 12 Click the i450 icon in the Chooser. 13 Close the Chooser. Note Register your product at www.registercanon.com to ensure product support. 14 To ensure highest quality output, continue with Step 7 Align the Print Head on the Easy Setup Instructions. 52 Appendix User’s Guide Table of Contents Your printer’s User’s Guide offers detailed information on the following topics. How to Use This Manual Printer Parts and Their Function Useful Printing Techniques Printing with Borderless Printing Reducing Noise from Images Captured with Digital Camera Achieving Vivid Reproduction of Images with Lots of Greens and Blues Printing with Color and Brightness Automatically Optimized Adjusting Print Quality Smoothing the Rough Edges of Certain Images (Windows) Automatically Resizing the Image to Fit the Page Resizing the Image by Selecting the Scaling Ratio Printing Multiple Pages on a Single Page Enlarging a Document by Printing it on Multiple Pages Printing Multiple Pages for Assembly into a Booklet Printing on Both Sides of the Page Printing Stamped Messages on Documents (Windows) Printing Background Images on Documents (Windows) Adding Illustrated Effect to Documents Printing Entire Image in Single Color Printing in Grayscale Reversing the Page Printing Order Printing on Nonstandard Size Paper Reducing the Sound of Printer Operation Registering Printer Driver Settings Photo Paper Pro Photo Paper Plus Glossy Matte Photo Paper Transparencies T-Shirt Transfers Checking the Status of the Printer BJ Status Monitor Functions BJ Print Monitor Troubleshooting Cannot Install Printer Driver Print Quality is Poor Printer Does Not Start or Stops During Print Jobs Paper Does Not Feed Properly or Paper Jams The POWER Lamp Flashes Orange An Error Message is Display on the Screen Cannot Print Properly from the Digital Camera Problems Unique to Windows Problems Unique to the Macintosh Appendix Printing Area Using the Printer with a Network Uninstalling the Printer Drivers Uninstalling the User’s Guide Transporting printer Printer Driver Functions (Windows) Printer Driver Functions (Macintosh) Printing Media Compatible Media Types Envelopes High Resolution Paper Glossy Photo Paper 53 Appendix Specifications Printer Printing resolution: 4800 X 1200 dpi. max. (Ink droplets can be placed in a pitch of 1/4800 inch at minimum.) Print speed * *Print speed may vary with the content of the document and the processing speed of the host computer. Black printing Draft: 18 ppm Standard: 11.8 ppm Color printing Draft: 12 ppm Standard: 4.9 ppm Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 216 mm / 8.5 in) Resident print control mode: Canon extended mode Receive buffer: 56 KB Interface: USB Acoustic noise level: Approx. 45 dB (A) (in the highest print quality mode) Operating environment: Temperature: 5 to 35°C (41 to 95°F) Humidity: 10 to 90%RH (no condensation) Storage environment: Temperature: 0 to 40°C (32 to 104°F) Humidity: 5 to 95% RH (no condensation) Power supply: AC 100-127 V, 50/60 Hz AC 220-240 V, 50/60 Hz Power consumption: Standby: Approx. 2 W Printing: Approx. 16 W Dimensions (with the paper rest and paper output tray retracted): 15.47 (W) X 10.16 (D) X 7.95 (H) in Weight: Approx. 3.7 kg (8.16 lb.) Graphic image printing: Data format: Canon extended mode: Raster image format Resolution: Canon extended mode: 300, 600, 1200, 4800 dpi Print Head: Black: 320 nozzles (600 dpi) Cyan, Magenta, Yellow: 256 nozzles per each color (600 dpi) Ink Tanks: Capacity (pages): Black (BCI-24 Black) approx. 300*1, approx. 580*2 Color (BCI-24 Color) approx. 160*2 *1 1500 characters per page, normal text, at standard and plain paper mode with Windows XP printer driver *2 Based on printing the ISO JIS-SCID No.5 pattern at standard and plain paper mode with Windows XP printer driver 54 Appendix Camera Direct Print Interface Camera Port (Connect a Canon “Bubble Jet Direct” compatible digital camera or digital video camcoder using the USB cable supplied with the camera.) Compatible digital cameras and digital video camcorders Canon “Bubble Jet Direct” compatible digital cameras and digital video camcorders Compatible Paper Card #1 (Photo Paper Pro 4” x 6” /101.6 x 152.4 mm), Crad #2 (Photo Paper Plus Glossy 4” x 6” /101.6 x 152.4 mm ), Card #3 (Photo Paper Plus Glossy 5” x 7” /127.0 x 177.8 mm), LTR (Photo Paper Pro or Photo Paper Plus Glossy Letter), A4 (Photo Paper Pro or Photo Paper Plus Glossy A4) Layout Print Standard: Borderless / with border, Index Print: 15-80 images Print Quality 1 level Effect Exif Print DPOF Functions Ver. 1.00 compatible (Index print, number of copies, select images, print special characters (date/image no.)) BJ Printer Driver Systems Requirements z Use a computer equipped on which Windows XP, Windows z Use a Macintosh series computer equipped with USB 2000, Windows Me, Windows 98 can operate. interface on which Mac OS 8.6-9.x or Mac OS X v.10.2.1 or later can operate. z USB interface z Available hard-disk space for printer driver installation z Available hard-disk space for printer driver installation Mac OS 8.6-9.x: 30 MB Windows XP/Windows 2000: 50MB Mac OS X v.10.2.1 or later: 110 MB Windows Me/Windows 98/Windows 95: 15MB z The following functions are not supported when using USB operation can only be guaranteed on a PC with preMac OS X v.10.2.1 or later: installed Windows XP, Windows 2000, Windows Me, or Windows 98. (This includes Windows XP, Windows 2000, or - Duplex Printing Windows Me upgraded from pre-installed Windows 98 or - Photo Optimizer PRO later) Additional Systems Requirements for User's Guide z z z z Pentium®‚ Pentium ‚ 75 MHz equivalent or higher processor (Pentium®‚ (Pentium ‚ 133MHz equivalent or higher processor recommended ) 2x or higher CD-ROM drive (4x or higher recommended) 20 MB of available hard-disk space Microsoft Internet Explorer 5.0 or later 55 Appendix Safety Precautions Please read the safety warnings and cautions provided in this manual to ensure that you use your printer safely. Do not attempt to use printer in any way not described in this manual. Warning You may cause an electric shock/fire or damage the printer if you ignore any of these safety precautions. Choosing a location Do not place the printer close to flammable solvents such as alcohol or thinners. Power supply Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Always push the plug all the way into the power outlet. Never damage, modify, stretch or excessively bend or twist the power cord. Do not place heavy objects on the power cord. Never plug the printer into a power socket that is shared with other equipment (extension lead/cord, 2- or 3- way adapter, etc.). Never use the printer if the power cord is bundled or knotted. If you detect smoke, unusual smells or strange noises around the printer, immediately unplug the printer at the power supply and call for service. Periodically, unplug the printer and use a dry cloth to wipe off any dust or dirt collected on the plug and the power outlet. If the printer is placed at a location exposed to a lot of dust, smoke, or high humidity, the dust collected on the plug absorbs moisture and may cause insulation failure and fire. fire Cleaning the printer Use a damp cloth to clean the printer. Never use flammable solvents such as alcohol, benzene or thinners. If flammable solvents come in contact with electrical components inside the printer, it could cause a fire or electric shock. Always unplug the printer from the power outlet before cleaning the printer. If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the printer. Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside the printer. The printer contains high-voltage components. Never attempt any maintenance procedure not described in this guide. Working around the printer 56 Do not use flammable sprays near the printer. This could cause a fire or electric shock if the spray comes into contact with electrical components inside the printer. Appendix Caution You may cause injury or damage the printer if you ignore any of these safety precautions. Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration. Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source. To avoid the risk of fire or electric shocks, install the printer in a location with an ambient temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free). Do not place the printer on a thick rug or carpet. When moving the printer, carry the printer at both ends. Power supply Ensure that the area around the power outlet is kept clear at all times so you can easily unplug the power cord if necessary. Never remove the plug by pulling on the cord. Do not use an extension lead/ cord. Never use a power supply source other than the one rated for the printer in the country where you purchased the printer. AC 100-127 V, 50/60 Hz AC 220-240 V, 50/60 Hz Working around the printer Never put your hands or fingers in the printer while it is printing. Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, thinners, etc.) on top of the printer. If any foreign object (mental or liquid) fall into the printer, unplug the power cord and call for service. Print heads and ink tanks For safety reasons store print heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately. Do not shake print heads or ink tanks. Ink may leak out and stain clothing or the surrounding area. Never touch the electrical contacts on a print head after printing. The metal parts may be very hot and could cause burns. 57 Appendix Regulatory Information Color Printer Model: K10224 (i450 (i450) i450) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules. Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 1-516-328-5600 Canadian Radio Interference Regulations This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada. Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 édictée par l’Industrie Canada. 58 Appendix CANON LIMITED WARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon-brand printer or scanner (each a “Product”) packaged with this limited warranty, when purchased and used in the United States only. The Product is warranted against defects in materials and workmanship under normal use and service (a) for a period of one (1) year from the date of original purchase when delivered to you in new condition in its original container or (b) for 90 days from the date of original purchase for refurbished Products. Defective parts or a defective Product returned to a Canon USA repair facility or a Canon USA Authorized Service Facility (“ASF”), and proven to be defective upon inspection, will be repaired, exchanged for new or comparable rebuilt parts, or exchanged for a refurbished Product, as determined by the Canon USA repair Facility or the ASF. Warranty repair or replacement shall not extend the original warranty period of the Product. This warranty does not cover any accessories, or any consumables, such as paper or ink cartridges, as to which there shall be no warranty or replacement. This limited warranty shall only apply if the Product is used in conjunction with compatible computer equipment and software. Canon shall have no responsibility for such items except for compatible Canon brand peripheral equipment covered by a separate warranty (“Separate Warranty”). Repairs of such Canon brand peripheral equipment shall be governed by the terms of the Separate Warranty. Non-Canon brand equipment and software that may be distributed with the Product are sold “as is” and without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non-Canon brand items is given by the manufacturer or producer thereof. This limited warranty covers all defects encountered in normal use of the Product and does not apply in the following cases: (a) Loss of or damage to the Product due to abuse, neglect, mishandling, improper packaging by you, alteration, accident, electrical current fluctuations, improper use, failure to follow operating or maintenance instructions, or environmental conditions prescribed in Canon USA’s user’s manual or other documentation, or services performed by someone other than a Canon USA repair facility or its ASF. Without limiting the foregoing, dropping the Product, scratches, and abrasions will be presumed to have resulted from misuse, abuse or failure to operate the Product as set forth in the operating instructions. (b) Use of parts or supplies (other than those sold by Canon USA) that cause damage to the Product or cause abnormally frequent service calls or service problems. (c) If the Product has had it serial number or dating defaced, altered or removed. ANY SYSTEM SOFTWARE (WHETHER FACTORY LOADED ON THE PRODUCT OR CONTAINED ON THE SOFTWARE DISKETTES OR CDROM'S ENCLOSED WITH, OR ACCOMPANYING, THE PRODUCT), AND ANY UTILITY SOFTWARE, DISTRIBUTED WITH OR FOR THE PRODUCT, IS SOLD "AS IS" AND WITHOUT WARRANTY BY CANON. THE SOLE WARRANTY WITH RESPECT TO SUCH SOFTWARE IS CONTAINED IN THE SOFTWARE MANUFACTURER'S LICENSE AGREEMENT DISTRIBUTED THEREWITH, INCLUDING ANY LIMITATIONS AND DISCLAIMERS THEREON. PLEASE CONTACT CANON IMMEDIATELY IF YOU HAVE NOT RECEIVED A COPY OF THE SOFTWARE MANUFACTURER'S LICENSE AGREEMENT. NO IMPLIED WARRANTY, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.) CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, INCONVENIENCE, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THE PRODUCT REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA OR ITS ASF HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA OR ITS ASF BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE THE PRODUCT SOLD BY CANON USA NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON USA, OR ITS ASF. (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.) THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE PRODUCT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY. 59 Appendix Canon offers a full range of customer technical support* options: • • • • • For interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.com) Automated interactive telephone support on most current products 24 hours, 7 days a week (1-800-423-2366) 24-hour, Fax-On-Demand System for product specifications and technical information (1-800-526-4345) Free live technical support Monday—Saturday (excluding holidays) for products still under warranty (1-757-413-2848) The location of the ASF nearest you (1-800-423-2366, select "automated support options") If the problem cannot be corrected by using one of the above technical support options, repair options are available at the time of your call to the Free live technical support number above or via the website at www.canontechsupport.com This limited warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. * Support program specifics are subject to change without notice. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 USA Canon is a registered trademark of Canon Inc. 60 Index Index A Adjusting Paper Thickness Lever .................................. 4 Adjusting Print Quality ................................................15 Advanced Printing .......................................................11 Aligning the Print Head ...............................................35 An Error Message Appears on the Screen .....................48 B Balloon Help ................................................................ 2 BCI-24 Black ...............................................................38 BCI-24 Color ................................................................38 BJ Print Monitor ...........................................................45 BJ Printer Driver Systems Requirements .......................55 BJ Status Monitor ..................................................42, 45 Borderless (full) ....................................................25, 27 Borderless Printing ............................. 22, 23, 24, 26, 44 Bubble Jet Direct .........................................................11 C Camera Direct Print .....................................................55 Camera Error Message .................................................50 Cancelling Print Jobs .................................................... 8 Cannot Print Properly from the Digital Camera .............50 CANON LIMITED WARRANTY - (USA Only) ......................59 Chooser ......................................................................48 Cleaning ...............................................................31, 32 D Deep Cleaning .......................................................33, 34 Digital camera .............................................................11 Digital video camcorder ...............................................11 Driver saving setting ......................................................20 settings ...........................................................8, 10 uninstalling .........................................................48 Help button .................................................................. 2 High Resolution Paper .................................................. 6 I ImageBrowser ............................................................ 23 Ink Counter Reset ....................................................... 40 Ink Tank ..................................................................... 38 Installing the Printer Driver when using Mac OS 9.x ..... 52 L Load Limit Mark ............................................................ 4 Loading Paper .............................................................. 3 Low Ink Warning ......................................................... 41 Low Ink Warning Setting ............................................. 49 M Matte Photo Paper ........................................................ 6 Media speciality .............................................................. 5 to avoid ................................................................ 3 Media Type ........................................................... 6, 8, 9 Media Types for Digital Camera ................................... 11 Media Types Suitable for Borderless Printing ........ 24, 26 N Nozzle Check ........................................................ 29, 30 Nozzle Check Pattern examining ........................................................... 30 printing .............................................................. 29 O Opening the Printer Properties Dialog Box Directly from the Start Menu ............................................................. 14 Opening the Printer Properties Dialog Box from Your Application Program ............................................... 14 E P Easy-PhotoPrint .............................................. 23, 24, 26 Easy-WebPrint ............................................................23 Examining the Nozzle Check Pattern ............................30 Exif 2.2 .......................................................................23 Exif Print .....................................................................23 Page Setup ............................................................. 9, 45 Page Setup dialog box ................................................ 45 Paper feed roller ......................................................... 46 Paper Jams ................................................................. 46 Paper Rest Load Limit ................................................... 6 Paper Size .................................................................... 9 Paper thickness lever .................................................... 4 Paper Thickness Lever Position ..................................... 6 Photo Noise Reduction ................................................ 19 Photo Optimizer PRO .................................................. 17 Photo Paper Plus Glossy ............................................... 6 Photo Paper Pro ............................................................ 6 G Glossy Photo Paper ...................................................... 6 H Handling Error Messages .............................................47 61 Index Photo Paper Pro Perforated ........................................... 6 PhotoRecord .............................................................. 23 PhotoStitch ................................................................ 23 POWER button .............................................................. 2 POWER lamp ................................................................ 2 POWER/ERROR lamp .................................................. 47 Print dialog box ...................................................7, 9, 44 Print Head Alignment ............................................35, 37 Print Head Cleaning .................................................... 31 Print Head Deep Cleaning ........................................... 33 print head holder ....................................................... 38 Print Media to Avoid ..................................................... 3 Print Mode ................................................................. 10 Print Quality ................................................ 8, 10, 15, 44 Printer Driver Setting for Media Type ............................. 6 Printer Properties dialog box ....................... 7, 14, 29, 44 Printer Utility dialog box ............................................. 30 Printing Borderless Photographs ...........................24, 26 Printing from a Digital Camera .................................... 12 Printing Photographs Directly from a Digital Camera ... 11 Printing the Nozzle Check Pattern ............................... 29 R Recalling Driver Settings ............................................ 20 Regulatory Information ............................................... 58 Replacing an Ink Tank ............................................28, 38 Resetting the Ink Counter ........................................... 40 RESUME/CANCEL button ..........................................8, 10 S Safety Precautions ..................................................... 56 Saving Driver Setting .................................................. 20 Speciality Media .......................................................... 6 Specifications ............................................................ 54 T Technical support ....................................................... 60 Transparencies ............................................................. 6 Troubleshooting ......................................................... 42 T-Shirt Transfers ........................................................... 6 Turning on the Printer ................................................... 2 U Uninstalling the printer driver ..................................... 48 Using Speciality Media ................................................. 5 V Vivid Photo ................................................................ 18 W Warranty .................................................................... 59 When Printing Becomes Faint or Colors are Incorrect ... 28 62 Z ZoomBrowser EX .........................................................23
advertisement
Related manuals
Download
PDF
advertisement
Table of contents
- 4 Turning on the Printer
- 5 Loading Paper
- 7 Using Speciality Media
- 9 Printing with Windows
- 11 Printing with Macintosh
- 13 Printing Photographs Directly from a Digital Camera
- 16 Accessing Printer Driver
- 17 Adjusting Print Quality for Photographs
- 24 Using Printer Driver Options
- 25 Using the Bundle Software
- 26 Printing Borderless Photographs with Windows
- 28 Printing Borderless Photographs with Macintosh
- 30 When Printing Becomes Faint or Colors are Incorrect
- 31 Printing the Nozzle Check Pattern
- 33 Print Head Cleaning
- 35 Print Head Deep Cleaning
- 37 Aligning the Print Head
- 40 Replacing an Ink Tank
- 45 Cannot Install the Printer Driver
- 46 Print Quality is Poor or Contains Errors
- 47 Troubleshooting Printer Hardware
- 48 Paper Does Not Feed Properly
- 49 Handling Error Messages
- 50 An Error Message Appears on the Screen
- 52 Cannot Print Properly from the Digital Camera
- 54 Installing the Printer Driver when using Mac OS 9.x
- 55 User’s Guide Table of Contents
- 56 Specifications
- 58 Safety Precautions
- 60 Regulatory Information
- 61 CANON LIMITED WARRANTY --- (USA Only)