3 Map Screen
The most commonly used screen is the Map screen. Whether you are following a route or just traveling around a city, the chances are that the Map screen will be displayed. The Map screen can be displayed in two unique modes: normal and routing.
Normal Mode Map Screen
In normal mode, your position is shown on the map along with the time. As you travel, your position will be updated, giving you a clear view of your position and surrounding streets.
G
A
B
C
Routing Mode Map Screen
In routing mode additional information is displayed providing detailed information about the route you have selected.
I
H
D
E
G
F
A
B D
C
(A) Current location.
(B) Information display. Displays your choice of speed, time of day, elevation, compass direction. Tap on the information field to change.
(C) Zoom Out/In.
(D) Access Main Menu.
(E) Access Highway POIs (Displayed only while on an Interstate, freeway, and some) state highways.)
(F) Access volume controls.
(G) Access OneTouch Menu. OneTouch Menu gives you instant access to your saved search criteria and favorite destinations.
F
E
(A) Turn instructions for next maneuver. Tap icon to display the maneuver list (available only when routing). Distance and road name for the next maneuver. Tap to repeat last voice instruction.
(B) Following maneuver indicator.
(C) Speed limit.
(D) Information display. Displays speed, time of day, elevation, compass direction. While routing it also can also display distance to destination, estimated time of arrival
(ETA), and time remaining. Tap on the information field to change.
(E) Zoom in and zoom out controls to change the map scale.
(F) Access Main Menu.
(G) Access the list of nearest Highway Exit
POIs (available only when driving on a highway/freeway/interstate).
(H) Access volume, brightness controls.
(I) Access OneTouch Menu for instant access to your saved search criteria and favorite destinations.
RoadMate 6230-LM User Manual Page 7
Setting Map Options
The map display can be customized in Settings to your preferences.
1. From the Map screen, tap the MENU button.
2. Tap the Settings Icon.
3. Tap Map button.
4. Use the Map Options screen to customize what is shown on the map and how the map is displayed.
Night Mode
Night Mode determines when (or if) the display switches from daytime mode to night mode. The button displays the active setting - tap to see the options and select the one you like. There may be a brief delay before the selected mode becomes active.
Map Mode (2D or 3D)
Sets how the map is normally displayed:
3D - Perspective view
2D - Top down view, Heading Up
2D
N
- Top down view, North Up
Tap the button to switch between modes. The selected mode is shown on the button.
POI Visibility
You can set which POIs are displayed on the map as you drive. Set checkmarks for each item you want displayed.
Auto Zoom on Turns
Check to enable, uncheck to disable.
Highway Lane Assist
Check to enable, uncheck to disable.
Selecting Map Mode and Default Zoom
Level
When driving, the map displays at a zoom level you set here.
1. From the Map screen, tap anywhere on the map. A button appears in the lower left corner; it displays the mode it will select when tapped.
2. Tap the button to switch between 2D and 3D. The 2D mode (North Up or
Heading Up) is from the settings screen as described above.
3. Tap the ‘+’ or ‘-’ zoom level buttons at the bottom of the Map screen to zoom to your preferred level,
4. Tap .
Note that zoom levels are limited in 3D mode.
As you zoom out in 3D, the display will switch to 2D at higher zoom levels.
For additional details on Settings, see “Settings” on page 27
RoadMate 6230-LM User Manual Page 8
