Sound. Grandstream Networks GXV3275, GXV3240

2. Tap on "Set up Wi-Fi hotspot" to configure network SSID, security type and password. Please make sure the password has at least 8 characters. Otherwise, users won't be able to save the setting.

3. On the other device that needs Wi-Fi access, turn on Wi-Fi, look for the SSID of the GXV3275 hotspot and enter authentication information to get connected.

Figure 8: GXV3275 Wi-Fi Hotspot

Sound

Use the Sound settings to configure phone's sound mode, volume, ring tone and notification tone.

 Silent mode. Tap on it to turn on/off the sound from speaker when there is incoming call.

 HDMI. Tap on it to switch the audio output between the HDMI and local channels when HDMI device connected. If it is on, the audio will be output via the remote HDMI device. Or it will output from local speaker, headset or other non-HDMI audio channels.

 Line order. Tap on it to select 3.5mm earphone line order "CTIA" or "OMTP". Audio loopback test for the selected option is available if the 3.5mm earphone is plugged in.

 Volume. Tap on Volume and scroll left/right to adjust the volume for Ringtone, Media and Alarm. When adjusting the volume, the tone will be played reflecting the volume change.

 Ringtone. Select phone's ringtone for incoming call.

 Notification tone. Select notification ringtone.

Display

 Brightness. Tap on Brightness and scroll left/right to adjust the LCD brightness.

 Screen timeout. Tap to open the dialog to set the screen timeout interval.

 Screensaver timeout. Tap to open the dialog to set the screensaver timeout interval.

 Daydream. Tap to select the screensaver on the phone.

- Screensaver. After selecting "Screensaver", tap on to configure network image path, local

P a g e | 30

GXV3275 Administration Guide