IDRaman mini 2.0

Chapter 3

Operation with OceanView

IDRaman mini 2.0 Start-up with OceanView

Software

You have the option of using your IDRaman mini 2.0 with OceanView operating software to provide additional functionality over operating in standalone mode. OceanView is available from

Ocean Optics for an additional charge. This chapter describes how to use the IDRaman mini 2.0 with OceanView.

Start-up with Windows 7, 8 and 10

► Procedure

1. Turn on the computer.

2. Ensure that OceanView software is installed.

3. Be sure that power is supplied to the device. Turn on the IDRaman mini 2.0.

4. Connect the IDRaman mini 2.0 to the computer via a mini USB cable. Wait for the driver to automatically install (this may take several minutes). If the drivers don’t automatically install, see the Why can’t my computer locate the drivers FAQ on the Ocean Optics website.

000-40000-011-02-201601 23