The hardware at a glance. Terratec Cinergy S USB Manual Hardware

Cinergy S USB

• tvtv premium account

• Quick Setup Guide

The hardware at a glance

The hardware and connections of the Cinergy S USB.

2

1

4

3

1. Antenna input

2. Power input (DC In)

3. IR receiver and status LED

4. USB 2.0 connector

Antenna input

Connect your digital SAT cable to the antenna input of the Cinergy S USB. Please note that the cable cannot be looped through the receiver or other devices, but must be connected directly from the LMB or switch of your residential system to the Cinergy S USB.

ENGLISH 7