10. SPECIAL KEYPAD FUNCTION KEYS. Guardall Pi-8
Add to My manuals20 Pages
Guardall Pi-8 is a powerful and versatile home security system that offers a wide range of features to protect your home and family. With its intuitive keypad and easy-to-use interface, the Pi-8 is simple to set up and operate.
The Pi-8 features multiple arming modes, including full set and part set, so you can customize the system to meet your specific needs. The system also includes a variety of programmable functions, such as chime mode and delayed alarm circuits, so you can tailor the system to your lifestyle.
In the event of an alarm, the Pi-8 will sound a loud siren and send a signal to your monitoring company. The system also includes a built-in speaker that can be used to communicate with the monitoring company or to listen for activity inside your home.
advertisement
![10. SPECIAL KEYPAD FUNCTION KEYS. Guardall Pi-8 | Manualzz 10. SPECIAL KEYPAD FUNCTION KEYS. Guardall Pi-8 | Manualzz](http://s1.manualzz.com/store/data/011812248_1-31babf5930d7078f3ea9721aa3ec11b6-360x466.png)
10. SPECIAL KEYPAD FUNCTION KEYS
There are four keys at the bottom of your keypad. The function of these keys is explained below.
10.1 PANIC ALARM (P)
Holding down the P key on the keypad for 1 second activates a PANIC ALARM (if programmed).
If you have additional FIXED PANIC buttons or REMOTE PANIC buttons, pressing either of these will also activate a PANIC ALARM.
In all of the above situations a special PANIC REPORTING CODE can be sent to the monitoring company.
This is a high priority condition so DO NOT use this feature unnecessarily.
If the audible panic option has been programmed, then the sounder, strobe and internal speaker (if fitted) will activate.
10.2 FIRE ALARM (F)
Holding down the F key on the keypad for 1 second activates a FIRE ALARM (if programmed).
The sounder, strobe and internal speaker (if fitted) will activate. Fire alarms are always audible.
The alarm auxiliary output will be triggered.
10.3 MEDICAL ALARM (M)
Holding down the M key on the keypad for 1 second activates a MEDICAL ALARM (if programmed).
The sounder, strobe and internal speaker (if fitted) will activate. Medical alarms are always audible.
The alarm auxiliary output will be triggered.
10.4 MODE KEY
Your panel may have been programmed to require the MODE key to be pressed at the same time as any of the above.
9
advertisement
Related manuals
advertisement
Table of contents
- 5 1. THE KEYPAD AND ITS OPERATION
- 5 1.1 DESCRIPTION OF THE KEYPAD LEDS
- 5 1.1.1 READY LED (RED)
- 5 1.1.2 TAMPER LED (RED)
- 5 1.1.3 POWER LED (GREEN)
- 5 1.1.4 CIRCUIT LEDs (YELLOW)
- 5 1.2 THE KEYPAD BUZZER
- 6 1.3 KEYPAD REMOTE LED FUNCTIONS
- 6 1.4 THE PANEL’S INTERNAL SPEAKER (If fitted)
- 6 2. HOW TO SET THE PANEL
- 6 2.1 FULL SET
- 7 2.2 PART SET (SETTING WHILE AT HOME)
- 7 2.3 QUICK PART SET
- 7 2.4 PART SET (WITH ENTRY/EXIT POINT)
- 8 3. PROBLEMS WHEN SETTING THE PANEL
- 8 3.1 THE PANEL WILL NOT SET WHEN YOU ENTER YOUR CODE!
- 8 3.1.1 IS THE CODE CORRECT?
- 8 3.1.2 IS THE READY LED ON?
- 8 3.1.3 HAS THE ENGINEER’S RESET CODE BEEN ENABLED?
- 8 3.1.4 DOES THE SOUNDER ACTIVATE BEFORE YOU EXIT?
- 8 3.1.5 IS THE TAMPER LED ON?
- 9 4. HOW TO UNSET THE PANEL
- 9 5. PROBLEMS WHEN UNSETTING THE PANEL
- 9 5.1 THE SOUNDER ACTIVATES IMMEDIATELY UPON ENTRY
- 9 5.3 THE PANEL WILL NOT UNSET
- 9 6. SETTING AND UNSETTING USING A KEYSWITCH
- 10 7. HOW TO BYPASS A CIRCUIT
- 10 8. HOW TO UN-BYPASS A CIRCUIT
- 10 9. HOW TO SILENCE THE SOUNDER
- 11 10. SPECIAL KEYPAD FUNCTION KEYS
- 11 10.1 PANIC ALARM (P)
- 11 10.2 FIRE ALARM (F)
- 11 10.3 MEDICAL ALARM (M)
- 11 10.4 MODE KEY
- 12 11. USER PROGRAMMABLE FUNCTIONS
- 12 11.1 CHIME MODE
- 12 11.1.1 HOW TO PROGRAM THE CHIME MODE
- 12 11.2 PROGRAMMING THE PART SET (AT HOME) MODE
- 12 11.2.1 PART SET CIRCUITS
- 13 11.2.2 HOW TO PROGRAM “PART SET” (AT HOME) CIRCUITS
- 13 11.2.3 HOW TO CANCEL A "PART SET” CIRCUIT
- 14 11.3 DELAYED ALARM CIRCUITS
- 14 11.3.1 HOW TO PROGRAM “DELAYED ALARM” CIRCUITS
- 14 11.3.2 HOW TO CANCEL A “DELAYED ALARM” CIRCUIT
- 15 11.4 ADDING OR CHANGING USER CODES
- 15 11.4.1 ENTERING NEW AND CHANGING OLD CODES
- 16 11.4.2 USER CODE TABLE
- 16 11.4.3 THE DURESS CODE (USER CODE 16)
- 17 12. EVENT LOG
- 18 13. TROUBLE CONDITIONS
- 18 14. TEST MODE