Camera Settings. Pentax Optio Optio V10, V10, Optio V-10
Advertisement
Advertisement
Settings
Camera Settings
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
8
Formatting an SD Memory Card or the Built-in
Memory
Formatting will delete all the data on the SD Memory Card.
All the data in the built-in memory will be deleted if no SD Memory Card is inserted in the camera.
• Do not remove the SD Memory Card during formatting as this may damage the card and render it unusable.
• Formatting will delete protected images and any data recorded on the card with any other camera or digital device.
• SD Memory Cards formatted on a PC or device other than the camera cannot be used. Be sure to format the card with the camera.
1
Use the four-way controller (23) to select [Format] on
the [u Setting] menu.
2
Press the four-way controller (5).
The Format screen appears.
3
Use the four-way controller (23) to select [Format].
4
Press the 4 button.
F o r m a t
A l l d a t a d e l e t e d
Formatting starts. When formatting is completed, the camera returns to Capture mode or Playback mode.
F o r m a t
C a n c e l
OK
148
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Changing the Sound Settings
You can adjust the volume of operation sounds and change the type of sound.
1
Use the four-way controller (23) to select [Sound] on
the [u Setting] menu.
2
Press the four-way controller (5).
The Sound screen appears.
S o u n d
Vo l u m e
S t a r t - u p S o u n d
S h u t t e r S o u n d
O p e r a t i o n S o u n d
S e l f - t i m e r S o u n d
1
1
1
MENU
Changing the Operation Volume
3
Use the four-way controller (23) to select [Volume].
4
Use the four-way controller (45) to adjust the volume.
The selected volume is saved (the default setting is 3).
Set the volume to 0 to mute the start-up sound, shutter sound, operation sound, and self-timer sound.
8
Changing the Sound Type
5
Use the four-way controller (23) to select [Start-up
Sound].
6
Press the four-way controller (5).
A pull-down menu appears.
149
8
150
7
Use the four-way controller (23) to select [1] (default
setting), [2], [3] or [Off] and press 4 button.
The selected sound type is saved.
8
Set [Shutter Sound] and [Operation Sound] in the same way as in Steps 5 to 7.
Use the four-way controller (45) to select O (On) or P (Off) for the self-timer sound.
9
Press the 3 button.
The screen returns to the [B Setting] menu with the changed setting.
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Changing the Date and Time
You can change the initial date and time settings. You can also set the style in which the date appears on the camera.
1
Use the four-way controller (23) to select [Date
Adjust] on the [u Setting] menu.
2
Press the four-way controller (5).
D a t e A d j u s t
The Date Adjust screen appears.
D a t e S t y l e mm dd yy 24h
D a t e
Ti m e
0 1 / 0 1 / 2 0 0 7
0 : 0 0
MENU C a n c e l
3
Press the four-way controller (5).
The frame moves to [mm/dd/yy].
Depending on the initial setting or previous setting, [dd/mm/yy] or [yy/mm/dd] may be displayed.
4
Use the four-way controller (23) to choose the date display style.
D a t e A d j u s t
D a t e S t y l e
D a t e
Ti m e
MENU C a n c e l
Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
5
Press the four-way controller (5).
D a t e A d j u s t
The frame moves to [24h].
6
Use the four-way controller (23)
D a t e S t y l e
D a t e to select [24h] (24-hour display) or
[12h] (12-hour display).
Ti m e
MENU C a n c e l
OK O K mm dd yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK O K mm dd yy 24h
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK O K
8
151
8
7
Press the four-way controller (5).
The frame returns to [Date Style].
8
Press the four-way controller (3).
The frame moves to [Date].
D a t e A d j u s t
D a t e S t y l e mm dd yy 24h
D a t e
Ti m e
MENU C a n c e l
0 1 / 0 1 / 2 0 0 7
0 : 0 0
OK O K
9
Press the four-way controller (5).
D a t e A d j u s t
The frame moves to one of the following items depending on the date style set in
Step 4.
D a t e S t y l e
D a t e mm dd yy 24h
0 1 / 0 1 / 2007
For [mm/dd/yy] month (Example: [01])
For [dd/mm/yy] day (Example: [01])
Ti m e 0 : 0 0
MENU C a n c e l OK O K
For [yy/mm/dd] year (Example: [2007])
The following operations and screens use [mm/dd/yy] as an example.
The operations are the same even if another date style has been selected.
10
Use the four-way controller (23) to change the month.
11
Press the four-way controller (5).
The frame moves to the day field. Use the four-way controller (23) to change the day. After changing the day, change the year in the same manner.
12
Change the time in the same way as in Steps 7 to 10.
If you selected [12h] in Step 6, the setting switches between am and pm corresponding to the time.
13
Press the 4 button.
The date and time settings are saved.
When you finish the settings and press the 4 button, the camera clock is reset to 00 seconds. To set the exact time, press the 4 button when the time signal (on the TV, radio, etc.) reaches 00 seconds.
152
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Setting the World Time
The date and time selected in “Setting the Date and Time” (p.37) and
“Changing the Date and Time” (p.151) serve as the W (Hometown) date
and time. By using the world time function, you can display the time in a city other than the Hometown (XDestination). This is useful when taking pictures in a different time zone.
Setting the Destination
1
Use the four-way controller (23) to select [World Time]
on the [u Setting] menu.
2
Press the four-way controller (5).
Wo r l d Ti m e
The World Time screen appears (the default setting is W (Hometown)).
3
Use the four-way controller (23)
to select X (Destination).
S e l e c t t i m e
D e s t i n a t i o n
N e w Yo r k
H o m e t o w n
N e w Yo r k
DST
1 4 : 2 5
DST
1 4 : 2 5
MENU
4
Press the four-way controller (5).
The Destination screen appears. The city that is currently selected blinks on the map.
5
Use the four-way controller (45) to change the Destination city.
C i t y
D e s t i n a t i o n
N e w Yo r k
1 4 : 2 5
The current time, location and time difference of the selected city appear.
D S T
MENU C a n c e l
Ti m e D i f .
+ 0:00
6
Use the four-way controller (23) to select [DST]
(Daylight Saving Time).
OK O K
7
Use the four-way controller (45) to select O (On) or P (Off).
Select O (On) if the Destination city uses daylight saving time.
8
153
8
Press the 4 button.
The World Time setting is saved.
9
Press the 3 button twice.
The camera returns to capture status with the current setting.
Select W (Hometown) in Step 3 on p.153 to set the city and DST
setting for the Hometown city.
8
Displaying the Time of the Destination on the LCD Monitor
(Select Time)
1
Use the four-way controller (23) to select [World Time]
on the [u Setting] menu.
2
Press the four-way controller (5).
Wo r l d Ti m e
The World Time screen appears.
3
Use the four-way controller (23) to select [Select time].
S e l e c t t i m e
D e s t i n a t i o n
L o n d o n
DST
2 0 : 2 5
DST H o m e t o w n
N e w Yo r k 1 4 : 2 5
MENU
4
Press the four-way controller (5).
A pull-down menu appears.
5
Use the four-way controller (23)
to select X (Destination) or W
(Hometown).
Wo r l d Ti m e
S e l e c t t i m e
D e s t i n a t i o n
L o n d o n
H o m e t o w n
N e w Yo r k
DST
2 0 : 2 5
DST
1 4 : 2 5
MENU
X : Displays the time in the city selected as the Destination city
W : Displays the time in the city selected as the Hometown city
6
Press the 4 button.
The Select time setting is saved.
7
Press the 3 button twice.
The camera returns to A mode or Q mode.
X (Destination) appears on the LCD monitor when the camera returns to A mode and
World Time is selected.
OK O K
154
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
You can choose from English, French, German, Spanish, Portuguese,
Italian, Dutch, Danish, Swedish, Finnish, Polish, Czech, Hungarian,
Turkish, Russian, Thai, Korean, Chinese (traditional and simplified) and
Japanese.
1
Use the four-way controller (23) to select [Language/
] on the [u Setting] menu.
2
Press the four-way controller (5).
The Language/ screen appears.
3
Use the four-way controller
(2345) to select the language.
4
Press the 4 button.
E n g l i s h
Deutsch
D a n s k
Svenska
F i n n i s h
P o l i s h
I t a l i a n o
Nederlands
MENU C a n c e l
C z e c h
Hungarian
OK O K
The selected language is set to be displayed.
8
155
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
8
Changing the Image Folder Name
You can change the name of the folder where images are saved.
Folder Name
Date
(default setting)
XXX_mmdd (3-digit folder number_month day)
* xxx_ddmm (3-digit folder number_day month) when the date style is set to [dd/mm/yy].
Standard XXXPENTX (where XXX is the 3-digit folder number)
Picture taken with standard folder name
(Example: March 25)
Folder name changed to date setting
(Example: March 25)
Next time a picture is taken
(Example: April 1)
DCIM DCIM DCIM
100
100PENTX
100
100PENTX
101
101_0325
100
100PENTX
101
101_0325
102
102_0401
1
Use the four-way controller (23) to select [Folder
Name] on the [u Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select [Standard] or [Date].
4
Press the 4 button.
The Folder Name setting is saved.
156
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Changing the USB Connection Mode
Choose the appropriate USB connection mode depending on whether you are going to connect the USB cable to a PC or a PictBridgecompatible printer.
Refer to the PC Connection Manual for instructions on connecting the camera to a computer.
1
Use the four-way controller (23) to select [USB
Connection] on the [u Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select [PC] or [PictBridge].
S e t t i n g
[PC] (default setting) : Select this option when transferring image data
[PictBridge] to a computer
: Select this option when connecting the camera
U S B C o n n e c t i o n
Vi d e o O u t
B r i g h t n e s s L e v e l
P o w e r S a v i n g
MENU C a n c e l to a PictBridge-compatible printer
4
Press the 4 button.
The USB Connection setting is saved.
F o l d e r N a m e
5 s e c
2 / 3
D a t e
P C
PictBridge
OK O K
Do not connect the camera to your PC while [PictBridge] is selected for the USB Connection mode. And do not connect the camera to your printer while [PC] is selected.
8
157
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
8
Changing the Video Output Format
When you connect the camera to AV equipment, choose the appropriate video output format (NTSC or PAL) for taking and playing back images.
1
Use the four-way controller (23) to select [Video Out]
on the [u Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select [NTSC] or [PAL].
S e t t i n g
F o l d e r N a m e D a t e
2 / 3
Choose the video output format to match the video input format of the AV equipment.
4
Press the 4 button.
U S B C o n n e c t i o n
Vi d e o O u t
B r i g h t n e s s L e v e l
P o w e r S a v i n g
P C
N T S C
PA L
5 s e c
MENU C a n c e l OK O K The Video Out setting is saved.
Depending on the country or region, images and sound files may fail to be played back if the video output format is set different from the one in use there. If this happens, change the video output format setting.
Connecting the Camera to AV Equipment 1p.117
List of World Time Cities 1p.165
158
How to display the [u Setting] menu
MENU
Four-way controller
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
3 button
Adjusting the Brightness of the LCD Monitor
You can adjust the brightness of the LCD monitor.
1
Use the four-way controller (23) to select [Brightness
Level] on the [u Setting] menu.
2
Use the four-way controller (45) to adjust the brightness.
S e t t i n g
F o l d e r N a m e D a t e
2 / 3
The following setting is saved.
F (Dark)
G (Normal) (default setting)
H (Bright)
3
Press the 3 button.
U S B C o n n e c t i o n
Vi d e o O u t
B r i g h t n e s s L e v e l
P o w e r S a v i n g
MENU E x i t
P C
N T S C
5 s e c
The camera returns to Capture mode or Playback mode.
The LCD monitor is displayed with the set brightness. To change the brightness setting, perform the above steps again.
8
159
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
8
Using the Power Saving Function
You can save battery power by setting the LCD monitor to dim automatically when no operation is performed for a fixed time. After the power saving function has been activated, the LCD monitor returns to the ordinary brightness by pressing any of the buttons.
1
Use the four-way controller (23) to select [Power
Saving] on the [u Setting] menu.
2
Press the four-way controller (5).
S e t t i n g
A pull-down menu appears.
3
Use the four-way controller (23) to select [2min], [1min], [30sec],
[15sec], [5sec] (default setting) or
[Off].
4
Press the 4 button.
F o l d e r N a m e
U S B C o n n e c t i o n
Vi d e o O u t
B r i g h t n e s s L e v e l
P o w e r S a v i n g
MENU C a n c e l
2 m i n
1 m i n
3 0 s e c
N T S C
1 5 s e c
5 s e c
O f f
OK
2 / 3
O K
The Power Saving setting is saved.
Power Saving does not function in the following situations:
• in Playback mode
• while the camera is connected to a PC or printer
• when using the AC adapter
• while recording a movie
• while the menu is being displayed
160
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is performed for a fixed time.
1
Use the four-way controller (23) to select [Auto Power
Off] on the [u Setting] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select [5min], [3min] (default setting) or [Off].
4
Press the 4 button.
S e t t i n g
A u t o P o w e r O f f
Q u i c k Z o o m
G r e e n B u t t o n
G u i d e D i s p l a y
5 m i n
3 m i n
O f f
3 / 3
The Auto Power Off setting is saved.
R e s e t
MENU C a n c e l OK O K
Auto Power Off does not function in the following situations:
• during a slideshow and movie or sound playback
• while the camera is connected to a PC or printer
8
161
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
8
Setting the Guide Display
You can set to display or hide guides when the mode is selected in
Capture Mode Palette (p.52) and Playback Mode Palette (p.57).
1
Use the four-way controller (23) to select [Guide
Display] on the [u Setting] menu.
2
Use the four-way controller (45)
S e t t i n g
to select O (On) or P (Off).
A u t o P o w e r O f f 3 m i n
3 / 3
The following setting is saved.
O (On) : Display
P (Off) (default setting) : Hide
3
Press the 3 button.
Q u i c k Z o o m
G r e e n B u t t o n
G u i d e D i s p l a y
R e s e t
MENU E x i t
The camera returns to Capture mode or
Playback mode.
To change the setting, perform the above steps again.
162
How to display the [u Setting] menu
MENU
Four-way controller
4 button
3 button
S e t t i n g
F o r m a t
S o u n d
D a t e A d j u s t
Wo r l d Ti m e
Language/
1 / 3
1 0 / 1 0 / 2 0 0 7
E n g l i s h
MENU E x i t
Resetting to Default Settings (Reset)
You can reset the camera settings to their defaults. Refer to “Default
Settings” (p.167) for the reset settings.
1
Use the four-way controller (23) to select [Reset] on
the [u Setting] menu.
2
Press the four-way controller (5).
The Reset screen appears.
3
Use the four-way controller (23) to select [Reset].
4
Press the 4 button.
The settings return to the defaults.
R e s e t
R e s e t t o i n i t i a l s e t t i n g ?
R e s e t
C a n c e l
OK O K
The following settings are not affected by resetting:
Date Adjust, Language/ and Video Out.
8
163
How to display the Playback Mode Palette
1
2, 3, 5
4, 6
MENU OK
8
Changing the Start-up Screen
You can choose an image to be displayed as the start-up screen when the camera is turned on.
1
Press the Q button.
The camera enters Q mode.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller (2345) to select ^
(Start-up Screen).
4
Press the 4 button.
The image selection screen appears.
5
Use the four-way controller (45) to choose an image for the startup screen.
6
Press the 4 button.
The Start-up Screen setting is saved.
MENU OK
• Once the start-up screen has been set, it will not be deleted even if the original image is deleted or the SD Memory Card or built-in memory is formatted.
• Select [Off] to hide the start-up screen.
164
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement