advertisement
NS-CLLT01_14-0316_MAN_V4_ENG.fm Page 14 Wednesday, May 28, 2014 6:40 AM
Insignia NS-CLLT01 Digital FM Clock Radio with Dock for iPhone5
Clean your clock radio
• Use a soft, dry, clean cloth to clean the exterior of your clock radio.
• Do not let liquid drip into the inside of your clock radio.
• For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry your clock radio immediately afterwards with a clean cloth. Do not use abrasive clothes, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.
Troubleshooting
Problem
No power
Cannot play an iPhone
®
Cannot charge an iPhone
®
No sound from the speakers
Static or noise when playing the radio
The sound is distorted
The clock radio gets warm after extended play at high volume levels
Cause/Solution
• Make sure the AC power adapter is connected securely and correctly to your clock radio and the power outlet.
• Make sure that the power outlet is working.
• Make sure that the iPhone ® is firmly connected to the lightning connector on your clock radio.
• Make sure that the iPhone
®
is working. Test it before trying to connect it to the clock radio.
• Make sure that the firmware in your iPhone
®
is current. For more information, go to www.apple.com.
• Try turning up the volume. If either the clock radio or the iPhone is set to minimum volume, you may not be able to hear your music.
• Make sure that the iPhone
®
is firmly connected to the lightning connector on your clock radio.
• Make sure the AC power adapter is connected securely and correctly to your clock radio and the power outlet.
• Use the VOLUME +/- button to increase the volume.
• If you are using and external sound source, turn up the volume on the playback device.
• Make sure that the correct sound source has been selected.
• Make sure that the AC power adapter is connected securely and correctly to your clock radio and the power outlet.
• Make sure that your clock radio is turned ON.
• Make sure that the station is tuned correctly and that the station has a good signal.
• Try another station.
• Extend the antenna wire to improve the reception.
• Make sure that the volume level is not set too high.
• If you are using an external sound source, make sure that the material on the sound source is not distorted. Try a different external sound source.
• Make sure that the station is tuned correctly and that the station has a good signal.
• Turn down the volume.
14 www.insigniaproducts.com
advertisement