Specifications. Bush Hog Pulverizer

MODEL NO.

SPECIFICATIONS

SIZE

PVB/PVS 600/602 60”

PVB/PVS 660/662 66”

PVB/PVS 720/722 72”

PVB/PVS 840/842 84”

APP. WT.

APP. WT.

(Single Roller) (Double Roller)

530 lbs.

560 lbs.

590 lbs.

650 lbs.

640 lbs.

680 lbs.

720 lbs.

790 lbs.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Figure 1 Top Link Lift Point

Spring Tensioner

PVS-7

22

Mast

Lower Lift Point

Frame

Double Rollers

Spike Shank

SECTION I

OPERATION

WARNING

DURING IMPLEMENT ADJUSTMENT

KEEP BODY, HANDS AND FEET CLEAR OF

TEETH AND ROLLERS.

Back the tractor until the ends of the lift arms can be attached to the lift points on the implement. Secure the lift arms to the mast. (Figure 1)

Attach the center link to the top of the mast and adjust so that the implement frame will be level in the operating position.

ATTACHMENT

The pulverizer should be placed on level ground.

DETACHING FROM TRACTOR

Place the tractor rockshaft control in “position control” (non-floating) for attaching and detaching the rear mounted pulverizer. “Draft control” or “position control” can be used while operating.

Lower the implement to the ground with rockshaft control in position control. Remove top link from mast, disconnect hitch arms from bottom pins and pull tractor away from implement.

6