advertisement
152
Linking driving position memory with door unlock operation
(driver’s side only)
A desired driving position can be recalled linked with the unlocking of the door.
■ Setting procedure
Record your driving position to button “1”, “2” or “3” before performing the following:
Carrying only the key to which you want to link the driving position, shift the shift lever to P and then close the driver’s door.
If 2 or more keys are in the vehicle, the driving position cannot be linked properly.
1
2
Turn the power switch to ON mode and recall the position which you want to link.
While pressing the button to recall the position, press the driver’s door lock switch
(either lock or unlock) until the signal beeps.
The driving position is recalled when the driver’s door is unlocked using the entry function or wireless remote control and the driver’s door is opened.
GS450h_U (OM30D01U)
153
■ Cancelation procedure
Carry only the key for which you want to cancel the linked door unlock operation.
If 2 or more keys are in the vehicle, the driving position cannot be canceled properly.
1
2
Turn the power switch to ON mode.
While pressing the “SET” button, press the driver’s door lock switch
(either lock or unlock) until the signal beeps.
Power easy access system
The auto away/return function enables easy access by activating when the driver or front passenger attempts to enter or exit the vehicle.
3
■ Auto away function when exiting the vehicle (driver’s/front passenger’s seat)
Driver’s seat
When all of the following actions have been performed, the steering wheel will move up and back to the point farthest away from the driver and the seat will move backward:
• The shift lever has been shifted to P.
• The power switch has been turned off.
• The driver seat belt has been unfastened.
Front passenger’s seat (if equipped)
If the lumbar support, side support (if equipped), etc. of the front passenger’s seat has been adjusted, the seat will return to its original state if the front passenger’s door is opened while the vehicle is stopped to allow easy exit from the vehicle.
GS450h_U (OM30D01U)
154
■ Auto return function when entering the vehicle (driver’s seat only)
When either of the following actions has been performed, the steering wheel will move toward the driver and seat will move forward:
• The power switch has been turned to ACCESSORY mode.
• The driver’s seat belt has been fastened.
■ When driving position memory is linked with door unlock operation
If the driver’s door is opened, the driver’s seat will move toward the memorized position but stop slightly beforehand to allow easy access to the vehicle.
Turning the power switch to ACCESSORY or ON mode, or fastening the driver’s seat belt moves the seat fully into the memorized position.
■ Operating the driving position memory after turning the power switch off
Driver’s seat:
Memorized seat positions can be activated up to 180 seconds after the driver’s door is opened and another 60 seconds after it is closed again. Memorized steering wheel position can be activated by pressing the power switch.
Front passenger’s seat:
Memorized positions can be activated up to 180 seconds after the front passenger’s door is opened by pressing button “1”, “2” or “3”.
■ Correct seat position
When the seat is in the most forward or most backward position, and the seat is being moved in those directions, the system may not correctly recognize the current position and the memorized position will not be correctly recalled.
■ The auto away function for exiting the driver’s seat
If the seat is already close to the rearmost position, the auto away function may not operate when the driver exits the vehicle.
■ Customization
The distance that the driver’s seat moves backward during the auto away function can be changed. (Customizable features:
CAUTION
■ Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger or squeeze your body against the steering wheel.
GS450h_U (OM30D01U)
Head restraints
Head restraints are provided for all seats.
Front seats
2
1
Vertical adjustment
Up
Pull the head restraints up.
Down
Push the head restraint down while pressing the lock release button.
Lock release button
Angle adjustment (if equipped)
Side support adjustment
The position of the head restraint can be adjusted forward in 4 stages.
(if equipped)
If the head restraint is pulled forward from the foremost position, it will return to the rearmost position.
155
3
GS450h_U (OM30D01U)
156
1
2
Rear seats
Up
Pull the head restraints up.
Down
Push the head restraint down while pressing the lock release button.
Lock release button
■ Removing the head restraints
Pull the head restraint up while pressing the lock release button.
Lock release button
■ Installing the head restraints
Front seats
Align the head restraint with the installation holes and push it down to the lock position.
Press and hold the lock release button when lowering the head restraint.
Rear seats
Align the head restraint with the installation holes and push it down to the lowest lock position while pressing the lock release button.
Lock release button
Lock release button
GS450h_U (OM30D01U)
■ Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
157
■ Adjusting the rear seat head restraint
Always raise the head restraint one level from the stowed position when using.
CAUTION
■ Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury.
● Use the head restraints designed for each respective seat.
● Adjust the head restraints to the correct position at all times.
● After adjusting the head restraints, push down on them and make sure they are locked in position.
● Do not drive with the head restraints removed.
3
GS450h_U (OM30D01U)
advertisement
Related manuals
advertisement