advertisement
Playback
Selecting a component
TV INPUT
SLEEP DMPORT
TV ?/1
AV ?/1
?/1
VIDEO BD
SYSTEM STANDBY
DVD SAT
TV SA-CD/CD TUNER
V/v/B/b,
2CH A.F.D.
MOVIE MUSIC
1
4
2
5
7
>10/
-
CLEAR
DISPLAY
8
0/10
DVD/BD
MENU
3
D.SKIP
6
D.TUNING
9
MEMORY AMP MENU
ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
Input buttons
AMP
MENU
MUTING
MASTER
VOL +/–
RETURN/EXIT MENU/HOME
1
Press the input button to select a component.
You can also use INPUT SELECTOR on the receiver.
The selected input appears on the display.
Selected input
[Display]
DMPORT
VIDEO
[VIDEO]
BD
[BD]
DVD
[DVD]
[DMPORT]
Components that can be played back
DIGITAL MEDIA PORT adapter connected to the
DMPORT jack
VCR, etc., connected to the VIDEO jack
Blu-ray disc player, etc., connected to the BD jack
SAT
[SAT]
TV
[TV]
SA-CD/CD
[SA-CD/CD]
DVD player, etc., connected to the DVD jack
Satellite tuner, etc., connected to the SAT jack
TV, etc. connected to the
TV jack
Super Audio CD/CD player, etc., connected to the SA-CD/CD jack
TUNER
[FM or AM band]
Built-in radio tuner
2
Turn on the component and start playback.
3
Press MASTER VOL +/– to adjust the volume.
You can also use MASTER VOLUME on the receiver.
To activate the muting function
Press MUTING.
The muting function will be canceled when you do the following.
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
To avoid damaging your speakers
Before you turn off the receiver, be sure to turn down the volume level.
29 GB
Naming inputs
You can enter a name of up to 8 characters for inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with the names of the connected components.
1
Press the input button to select the input you want to create an index name for.
You can also use INPUT SELECTOR on the receiver.
2
Press AMP MENU.
“1-LEVEL” appears on the display.
3
Press
V/v repeatedly to select
“7-SYSTEM”.
4
Press menu.
5
Press
V/v to select “NAME IN”.
6
Press parameter.
The cursor flashes and you can select a character.
7
Press
V/v to select a character,
then press
B/b to move the
cursor to the next position.
If you made a mistake
Press B/b until the character you want to change flashes, then press V/v to select the correct character.
Tips
• You can select the character type as follows by pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
• To enter a blank space, press b without selecting a character.
8
Press .
The name you entered is registered.
30 GB
Listening/Watching a component
Listening to a Super Audio CD/CD
TV INPUT
SLEEP DMPORT
TV ?/1
AV ?/1
?/1
VIDEO BD
SYSTEM STANDBY
DVD SAT
TV SA-CD/CD TUNER
2CH
1
4
7
CLEAR
DISPLAY
A.F.D.
MOVIE
2
5
8
0/10
MUSIC
DVD/BD
MENU
3
D.SKIP
6
9
D.TUNING
MEMORY AMP MENU
ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
RETURN/EXIT
TV CH –
PRESET –
.
MENU/HOME
REPLAY ADVANCE
< <
TV CH +
PRESET +
>
TUNING – m H
TUNING +
M
TV
X
FM MODE x
2
3
5
Notes
• The operation is described for a
Sony Super Audio CD player.
• Refer to the operating instructions supplied with the
Super Audio CD player or CD player.
Tip
You can select the sound field to
suit the music. Refer to page 44
for details.
Recommended sound fields:
Classical: HALL
Jazz: JAZZ
Live concert: CONCERT
?/1
PHONES
INPUT SELECTOR
INPUT MODE
3
TUNING MODE TUNING
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE MUSIC
MASTER VOLUME
DISPLAY DIMMER MUTING
5
1
Turn on the Super Audio CD player/CD player, then place the disc on the tray.
2
Turn on the receiver.
3
Press SA-CD/CD.
You can also use INPUT SELECTOR on the receiver to select “SA-CD/CD”.
4
Play back the disc.
5
Adjust to a suitable volume.
6
After you have finished listening to the
Super Audio CD/CD, eject the disc and turn off the receiver and Super Audio CD player/
CD player.
31 GB
Watching a DVD/Blu-ray disc
TV INPUT
SLEEP DMPORT
TV ?/1
AV ?/1
?/1
VIDEO BD
SYSTEM STANDBY
DVD SAT
TV SA-CD/CD TUNER
2CH
1
4
7
CLEAR
DISPLAY
A.F.D.
MOVIE MUSIC
DVD/BD
MENU
2 3
D.SKIP
5 6
8
0/10
9
D.TUNING
MEMORY AMP MENU
ENTER
TOOLS/
OPTIONS MUTING
TV VOL
MASTER VOL
RETURN/EXIT
TV CH –
PRESET –
.
MENU/HOME
REPLAY ADVANCE
< <
TV CH +
PRESET +
>
TUNING – m H
TUNING +
M
TV
X
FM MODE x
2
3
6
Notes
• Refer to the operating instructions supplied with the
TV and DVD player or Blu-ray disc player.
• Check the following if you cannot listen to multi channel sound.
– Be sure this receiver is connected to the DVD player or Blu-ray disc player via a digital connection.
– Be sure the digital audio output of the DVD player or
Blu-ray disc player is set up properly.
Tips
• Select the sound format of the disc to be played, if necessary.
• You can select the sound field to suit the movie/music. Refer to
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
?/1
PHONES
INPUT SELECTOR
INPUT MODE
3
TUNING MODE TUNING
MEMORY/
ENTER
2CH/
A.DIRECT
A.F.D.
MOVIE MUSIC
MASTER VOLUME
DISPLAY DIMMER MUTING
6
1
Turn on the TV and DVD player or Blu-ray disc player.
2
Turn on the receiver.
3
Press DVD to watch a DVD or press BD to watch a Blu-ray disc.
You can also use INPUT SELECTOR on this receiver to select “DVD” or “BD”.
4
Switch the input of the TV so that an image of the DVD or Blu-ray disc is displayed.
5
Play back the disc.
6
Adjust to a suitable volume.
7
After you have finished watching the DVD or
Blu-ray disc, eject the disc and turn off the receiver, TV and DVD player or Blu-ray disc player.
32 GB
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 6 Description and location of parts
- 13 Getting Started
- 13 1: Installing the speakers
- 14 2: Connecting the speakers
- 15 3: Connecting the TV
- 16 4a: Connecting the audio components
- 17 4b: Connecting the video components
- 22 5: Connecting the antennas (aerials)
- 23 6: Preparing the receiver and the remote
- 24 7: Calibrating the appropriate settings automatically (AUTO CALIBRATION)
- 28 8: Adjusting the speaker levels and balance (TEST TONE)
- 29 Playback
- 29 Selecting a component
- 31 Listening/Watching a component
- 33 Amplifier Operations
- 33 Navigating through menus
- 36 Adjusting the level (LEVEL menu)
- 37 Adjusting the tone (TONE menu)
- 37 Settings for the surround sound (SUR menu)
- 38 Settings for the tuner (TUNER menu)
- 38 Settings for the audio (AUDIO menu)
- 39 Settings for the video (VIDEO menu)
- 40 Settings for the system (SYSTEM menu)
- 43 Calibrating the appropriate settings automatically (A. CAL menu)
- 44 Enjoying Surround Sound
- 44 Enjoying Dolby Digital and DTS Surround sound (AUTO FORMAT DIRECT)
- 46 Selecting a pre- programmed sound field
- 48 Using only the front speakers (2CH STEREO)
- 49 Listening to the sound without any adjustment (ANALOG DIRECT)
- 49 Resetting sound fields to the initial settings
- 50 Tuner Operations
- 50 Listening to FM/AM radio
- 52 Presetting radio stations
- 54 Using the Radio Data System (RDS)
- 56 Other Operations
- 56 Switching between digital and analog audio (INPUT MODE)
- 56 Enjoying the DIGITAL MEDIA PORT (DMPORT)
- 59 Changing the display
- 59 Using the Sleep Timer
- 60 Recording using the receiver
- 60 Using the Remote
- 60 Changing button assignments
- 61 Additional Information
- 61 Glossary
- 63 Precautions
- 64 Troubleshooting
- 68 Specifications
- 70 Index