advertisement
QuickSpecs
Technical Specifications
HP MSL2024/MSL4048/MSL8048/MSL8096 Tape
Libraries
Drive Technology
MSL2024
LTO-6 Ultrium 6250
LTO-5 Ultrium 3280
LTO-5 Ultrium 3000
LTO-4 Ultrium 1840
LTO-4 Ultrium 1760
LTO-3 Ultrium 920
Maximum Number of Drives 1 (Ultrium 3280, 1840)
2 (Ultrium 6250, 3000, 1760,
920)
Number of Slots 24
MSL4048
LTO-6 Ultrium 6250
LTO-5 Ultrium 3280
LTO-5 Ultrium 3000
LTO-4 Ultrium 1840
LTO-4 Ultrium 1760
LTO-3 Ultrium 920
2 (Ultrium 3280, 1840)
4 (Ultrium 6250, 3000, 1760,
920)
48
Drive Interface
Maximum
Capacity
Native
8 Gb Native Fibre Channel
4 Gb Native Fibre Channel
6 Gb/sec SAS
3 Gb/sec SAS
Ultra320 LVD SCSI
60 TB (LTO-6)
36 TB (LTO-5)
19.2 TB (LTO-4)
9.6 TB (LTO-3)
8 Gb Native Fibre Channel
4 Gb Native Fibre Channel
6 Gb/sec SAS
3 Gb/sec SAS
Ultra320 LVD SCSI
120 TB (LTO-6)
72 TB (LTO-5)
38.4 TB (LTO-4)
19.2 TB (LTO-3)
Maximum
Transfer Rate
Compressed
(2.5:1)
Compressed
(2:1)
Native
Compressed
(2.5:1)
Compressed
(2:1)
150 TB (LTO-6)
72 TB (LTO-5)
38.4 TB (LTO-4)
19.2 TB (LTO-3)
576 GB/hr (one 6250)
504 GB/hr (one 3280/3000)
432 GB/hr (one 1840)
288 GB/hr (one 1760)
432 GB/hr (two 920)
1.44 TB/hr (one 6250)
1 TB/hr (one 3280/3000)
864 GB/hr (one 1840)
576 GB/hr (one 1760)
864 GB/hr (two 920)
300 TB (LTO-6)
144 TB (LTO-5)
76.8 TB (LTO-4)
38.4 TB (LTO-3)
576 GB/hr (one 6250)
504 GB/hr (one 3280/3000)
1.0 TB/hr (two 3000)
432 GB/hr (one 1840)
864 GB/hr (two 1840)
576 GB/hr (two 1760)
216 GB/hr (one 920)
432 GB/hr (two 920)
1.44 TB/hr (one 6250)
2.88 TB/hr (two 6250)
1.0 TB/hr (one 3280)
2.0 TB/hr (two 3000)
864 GB/hr (one 1840)
1.7 TB/hr (two 1840)
1.1 TB/hr (two 1760)
432 GB/hr (one 920)
864 GB/hr (two 920)
MSL8048/8096
LTO-6 Ultrium 6250
LTO-5 Ultrium 3280
LTO-5 Ultrium 3000
LTO-4 Ultrium 1840
LTO-4 Ultrium 1760
4
Ultrium 6250, 3280, 3000,
1840, 1760)
48 (MSL8048)
96 (MSL8096)
8 Gb Native Fibre Channel
4 Gb Native Fibre Channel
6 Gb/sec SAS
3 Gb/sec SAS
Ultra320 LVD SCSI
120 TB (LTO-6, 48 slots)
72 TB (LTO-5, 48 slots)
240 TB (LTO-6, 96 slots)
144 TB (LTO-5, 96 slots)
38.4 TB (LTO-4, 48 slots)
19.2 TB (LTO-3, 48 slots)
76.8 TB (LTO-4, 96 slots)
38.4 TB (LTO-3, 96 slots)
300 TB (LTO-6, 48 slots)
600 TB (LTO-6 96 slots)
288 TB (LTO-5, 96 slots)
153.6 TB (LTO-4, 96 slots)
76.8 TB (LTO-3, 96 slots)
144 TB (LTO-5, 48 slots)
76.8 TB (LTO-4, 48 slots)
38.4 TB (LTO-3, 48 slots
1.15 TB/hr (two 6250)
2.3 TB/hr (four 6250)
1.0 TB/hr (two 3280/3000)
2.0 TB/hr (four 3280/3000)
864 GB/hr (two 1840)
1.7 TB/hr (four 1840)
576 GB/hr (two 1760)
2.88 TB/hr (two 6250)
5.76 TB (four 6250)
2.0 TB/hr (two 3280/3000)
4.0 TB/hr (four 3280/3000)
1.7 TB/hr (two 1840)
3.4 TB/hr (four 1840)
1.1 TB/hr (two 1760)
MSL2024 MSL4048 MSL8048/8096
DA - 13258 Worldwide QuickSpecs — Version 38 — 9.30.2013
Page 26
QuickSpecs HP MSL2024/MSL4048/MSL8048/MSL8096 Tape
Libraries
Technical Specifications
Dimensions
Weight
Reliability
Out-of-Box (HxWxD)
Shipping (HxWxD)
3.4 x 18.9 x 31.7 in
(8.7 x 48 x 80.6 cm)
10.7 x 23.2 x 38.9 in
(27.1 x 58.9 x 98.7 cm)
6.9 x 18.9 x 31.7 in
(17.5 x 48 x 80.6 cm)
13.7 x 23.2 x 38.9 in
(34.8 x 58.9 x 98.7 cm)
Out of box 32.9 lb (14.9 kg) 47.2 lbs (21.4 kg)
Shipping 56.9 lb (25.8 kg) 74.7 lbs (33.9 kg) 164 lbs (74.4 kg)
Note: The weight of each library varies somewhat based on the type and number of LTO tape drives contained in the configuration. The weights shown here are for MSL2024/4048/8096 configurations with 1/2/2 drives respectively per model. Configurations with different numbers of tape drives can be calculated by adding or subtracting the weight of a tape drive. An LTO-6
Ultrium 6250 drive weighs 2.10 kg/4.63 lbs.
2 Million robot load/unload cycles MSBF (mean swaps between failures)
MTBF (mean time between failures)
45 seconds
100,000 hours (based on 1M MSBF)
45 seconds
13.9 X 18.9 X 31.7 in
(35.2 x 48 x 80.6 cm)
26 X 25.8 X 40.1 in
(68.5 x 65.5 x 102.5
cm)
102.7 lbs (46.6 kg)
50 seconds Average Cartridge Swap
Time (drive to slot, slot to drive)
Initialization Time
Inventory Time 1:20 minutes
(using bar code labeled cartridges)
Average Swap Time
80 to 120 seconds
2:15 minutes
(using bar code labeled cartridges)
4:30 minutes
(using bar code labeled cartridges)
Average Cartridge Swap
Time in Extended
Libraries (drive to slot, slot to drive)
Connectors
LED Indicators
(on front panel)
Management Interface
Extended Library
Configuration
2024/4048
4048/4048
2024/8096
4048/8096
100 seconds
98 seconds
110 seconds
110 seconds
NOTE: Two MSL2024s or two MSL8096s are not supported configurations
MSL8048 must have all 96 slots enabled prior to using the Library Extender. Once all 96 slots have been enabled for use, the supported configurations are the same as 8096s.
Mini-SAS (MSL SAS model only)-
68-pin HDTS ( MSL SCSI models only)
LC Optical Fibre (MSL FC models only)
(1)RJ-45 Ethernet
(1) USB port
Ready LED (Green): shows ready status information
Clean LED (Amber): shows fault status information
Attention LED (Amber): shows fault status information
Error LED (Amber): shows fault status information
10/100 Mbytes/second, auto-configuring interface. RJ-45 connection.
Https configurable.
Power
Input Requirements
Relative Humidity
(non-condensing)
Temperature Range
(wet bulb)
Operating
Shipping
MSL2024: 168 Watts (max)
MSL4048/MSL8048/MSL8096: 312 Watts (max)
100 to 240 VAC, 50 to 60 Hz, 2.5 Amperes
20% to 80%
20% to 90%
Operating
Shipping
50° to 95° F (10° to 35° C)
-22° to 140° F (-30° to 60° C)
NOTE: Library operating temperature limits are based on the industry standard tape limit.
DA - 13258 Worldwide QuickSpecs — Version 38 — 9.30.2013
Page 27
QuickSpecs HP MSL2024/MSL4048/MSL8048/MSL8096 Tape
Libraries
Technical Specifications
Altitude Operating
Shipping
© Copyright 2013 Hewlett-Packard Development Company, L.P.
15,000 ft (3048 m)
35,000 ft (10,675 m)
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For tape drives and media, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13258 Worldwide QuickSpecs — Version 38 — 9.30.2013
Page 28
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement