- No category
advertisement
Index
Number
2 Sample Interleave ................................................... 49
3G/HD/SD-SDI .................................................... 13, 19
3G-SDI RAW ....................................................... 13, 20
5 Step (Test Pattern) .................................................. 65
200% (Screen Scaling) .............................................. 52
2020 Constant Luminance ........................................ 45
2020 Gamut Mapping ............................................... 45
A
ACESproxy ................................................................ 39
Adjustment ................................................................ 39
Adobe RGB ............................................................... 39
Anchor Adjustment .............................................. 25, 46
Area Marker ............................................................... 59
Area Marker (Camera Link) ........................................ 68
Aspect Marker ........................................................... 56
Audio Input ................................................................ 50
Audio Level Meter ...................................................... 65
Audio Settings ........................................................... 55
Automatic Adjustment (ARRI) ..................................... 67
Automatic Adjustment (CINEMA EOS) ....................... 67
B
Background Color ..................................................... 54
Backlight Control ....................................................... 39
Banner ...................................................................... 66
Bias R/G/B ................................................................ 40
Bicubic ...................................................................... 53
Black (Test Pattern) .................................................... 65
Blue Off ..................................................................... 66
Blue Only ................................................................... 66
Blue (Test Pattern) ..................................................... 65
Brightness ................................................................. 39
C
Calibration ........................................................... 26, 46
Camera Information ................................................... 68
Camera Link .............................................................. 67
Canon Log, CanonLog 2, Canon Log 3 ............... 39, 41
CDL Export/CDL Import ............................................ 30
CDL/User LUT Bypass .............................................. 44
Center Marker ........................................................... 60
Channel Name ..................................................... 31, 50
Channel Settings ....................................................... 49
Chroma ..................................................................... 39
Cinema Gamut to 709 ............................................... 40
Cinema Gamut to 2020 ............................................. 40
Cinema Gamut to DCI ............................................... 40
Color Bars (Test Pattern) ............................................ 65
Color Gamut .............................................................. 40
Color Range .............................................................. 43
Color Temperature ..................................................... 40
Compatible Settings .................................................. 70
Configure an IP Address ............................................ 70
Contrast .................................................................... 39
Custom (xy) (Color Temperature) ................................ 40
D
Date/Time ........................................................... 30, 69
DCI-P3 ...................................................................... 39
DCI-P3+ to 709 ......................................................... 40
DCI-P3+ to DCI ......................................................... 40
Detail Settings
Adjustment ............................................................ 45
CDL ....................................................................... 44
Display Button LED ................................................... 70
Display Channel ......................................................... 69
Display Function/Display Function (CDL) .................... 69
Display Name ...................................................... 31, 70
Display Settings ......................................................... 52
Dual Input .................................................................. 49
Dual Link 3G-SDI ....................................................... 49
E
EBU ........................................................................... 39
Export/Import ...................................................... 29, 71
F
False Color ................................................................ 61
Fan Control ................................................................ 70
Film Cadence ............................................................ 54
Firmware Ver. ............................................................. 74
Format ....................................................................... 50
Frame Hold ............................................................... 54
Function/Channel Button ........................................... 69
Function Guide .......................................................... 66
Function Settings ....................................................... 61
Index 101
G
Gain R/G/B ................................................................ 40
Gamma ..................................................................... 41
Gamma LUT .............................................................. 41
Gamut LUT ................................................................ 40
Gray (20%) (Test Pattern) ........................................... 65
Green Off ................................................................... 66
Green (Test Pattern) ................................................... 65
Grid Marker ............................................................... 60
H
HDMI ................................................................... 13, 20
HDR Range ............................................................... 42
HDR/SDR View ......................................................... 46
HD-SDI ................................................................ 13, 19
Hide OSD .................................................................. 69
Hybrid Log-Gamma System ...................................... 45
Hybrid Log-Gamma Y/RGB ....................................... 41
I
Image Division ........................................................... 49
Image Priority ............................................................ 54
Input Configuration .................................................... 49
Input Transform ......................................................... 43
Internal Sync ............................................................. 50
I/P Conversion ........................................................... 54
I/PsF .......................................................................... 54
ITU-R BT.709 ............................................................. 39
ITU-R BT.1886 ........................................................... 41
ITU-R BT.2020 ........................................................... 39
L
LAN ........................................................................... 13
Language .................................................................. 69
Local Dimming .......................................................... 39
LTC ........................................................................... 62
Luminance ................................................................. 46
LUT Import .......................................................... 28, 45
M
MAC Address ............................................................ 74
Marker Preset ............................................................ 56
Marker Settings ......................................................... 56
Marker/TC/WFM/VEC Input ....................................... 50
Monochrome ............................................................. 66
Multi View (Dual) ........................................................ 49
Multi View (Quad) ....................................................... 49
N
Native Input Resolution (Screen Scaling) .................... 52
Nearest Neighbor ...................................................... 53
Network .................................................................... 70
O
Offset ........................................................................ 44
OSD Menu .......................................................... 22, 33
OSD Position ............................................................. 66
OSD Size ................................................................... 66
Output Transform ...................................................... 43
Output Transform Surround ....................................... 43
P
Password .................................................................. 70
Peaking ..................................................................... 61
Peak Luminance Control ........................................... 45
Picture Function Target .............................................. 51
Picture Mode ............................................................. 39
Picture Mode R ......................................................... 50
PLUGE (Test Pattern) ................................................. 65
Power ........................................................................ 44
Power Indicator Brightness ........................................ 70
Power on Setting ....................................................... 71
Protect Settings ......................................................... 70
PsF ............................................................................ 54
Q
Quad Input ................................................................ 49
R
Ramp (Test Pattern) ................................................... 65
Red Off ...................................................................... 66
Red (Test Pattern) ...................................................... 65
Reset ......................................................................... 46
Reset All Settings ...................................................... 71
S
Safety Zone Marker 1, 2 ............................................ 57
Saturation .................................................................. 44
Scaling Method ......................................................... 53
Screen Capture ......................................................... 66
Screen Scaling .......................................................... 52
Select Channel .......................................................... 49
Select Input Signal ..................................................... 49
Separator .................................................................. 51
Serial No. ................................................................... 74
Settings ............................................................... 29, 71
Shape Trace .............................................................. 53
102 Index
Sharpness ................................................................. 39
Signal Information ...................................................... 74
Single Input ............................................................... 49
Slope ......................................................................... 44
SMPTE-C .................................................................. 39
Speed Priority ............................................................ 54
Square Division .......................................................... 49
Subnet Mask ............................................................. 70
System Information .................................................... 74
System Settings ........................................................ 69
T
Test Pattern ............................................................... 65
Time Code ................................................................ 62
U
Usage Time ............................................................... 74
USB .............................................................. 12, 26, 28
User 1-7 .................................................................... 39
User LUT ................................................................... 44
V
Various Function (Function Settings) .......................... 66
Vector Scope ............................................................. 64
VITC .......................................................................... 62
W
Wave Form Monitor ................................................... 62
White (Test Pattern) ................................................... 65
Y
YCbCr Color Matrix ................................................... 45
Z
Zoom ........................................................................ 53
Index 103
USA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED
IN THE UNITED STATES
The limited warranty set forth below is given by Canon U.S.A., Inc. ('Canon USA') with respect to Canon Professional
Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original container, when purchased in the United States. This limited warranty is only effective upon presentation of your Bill of Sale or other proof of purchase.
Canon USA warrants to the original end-user purchaser, when delivered in new condition in its original container, that the Equipment will be free from defects in materials and workmanship under normal use and service for a period of
ONE-YEAR from the date of original purchase. When returning Equipment under this warranty, you must pre-pay the shipping charges, and you must enclose a copy of the Bill of Sale or other proof of purchase with a complete explanation of the problem. Equipment returned to a Canon USA factory service facility, and proven to be defective upon inspection, will be, without charge,:
(a) repaired utilizing new or comparable refurbished parts, or
(b) exchanged for refurbished or new Equipment as determined in the Canon USA’s repair facility’s sole discretion. The repaired or exchanged Equipment will be shipped back free of charge. Warranty exchange or replacement does not extend the original warranty period of the Equipment.
For repairs after the warranty period has expired, an estimate of the cost of repair and an opportunity to approve or reject the repair expense before it is incurred will be provided. If you approve, repairs will be made and the Equipment will be returned at your risk and expense. If you reject, the Equipment will be returned to you at no charge to you to an address within the United States.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon USA will have no responsibility. Canon USA shall have no responsibility under this limited warranty for use of the
Equipment in conjunction with incompatible peripheral equipment and/or incompatible software. Non-
Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty of any kind by Canon USA, including any implied warranty regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-
Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon USA recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the
Equipment or contact the CANON INFORMATION CENTER AT 855-4K-CANON (855-452-2666) or on the internet at
pro.usa.canon.com/support. You will be directed to the nearest service facility for your Equipment.
Technical support program specifics subject to change without notice.
This Limited Warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases:
A. Loss or damage to the Equipment due to abuse, neglect, mishandling, electric current fluctuation, accident,
improper maintenance, use of non-Canon accessories or failure to follow operating, maintenance or
environmental instructions prescribed in Canon USA’s user’s manual;
B. If the Equipment is defective as a result of sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon USA) that
cause damage to the Equipment or that cause abnormally frequent service calls or service problems;
D. If defects or damages are caused by service other than Canon USA's factory service centers or authorized
service facilities;
E. Any internal modification to product hardware or firmware;
F. Any maintenance of the Equipment, including any fees for such Maintenance;
G. If the Equipment has had its serial number or dating altered or removed.
104
This Limited Warranty does not apply to Equipment purchased outside the United States. This Limited Warranty does not apply to accessories or consumables for the Equipment, which are sold “AS IS”, without warranty of any kind by
Canon USA. Please retain this warranty card and your Bill of Sale as a permanent record of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.
NO IMPLIED WARRANTY, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
APPLIES TO THIS EQUIPMENT AFTER THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR
GUARANTY UNDER THIS WARRANTY (EXCEPT AS MENTIONED ABOVE). (SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU). CANON USA SHALL NOT BE LIABLE FOR LOSS OF REVENUES
OR PROFITS, EXPENSE FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR
CORRUPTION OF DATA, INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED
ON THE EQUIPMENT’S HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE
LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF CANON USA HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON USA BE
GREATER THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON USA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF CANON USA (SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS
EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
CANON U.S.A., INC
105
CANADA
CANON PROFESSIONAL DISPLAY LIMITED WARRANTY FOR PRODUCTS PURCHASED IN
CANADA
The limited warranty set forth below is given by Canon Canada Inc. ('Canon Canada') with respect to Canon
Professional Display Equipment (the 'Equipment') accompanying this limited warranty in the Equipment’s original container, when purchased in Canada. This limited warranty is only effective upon presentation of your bill of sale or other proof of purchase.
Canon Canada warrants to the original end-user purchaser, when delivered in new condition in its original container, that the Equipment will be free from defects in materials and workmanship under normal use and service for a period of ONE YEAR from the date of original purchase. When returning Equipment under this limited warranty, you must prepay the shipping charges, and you must enclose a copy of the bill of sale or other proof of purchase with a complete explanation of the problem. Equipment returned to a Canon Canada factory service facility and proven to be defective upon inspection will be, without charge:
(a) repaired utilizing new or comparable refurbished parts, or
(b) exchanged for refurbished or new Equipment, as determined by the Canon Canada factory service center, in its sole discretion. The repaired or exchanged Equipment will be shipped back free of charge. Warranty exchange or replacement does not extend the original warranty period of the Equipment. For repairs after the warranty period has expired, an estimate of the cost of repair and an opportunity to approve or reject the repair expense before it is incurred will be provided. If you approve the proposed repairs, repairs will be made and the Equipment will be returned at your risk and expense. If you reject the proposed repairs, the Equipment will be returned to you at no charge to you to an address within Canada.
This limited warranty only applies if the Equipment is used in conjunction with compatible computer equipment, compatible peripheral equipment and compatible software, as to which items Canon Canada will have no responsibility. Canon Canada shall have no responsibility under this limited warranty for use of the Equipment in conjunction with incompatible computer equipment, peripheral equipment and/or incompatible software. Non-Canon brand peripheral equipment and software which may be distributed with, or be factory loaded on, the Equipment, are sold 'AS IS' without warranty or condition of any kind by Canon Canada, including any implied warranty or condition regarding merchantability or fitness for a particular purpose. The sole warranty with respect to such non-Canon brand items is given by the manufacturer or producer thereof. If the Equipment contains a hard disk drive, Canon Canada recommends that data stored on that drive be duplicated or backed up to prevent its loss in the event of failure or other malfunction of such drive.
In order to obtain warranty service, please contact the authorized Canon retail dealer from whom you purchased the
Equipment or contact the CANON INFORMATION CENTER at 800-667-2666 or on the internet at www.canon.ca/
pro.
Technical support program specifics are subject to change without notice.
This limited warranty covers all defects encountered in normal use of the Equipment and does not apply in the following cases:
A. Loss or damage to the Equipment due to abuse, neglect, mishandling, electric current fluctuation, accident,
improper maintenance, use of non-Canon accessories or failure to follow operating, maintenance or
environmental instructions prescribed in Canon Canada’s users manual;
B. If the Equipment is defective as a result of sand, dirt or water damage;
C. If defects or damages are caused by the use of parts or supplies (other than those sold by Canon Canada) that
cause damage to the Equipment or that cause abnormally frequent service calls or service problems
D. If defects or damages are caused by service other than Canon Canada's factory service centers or authorized
service facilities;
E. Any internal modification to product hardware or firmware;
F. Any maintenance of the Equipment, including any fees for such maintenance; or
G. If the Equipment has had its serial number or dating altered or removed.
106
This limited warranty does not apply to Equipment purchased outside Canada. This limited warranty does not apply to accessories or consumables for the Equipment, which are sold “AS IS”, without warranty or condition of any kind by
Canon Canada. Please retain this warranty card and your bill of sale or other proof of purchase as a permanent record of your purchase. This card ensures that you are contacted promptly should there be a safety inspection, modification or product recall under applicable laws or regulations.
NO IMPLIED WARRANTY OR CONDITION, INCLUDING IN RESPECT OF THE MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, APPLIES TO THIS EQUIPMENT AFTER THE EXPIRATION OF
THE APPLICABLE PERIOD OF EXPRESS WARRANTY OR GUARANTEE UNDER THIS LIMITED WARRANTY
(EXCEPT AS MENTIONED ABOVE). (SOME PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU). CANON CANADA SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS, EXPENSE
FOR SUBSTITUTE EQUIPMENT OR SERVICE, STORAGE CHARGES, LOSS OR CORRUPTION OF DATA,
INCLUDING WITHOUT LIMITATION, LOSS OR CORRUPTION OF DATA STORED ON THE EQUIPMENT’S
HARD DRIVE, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY
THE USE, MISUSE OR INABILITY TO USE THE EQUIPMENT, REGARDLESS OF THE LEGAL THEORY ON
WHICH THE CLAIM IS BASED, AND EVEN IF CANON CANADA HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST CANON CANADA BE GREATER
THAN THE PURCHASE PRICE OF THE EQUIPMENT SOLD BY CANON CANADA AND CAUSING THE
ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, YOU ASSUME ALL RISK AND LIABILITY FOR
LOSS, DAMAGE OR INJURY TO YOU AND YOUR PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF USE, MISUSE OR INABILITY TO USE THE EQUIPMENT NOT CAUSED DIRECTLY BY THE
NEGLIGENCE OF CANON CANADA (SOME PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU).
THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER
OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS A GIFT.
This limited warranty gives you specific legal rights, and you may also have other rights which vary from province to province.
CANON CANADA INC.
107
Canon Inc. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
AUSTRALIA www.canon.com.au
Canon Australia Pty Ltd
13-13-83 (within Australia only)
(61) 02-9805-2000
CANADA
CANON CANADA INC.
http://www.canon.ca/pro
❖ Professional Product Support / Soutien des produits professionnels
(800) 667-2666
CENTRO Y SURAMÉRICA
CANON LATIN AMERICA, INC.
http://www.cla.canon.com
EUROPE www.canon-europa.com
Canon Europa N.V.
Bovenkerkerweg 59,
1185 XB Amstelveen, The Netherlands
MÉXICO
CANON MEXICANA, S DE RL DE CV http://www.canon.com.mx
52 (55) 5249-4900
NEW ZEALAND www.canon.co.nz
Canon New Zealand Ltd
0800-222-666 (within New Zealand only)
(64) 09-489-0300
UNITED KINGDOM www.canon.co.uk
Canon UK Ltd
CCI Service Centre, Unit 130, Centennial Park,
Borehamwood, Hertfordshire, WD6 3SE
0844-369-0100
USA
CANON U.S.A., INC.
http://pro.usa.canon.com
http://pro.usa.canon.com/support
(855) 4K-CANON (855-452-2666)
(USA only)
캐논코리아컨슈머이미징㈜ http://www.canon-ci.co.kr
서울특별시 강남구 테해란로607, 캐논빌딩 5층
대표전화 +82(0)2-1588-8133
Canon Korea Consumer Imaging Inc.
http://www.canon-ci.co.kr
5F, Canon Bldg, 607, Teheran-ro, Gangnam-gu,
Seoul, Korea
+82(0)2-1588-8133
Visit your local Canon Web site to download the latest version of this instruction manual.
MIE-0013-000 © CANON INC. 2016
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Introduction
- 4 About this manual
- 4 Trademarks
- 4 Supplied Accessories
- 5 Important Usage Instructions
- 6 Safety Instructions and Handling Precautions
- 11 Features
- 12 Nomenclature
- 15 Installation/Connection
- 15 How to Carry the Main Unit
- 15 Procedures to attach the protection panel
- 16 Procedures to attach/detach stands
- 17 Preventing from Tipping
- 18 Mounting the Main Unit on a Stand or Wall
- 19 Connecting the Main Unit to Input Devices
- 21 Turning on the Power
- 21 Turning on the Power of the Main Unit
- 21 Installing the AC power cord clamp HC-01 (Included)
- 22 Operating the Video Display
- 22 Operating the jog dial
- 22 Basic operations to use the OSD menu
- 24 Adjusting Image Quality While Viewing the Entire Image
- 25 Temporarily Saving Parameters (Anchor Point Setting)
- 25 Enlarging the display (Zoom function) (53)
- 26 Adjusting image quality for each screen in two screen display (49)
- 26 Calibration without a PC (46)
- 28 Export/Import
- 30 Set Date/Time (69)
- 31 Inputting Characters
- 31 Using the Function (F) Buttons
- 32 Using the Channel (CH) Button
- 32 Checking Signal Information and Status of the Main Unit
- 33 OSD Menu
- 33 OSD Menu Index
- 39 Adjustment
- 49 Channel Settings
- 52 Display Settings
- 55 Audio Settings
- 56 Marker Settings
- 61 Function Settings
- 69 System Settings
- 74 Signal Information
- 74 System Information
- 75 Main specifications/Performance
- 77 Dimensions
- 78 Appendix
- 78 Supported Signal Format
- 92 Image/Frame Display
- 95 Error Messages
- 97 Troubleshooting
- 99 Software Used in This Product
- 101 Index