- No category
advertisement
Maintenance
No maintenance is required when installed in accordance with installation and wiring guidelines described in this manual.
Replacement Parts
There are no user serviceable parts inside these speakers.
Refer servicing to an authorized JBL Service Center. For the name of an authorized Service Center in your area, contact JBL Professional at the address listed below.
Warranty & Contacting JBL
These products are designed and backed by JBL Professional, the world leader in sound reinforcement. For complete JBL warranty information, to order replacement parts or to ask for clarifications to this manual, contact JBL Professional:
WITHIN THE UNITED STATES: Contact the Applications
Dept, JBL Professional, PO Box 2200, 8500 Balboa Blvd,
Northridge CA 91329 USA. In the USA you may call Monday through Fiday 8:00 am to 5:00 pm Pacific Coast Time
(818) 894-8850.
IN OTHER AREAS THROUGHOUT THE WORLD: Contact the JBL Professional Distributor in your country.
A list of JBL Professional Distributors and U.S. Service
Centers can be obtained from the JBL Professional website at www.jblpro.com.
---------------------------------------------------------------------
1 Half-space (flush mounted in ceiling)
2 Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest
factor for 100 hours continuously. Continuous Program Power is a
conservative expression of the system’s ability tohandle normal speech and
music program material, and is defined as 3 dB above the Continuous Pink
Noise Rating.
3 Half-space (in ceiling) average 1 kHz to 16 kHz.
JBL Professional
8500 Balboa Blvd, P.O. Box 2200
Northridge, CA 91329 U.S.A.
8
Product Specifications
See product specification sheets for complete specification listings.
Control 12C/T
Components: 76 mm (3 in) full-range driver
Frequency Range 1 : 68 Hz - 17 kHz
Power Capacity (low-Z): 40 W Cont. Program
Sensitivity 2
20 W Cont. Pink Noise
: 84 dB
Coverage 3 : 130˚
Max. SPL: 97 dB @ 1m ave., 103 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting)
Transformer Taps: 15W, 7.5W, 3.8W @ 70V & 100V;
plus 1.9W @ 70V
Control 14C/T
Components: 100 mm (4 in) LF driver
19 mm (3/4 in) HF driver
Frequency Range
Sensitivity
1 : 74 Hz - 20 kHz
Power Capacity (low-Z): 60 W Cont. Program
Coverage
2
30 W Cont. Pink Noise
: 87 dB
3 : 120˚
Max. SPL: 102 dB @ 1m ave., 108 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting)
Transformer Taps: 25W, 12.5W, 6.3W @ 70V & 100V;
plus 3.2W @ 70V
Control 16C/T
Components: 165 mm (6.5 in) LF driver;
Frequency Range 1
19 mm (3/4 in) HF driver
: 62 Hz - 20 kHz
Power Capacity (low-Z): 100 W Cont. Program
Sensitivity 2
50 W Cont. Pink Noise
: 91 dB
Coverage 3 : 110˚
Max. SPL: 108 dB @ 1m ave., 116 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting)
Transformer Taps: 30W, 15W, 7.5W @ 70V & 100V;
plus 3.8W @ 70V
Control 18C/T
Components: 200 mm (8 in) LF driver;
Frequency Range 1
25 mm (1 in) HF driver
: 58 Hz - 20 kHz
Power Capacity (low-Z): 180 W Cont. Program
Sensitivity 2
90 W Cont. Pink Noise
: 92 dB
Coverage 3 : 90˚
Max. SPL: 112 dB @ 1m ave., 118 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting)
Transformer Taps: 60W, 30W, 15W @ 70V & 100V;
plus 7.5W @ 70V
C10 MANUAL
Revision B
9
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project