advertisement
Radio Operation
Select Tuner As Playing Source
Press the [ / SRC ] Source button to select the
TUNER mode.
World Tuner
This unit is initially set to USA frequency intervals of
10 kHz for AM and 200 kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.
Auto Store
Only stations with sufficient signal strength will be detected and stored in the memory.
Press and hold the [PS/AS] button to automatically select six strong stations and store them into six presets. The new stations replace any stations already stored in the band.
Frequency spacing
U.S. A standard
10KHz
Europe standard
9KHz
Asia standard
9KHz
Australia standard
9KHz
Manual Store
When one expected radio station has been detected, press and hold number button 1-6 to store it in the memory.
AM
Frequency range
530-1710
KHz
531-1602
KHz
531-1620
KHz
531-1620
KHz
FM
Frequency spacing
Frequency range
Selecting The Radio Band
Press the [BAND] button on the panel to select one radio band.
200KHz
87.9-107.9
MHz
50KHz
87.5-108
MHz
50KHz
87.5-108
MHz
100KHz
87.5-108
MHz
Local Seek
When LOCAL seeking is ON, only those radio stations with strong radio signals can be received. To select
LOCAL function, press and hold the [DISP] button on the front panel, then press the [ ] / [ ] button repeatedly until LOCAL or DX display on the LCD, rotate the [VOLUME] knob to select local or distant mode.
[ ] Tuning Up / [ ] Tuning
Down Buttons
1. Press the [ ] / [ ] button change intervals step by step.
2. Press and hold the [ ] / [ ] button to seek the next strongest station.
Area Set
This option allows you to select the appropriate frequency spacing for your area.
1. Press and hold the [DISP] button.
2. Press the [ ] / [ ] button to select “AREA”
3. Rotate the [VOLUME] knob to select: “U.S.A”,
“Europe”, “Asia”, “AUST (Australia)”
4. Press the [MUTE] button to confirm.
Recalling a Preset Station
Press one numeric button among 1 to 6 on the front panel to select the corresponding stored stations.
Preset Scan
Preset scan receives the stations stored in the preset memory in order. This function is useful when searching for a desired station in the memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the [PS/AS] button again to continue receving that station.
M205/M505 9
advertisement
