Sandvik LH307
Standard brakes
Service brakes are spring applied, hydraulically released multidisc wet brakes (Posi-Stop) on all wheels, two separate circuits: one for the front and one for the rear axle. Service brakes also function as an emergency and parking brake.
Electrically driven pump for brake realeasing. Automatic brake activation, ABA.
Main components in the brake system:
Pressure accumulator, piston type
Brake pedal valve
Charging valve
Standard Lubrication system
Centralized manual lubrication
Electrical equipment
Alternator
Batteries
Starter
Driving lights
Parking lights
Brake lights
24 V 100 A, Bosch
2 x 12 V, 145 Ah
24 V, Bosch
2 pcs in front, 65W
2 pcs in rear, 65 W
2 pcs in canopy, 65 W
2 pcs in front, LED lights
2 pcs in rear (5 W)
Blinkers
Control system 5,7” display, 5 modules, inbuild system diagnostics
Safety equipment
Seat belt
Lockable main switch
Reverse alarm (CEN)
External shutdown, 2 pcs in rear
Others
Decal language
Standard manuals
Instructions Manual
Parts Manual
Service and Repair Manual
ToolMan CD, (2 pcs)
-Instructions Manual
-Parts Manual
-Service and Repair Manual
EU-languages
EU-languages
EU-languages
English
English
In pdf format
TECHNICAL SPECIFICATION
LH307-09 (23.11.2010)
3/3
Main options:
* Replaces standard equipment
* Bucket size 2,7 m
3
(3.5 yd
3
), width 1953 mm (75”),
GET abrasion system
• * Bucket size 3,3 m 3
(4.3yd
3
), width 2153 mm (83”),
GET abrasion system
• * Bucket size 3,7 m 3
(4.8yd
3
), width 2153 mm (83”),
GET abrasion system
• * Ejector bucket, 3.0 m 3
(4.0yd
3
), width 2100 mm (83”),
HB500/400
• * Safety cabin, ROPS/FOPS, height 2250 mm, A/C, electrical steering & bucket control
• * Automatic central lubrication
• Emergency steering (CEN)
• Fire suppression system ANSUL, 6 nozzles (CEN), including auto engine shut down
• Fire suppression system ANSUL, 6 nozzles (CEN),
CHECKFIRE, including auto engine shut down
• Sandvik FS1000 fire suppression system
• Fire extinguisher 12kg
• RRC HBC, complete
• Radio remote control interface HBC
• RRC recovery kit, hook included
• Ride control system
• Load weighing device, Tamtron PKV 300 M
• Load weighing device, Tamtron PKV 300 C
• Accordance with CE-norms (CEN)
• Disassembly needed shaft dim: TBA
• Rotating beacon (CEN with RRC)
• Wiggins fluid fill set (hydr., transmission and engine oil)
• Wiggins fuel fill system
• CatBase/LinkOne spare part manuals and additional
Instructions, Workshop, Spare part manuals, ToolMan CD’s are available
Sandvik Mining and Construction reserves the right to change this specification without further notice
ISO 9001 ISO 14001
CERTIFICATED
FIRM
CERTIFICATED
FIRM
Sandvik Mining and Construction Oy
P.O. Box 434
20101 Turku, Finland
Tel. +358 205 44 131
Fax +358 205 44 130 www.smc.sandvik.com
