Tyres 18.00 x 25
Bucket 3.8m
3
TORO 400
TECHNICAL SPECIFICATION
L00400-2
1/2
SANDVIK TAMROCK reserves the right to change this specification without further notice
ISO 9001 ISO 14001
CERTIFICATED
FIRM
CERTIFICATED
FIRM
SANDVIK TAMROCK Corp., P.O. Box 434
FIN-20101 Turku, Finland
Tel. +358 20544131
Fax. +358 20544130 e-mail: [email protected]
Internet: www.toro.sandvik.com
TORO 400
TECHNICAL SPECIFICATION
L00400-2
2/2
Weights
Operating weight
Total loaded weight
Shipping weight
Capacities
Tramming capacity
Breakout force, lift
Breakout force, tilt
Tipping load
Bucket std.
Bucket motion times
Raising time
Lowering time
Tipping time
22 800 kg (50 266 lb)
32 400 kg (71 430 lb)
22 300 kg (49 163 lb)
9 600 kg (21 164 lb)
200 kN (20 400 kg) (44975 lb)
189 kN (19 300 kg) (42550 lb)
24 000 kg (52 911 lb)
3,8 m³ (5.0yd³), HB500/400
7.0 sec.
4.0 sec.
2.5 sec.
Driving speeds forward and reverse
1st gear 5.1 km/h (3.2 mph)
2nd gear
3rd gear
4th gear
10.3 km/h (6.4 mph)
17.0 km/h (10.6 mph)
27.0 km/h (16.8 mph)
Engine
Diesel engine
Output
Torque
Number of cylinders
Displacement
Cooling system
Combustion principle
Electric system
Air filtering
Exhaust system
Fuel tank capacity
Water tank capacity
Optional engine
Optional engine
DEUTZ F10L 413 FW
158 kW/2200 r/min (215 hp)
765 Nm 1500 r/min
V 10
15 953 cm³
Air cooled
Swirl-chamber, four stroke
24V
Donaldson
Catalytic purifier
290 l (76 gal.)
290 l (76 gal.)
Engine DEUTZ F10L413FWB, 158 kW.
Engine CAT 3306 PCT and
DONALDSON.
Drive line
Converter
Gearbox
Axles
Dana SOH, C 5402
Dana SOH, R 32421
Front, Dana SOH, 19 D
Rear, Dana SOH, 19 D, oscillating ± 10°
Tyres
Size and type 18.00x25 L5S, Bridgestone
Other type of tyres available to user’s choice. In certain applications the productive capabilities of the loader may exceed the TKPH value given by tyre manufacturer.
Sandvik Tamrock recommend that the user consult their tyre supplier to evaluate conditions and to find the best solution for application.
Operators compartment
Safety canopy, height 2320 mm (91”)
Lubrication system
Centralized manual lubrication
Manual languages
Spare part manual:
Operation instructions
Maintenance instructions
Engine spare part information
Machine spare part information
Workshop manual
Operation instructions
Maintenance instructions
Engine workshop manual
Power train components manual
Optional equipment instructions main European languages main European languages
English
English main European languages main European languages
Original
Original
English
Optional bucket sizes
• Bucket size 4.3 m
3
(5.6 yd
3
), width 2440 mm (96”),
HB500/400.
• Bucket size 4.6 m 3 (6.0 yd 3 ), width 2440 mm (96”),
HB500/400.
• Side tipping bucket 3.8 m
• Ejector bucket 4.6 m
3
3 (5.0 yd 3 ).
(6.0 yd
3
).
SANDVIK TAMROCK reserves the right to change this specification without further notice
ISO 9001 ISO 14001
CERTIFICATED
FIRM
CERTIFICATED
FIRM
SANDVIK TAMROCK Corp., P.O. Box 434
FIN-20101 Turku, Finland
Tel. +358 20544131
Fax. +358 20544130 e-mail: [email protected]
Internet: www.toro.sandvik.com
