16
Initial Settings
Power switch
Menu button
Four-way controller
OK button
Display button
When you turn the camera on for the first time, the initial settings screen will be displayed.
You can set the following items and save the settings.
● Display Language
You can choose the language in which the menus, error messages etc. are displayed from the following: English, French,
German, Spanish, Italian and Japanese.
● City
You can choose the name of the city in which you will use the camera from 62 cities.
See p.81 for the list of cities and code names.
● Date and Time
You can set the present date and time. The date and time that you set here becomes the Home Time.
memo
You can skip this operation by pressing the Menu button. In this case, the initial settings screen will be displayed again when you next turn the camera on.
z
Turn the camera on.
1. Press the power switch.
The camera will turn on and the initial settings screen will be displayed on the LCD monitor.
x
Select the display language.
1. Use the four-way controller ( or ) to select the display language.
2. Press the four-way controller
( ).
Initial satting
Language/ English
City NYC
DST
MENU Exit OK Ok
Caution If you skip this operation, the menus and error messages etc. will be displayed in English.
c
Select the nearest city in the time zone in which you will use the camera.
1. Use the four-way controller ( ) to select the city.
2. Press the four-way controller ( ).
3. Use the four-way controller (
) to enable ( ) or disable
( ) summer time.
4. Press the OK button.
The screen for setting the date and time will be displayed.
v
Set the date and time.
1. Press the four-way controller ( year.
Initial satting
Language/ English
City NYC
DST
MENU Exit OK Ok
) to change the
2. Press the four-way controller
( ).
and will be displayed above and below the month.
Date Adjust
1 / 1 / 2001
00 : 00
3. Repeat Steps 1 and 2 to change the [month] [day] [hour] and
DISP 12/24 MENU Exit OK Ok
[minutes] and select the 12-hour or 24-hour display format with the Display button.
4. When you have finished the settings, press the OK button when the clock reaches 00 seconds.
The screen confirming the settings will be displayed and the camera is ready to take a picture.
memo
You can change the settings after they have been made.
Refer to “Changing the Display Language” (p.76), “Setting the
World Time” (p.74) and “Changing the Date/Time” (p.73).
17
