Customizing Your Device. Garmin Asus Nüvifone A10, A10, Garmin-Asus A10, Nuvifone A10 - Garmin-Asus


Add to my manuals
134 Pages

advertisement

Customizing Your Device. Garmin Asus Nüvifone A10, A10, Garmin-Asus A10, Nuvifone A10 - Garmin-Asus | Manualzz

Customizing Your

Device

Wireless Manager

From the Home screen, touch >

Settings > Wireless Manager.

Airplane Mode—see

page 24 .

Wi-Fi—see

page 93 .

Data—see below.

NoTe: Data charges apply when the data connection is on.

Bluetooth—see page 91

.

VPN—allows you to configure and connect to a Virtual Private

Network (VPN). Contact your network administrator for the necessary information.

Customizing Your Device

Data Connection Settings

Notice

There may be additional charges from your service provider to use the data connection while roaming.

From the Home screen, touch >

Settings > Wireless Manager > Data.

Data Connection—turns on the data connection.

NoTe: Data charges apply when the data connection is on.

Data Roaming—turns on the data connection when roaming.

NoTe: There may be additional charges from your service provider to use the data connection while roaming.

internet Sharing—shares the data connection with the computer when connected with a USB cable.

Garmin-Asus A10 Owner’s Manual 95

Customizing Your Device

Network Preference—allows you to select your preferred type of network.

Access Point Names—displays connected data service access points.

Audio Settings

From the Home screen, touch >

Settings > Audio and Display.

Volume Levels—allows you to adjust the volume levels of each output.

Ringtones—allows you to select a ringtone for phone calls.

Notifications—sets the ringtone for notifications, such as text messages.

Ring Style—sets the ring style to

Ring only, Vibrate only, Ring +

Vibrate, or Silent.

Audible Touch Tones—plays a tone when you dial.

96

Audible Selection—plays a tone when you touch the screen.

Haptic Feedback—sets the device to vibrate when you press certain soft keys.

SD Card Notifications—sets the device to vibrate when you eject or remove the memory card.

Display Settings

From the Home screen, touch >

Settings > Audio and Display.

Brightness—changes the brightness of the screen. Decreasing the brightness can save battery power. Auto Brightness sets the brightness based on the ambient lighting.

Garmin-Asus A10 Owner’s Manual

Color Mode—sets a light background (Daytime), a dark background (Nighttime), or automatically switches between the two based on the sunrise time and sunset time for your current location (Auto).

Screen Timeout—sets how the screen automatically shuts off if the device is inactive for the selected length of time.

orientation—allows the phone to rotate the screen display as you rotate the device.

Animation—enables animations when you open or close windows.

Screenshot—allows you to take a picture of the device screen.

Customizing Your Device

Adjusting the Screen Timeout

Length

1. From the Home screen, touch >

Settings > Audio and Display >

Screen Timeout.

2. Select a time.

3. Touch Save.

Taking a Screen Shot

1. From the Home screen, touch >

Settings > Audio and Display >

Screenshot.

2. Touch and hold to take a picture of a screen.

Screen shots are saved in the

“Screenshot” folder on the device.

Garmin-Asus A10 Owner’s Manual 97

Customizing Your Device

Phone Settings

From the Home screen, touch >

Settings > Phone.

Call Waiting—see page 20

.

Call Forwarding—see page 23

.

Call Barring—see page 23

.

Caller iD—sets a preference for sending caller ID information when you make phone calls.

Voice Mail Number—sets the number to access voice mail, usually the same as your phone number.

TTY—enables TTY

(teletypewriter) mode. This requires the use of a TTY adapter (part number 010-11459-03), available at www.garminasus.com/a10/ tty_adapter .

98

Hearing Aid Mode—optimizes the phone speaker for use with hearing aids.

Fixed Dialing Numbers—enables you to set up your device so that it can only dial certain phone numbers.

Network operators—searches for local networks.

Enabling and Adding Fixed

Dialing numbers

Before you can change the Fixed

Dialing Numbers (FDN) settings, you must acquire the FDN PIN for your

SIM card from your service provider.

1. From the Home screen, touch >

Settings > Phone > Fixed Dialing

Numbers > enable FDN.

2. Enter the FDN PIN, and touch

Save.

3. Touch Manage FDN List > >

Add contact.

Garmin-Asus A10 Owner’s Manual

4. Enter a name and number, and touch Save.

5. Enter the FDN PIN to add the contact to the FDN phone number list.

NoTe: You must enter the FDN PIN to disable FDN.

Home Screen

Home Screen Style—changes the

Home screen to the Classic Home or the Breeze Home, which uses panes.

Change Wallpaper—see page 9 .

navigation Settings

Voice—sets the language used for all voice prompts and messages.

Traffic Service—enables the traffic service.

Safe Mode—prevents you from entering data when your vehicle is

Garmin-Asus A10 Owner’s Manual

Customizing Your Device in motion.

Background Data—enables

Garmin Connected Services to access data in the background.

Changing the navigation Voice

1. From the Home screen, touch >

Settings > Navigation > Voice.

2. Select a language.

3. Touch oK.

Turning Off the Traffic Service

1. From the Home screen, touch >

Settings > Navigation.

2. Touch the Traffic Service check box to clear it and turn off the traffic service.

Automobile and Pedestrian navigation Settings

You can adjust the navigation settings for Automobile (Driving) and

Pedestrian (Walking) usage modes.

99

Customizing Your Device

From the Home screen, touch >

Settings > Navigation.

Route Preference—sets the preference for calculating routes.

Map Detail—sets the level of detail on the map. More detail may result in slower map drawing.

Map View—sets the perspective of the Map page.

◦ Track Up displays the map in two dimensions (2-D) with your direction of travel at the top.

◦ North Up displays the map in

2-D with North at the top.

◦ 3-D displays the map in three dimensions, with Track Up orientation (default).

Avoidances—types of roads and maneuvers the device should attempt to avoid when creating routes, available for Automobile

(Driving) mode only.

100

Notification Type—sets the method for which you are notified of maneuvers in the route, available for Pedestrian (Walking) mode only.

Vehicle or Avatar—changes the icon to represent your position on the map.

Auto Dim Brightness— automatically dims the backlight while navigating.

Trip Log—displays the path of your travels on the map.

Changing Public

Transportation navigation

Settings

Public Transportation settings are available when cityXplorer maps are loaded.

1. From the Home screen, touch

> Settings > Navigation > Public

Transportation.

Garmin-Asus A10 Owner’s Manual

2. Select the types of public transportation you would like to take.

Disabling Proximity Points

If you have loaded proximity points, such as safety cameras and custom

POIs, you can disable them without removing them from the device.

1. From the Home screen, touch >

Settings > Navigation > Proximity

Points.

2. Clear the check box for the type of proximity points you want to disable.

Downloading Safety Cameras

 CAUTIOn

Garmin and ASUS are not responsible for the accuracy of, or the consequences of using, a custom point of interest (POI) or a safety camera database.

Garmin-Asus A10 Owner’s Manual

Customizing Your Device

This service may be available as a paid subscription. This service is not available in all areas. A data connection is required for this feature.

1. From the Home screen, touch

> Settings > Navigation >

Download Safety Cameras.

2. Select a region or regions.

3. Touch Download.

Viewing Map Information

From the Home screen, touch >

Settings > Navigation > > Map

info.

A list of installed maps appears.

NoTe: Select or clear the check box next to a map to enable or disable the map.

E-mail Account Settings

From the Home screen, touch

> Settings > email, and touch an account.

101

Customizing Your Device

Account info—contains information about this account, such as the password (

page 59 ).

email Check interval—sets the frequency for checking for new e-mail.

email Sync Back Days—sets the length of time to synchronize e-mail.

Calendar Sync Back Days—sets the length of time to synchronize the calendar.

email Notifications—sets how you are notified when you receive an e-mail.

Select Ringtone

Vibrate

Use Signature

Signature—see page 59

.

102

Contacts Settings

From the Home screen, touch >

Settings > Contacts.

Sort Contacts By—sorts contacts by first or last name.

Hide Contacts with No Phone— hides contacts that do not have a phone number.

Calendar Settings

From the Home screen, touch >

Settings > Calendar.

Set Default Reminder Time—sets the number of minutes before an appointment that the device should notify you of the appointment.

Reminder Style—sets how the device notifies you of an upcoming appointment.

Set Reminder Ringtone—sets the ringtone that notifies you of an upcoming appointment.

Garmin-Asus A10 Owner’s Manual

Set Snooze Time—sets the amount of time to snooze when you touch

Snooze on a calendar notification.

Vibrate—sets whether the device vibrates to notify you of an upcoming appointment.

Messaging Settings

From the Home screen, touch >

Settings > Messaging.

Delivery Reports—requests a delivery report for each SMS and

MMS message you send.

Manage SiM card messages— allows you to copy or delete SMS messages stored on your SIM card.

SMSC—allows you to change the short message service center

(SMSC) number, if necessary.

Read Reports—requests a read report for each MMS message you send.

Customizing Your Device

Auto-retrieve—retrieves MMS messages automatically when you are not roaming.

Roaming Auto-retrieve—retrieves

MMS messages automatically when you are roaming.

Creation Mode—limits the size and type of MMS message attachments for compatibility with all service providers.

Notifications—displays a notification in the status bar when you receive a message.

Select Ringtone—sets a ringtone to play when you receive a message.

Vibrate—sets how the device vibrates when you receive a message.

Cell Broadcast Service—see

page

56

.

Garmin-Asus A10 Owner’s Manual 103

Customizing Your Device

Browser Settings

General Browser Settings

From the Home screen, touch >

Settings > Browser.

Set Home Page—sets the browser

home page ( page 68

).

Block Pop-ups—blocks pop-up windows while browsing.

Auto-fit Web Pages—resizes Web pages to fit the screen.

Load images—allows you to view images on Web pages.

Set Text Size—sets the size of text that the browser uses to display

Web pages.

enable JavaScript—allows

JavaScript.

Map URL Handling—adjusts how map URLs are opened:

enable Support—allows map

URLs to be opened in Garmin

104 maps.

Set as Default—opens map

URLs in Garmin maps by default.

Browser Privacy Settings

From the Home screen, touch >

Settings > Browser.

Accept Cookies

Remember Form Data

Clear Cache

Clear History

Clear Cookies

Clear Form Data

Browser Security Settings

From the Home screen, touch >

Settings > Browser.

Remember Passwords—saves user names and passwords for Web sites.

Show Warnings—displays a

Garmin-Asus A10 Owner’s Manual

warning when the browser detects a problem with the security of a

Web site.

Clear Passwords—clears saved password information.

Quick Search Settings

From the Home screen, touch >

Settings > Quick Search.

Searchable items—sets what is searched when using the Search widget.

Clear Search Shortcuts—clears the shortcuts to recently selected search results.

Google Search Settings—changes the search settings for Google

Mobile Services.

Managing Applications

Notice

Cleared data cannot be restored.

Garmin-Asus A10 Owner’s Manual

Customizing Your Device

1. From the Home screen, touch

> Settings > Application

Management > Manage

Applications.

A list of applications appears, showing the amount of memory used for each application.

2. Touch to sort or filter the list

(optional).

3. Touch an application to view details, including storage size, cache size, defaults, and permissions.

4. Select one or more options:

• Touch Uninstall to remove the application from your device, if available.

• Touch Clear data to clear stored data associated with the application.

• Touch Clear cache to clear cached data for the application.

105

Customizing Your Device

• Touch Clear defaults to clear application defaults.

• Touch Force Stop to close the application.

Allowing the Installation of

Applications

You can allow the installation of applications from outside the Android ™

Market.

1. From the Home screen, touch

> Settings > Application

Management > Manage

Applications.

2. Select the Unknown Sources check box.

Accounts and Sync

Settings

From the Home screen, touch >

Settings > Accounts and Sync.

Background Data—allows applications, such as e-mail, to send

106 and receive data at any time.

Auto-sync—allows applications, such as e-mail, to synchronize with the server automatically.

• Select an account to change the sync settings.

For information about e-mail account

settings, see pages 101–102

.

Security and Location

Settings

From the Home screen, touch >

Settings > Security and Location.

My Parking Spot—saves your parking spot when you remove the device from the mount while power is applied to it.

Use Wireless Networks— determines your location using

Wi-Fi and mobile networks.

Use GPS Satellites—determines your location using GPS satellites.

Garmin-Asus A10 Owner’s Manual

Using a Pattern to Unlock the

Screen

When the screen-unlock pattern is turned on, you must enter a pattern to unlock the device. You can still use the device to contact emergency services without using the screen-unlock pattern.

1. From the Home screen, touch >

Settings > Security and Location

> Set Unlock Pattern.

2. Follow the on-screen instructions to create an unlock pattern.

If you forget your pattern, contact

Product Support. Your device can be unlocked, but all personal information is erased in the process. See

page 110

for more information.

Locking the SIM Card

Use these settings to require a PIN to enable all non-emergency features of the device. You can still use the device

Customizing Your Device to contact emergency services without a PIN. You can remove the SIM card to use the non-telephone features of the device.

1. From the Home screen, touch >

Settings > Security and Location

> Set up SiM Card Lock > Use

SiM Card Lock.

2. Enter a PIN, and touch oK.

If you forget your SIM PIN, contact your service provider to obtain a

Personal Unblocking Key (PUK).

Viewing Passwords as you

Type Them

1. From the Home screen, touch >

Settings > Security and Location.

2. Select the Visible Passwords check box.

Garmin-Asus A10 Owner’s Manual 107

Customizing Your Device

Setting a Credential Storage

Password

You can store security credentials, such as passwords and certificates, for quick access.

1. From the Home screen, touch >

Settings > Security and Location

> Set Password.

2. Enter a password, and touch oK.

Use Secure Credentials is automatically selected.

Changing the Text

Language

NoTe: Changing the text language does not change the language of map data, such as street names or userentered data.

1. From the Home screen, touch

> Settings > Language and

Keyboard > Language.

108

2. Touch a language for all on-screen text.

Keyboard Settings

From the Home screen, touch >

Settings > Language and Keyboard.

Text Completion—displays suggested words as you enter text.

Auto Capitalization— automatically capitalizes the first word in a field.

enable Keyboards—enables keyboards for different languages.

Date and Time Settings

From the Home screen, touch >

Settings > Date and Time.

Automatic—uses the network settings for the date and time.

If you clear the Automatic check box, you can set the following items:

Garmin-Asus A10 Owner’s Manual

Set Date—allows you to set the date manually.

Set Time—allows you to set the time manually.

Set Time Zone—allows you to select a time zone manually.

Date Format—sets the date format.

Time Format—sets the time format to 12-Hour, 24-Hour, or

UTC.

Units Settings

From the Home screen, touch >

Settings > Units.

Distance—units of measure for distance.

Temperature—units of measure for temperature.

Coordinates—units of measure for the coordinates format.

Customizing Your Device

Privacy Settings

From the Home screen, touch >

Settings > Privacy.

NoTe: Sharing your location information and feedback requires the use of your data plan, and any associated charges would apply.

Share with Google—allows

Google applications to use location information.

Connected Services Feedback— allows Garmin to collect your speed, direction, and location information and share it with strategic partners and service providers to enhance the quality of the content the device receives.

Garmin-Asus A10 Owner’s Manual 109

Customizing Your Device

Clearing All User Data

Notice

This process restores all settings to factory defaults and removes all user data.

Any items that you have saved on your device, such as Saved Locations, photos, and contacts, are erased.

Any applications you have purchased and downloaded are removed. You should be able to download and install the applications again.

Map data is not erased.

Cleared data cannot be restored.

From the Home screen, touch

> Settings > Privacy > Master

Clear.

Changing the Storage

Settings

1. From the Home screen, touch >

Settings > Storage.

2. Scroll to view the total space and available space for each storage type.

3. Touch Default Storage.

4. Select internal Storage or SD

Card.

5. Touch Save.

Viewing Software

Information

1. From the Home screen, touch >

Settings > About Phone.

2. Touch an item.

110 Garmin-Asus A10 Owner’s Manual

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents