advertisement
Application area
Functional principle
3 Product description
1
2
3
15
14
13
4 12
5
6
7
8
11
10
9
Fig. 2: Layout of the type label (example)
1 Instrument type
2 Product code
3 Approvals
4 Process and ambient temperature, process pressure
5 Power supply and signal output, electronics
6 Protection rating
7 Probe length
8 Order number
9 Serial number of the instrument
10 Material, wetted parts
11 Symbol of the device protection class
12 Reminder to observe the instrument documentation
13 ID numbers, instrument documentation
14 Notified authority for CE marking
15 Approval directives
With the serial number, you can access the delivery data of the instrument via "www.vega.com", "VEGA Tools" and "Instrument search".
You can find the serial number on the inside of the instrument as well as on the type label on the outside.
3.2 Principle of operation
The VEGACAL 63 sensor can be used universally for level measurement in conductive and non-conductive liquids.
The rod probe is fully insulated and the proven mechanical construction offers high functional safety.
Probe, measured product and vessel wall form an electrical capacitor.
The capacitance is influenced by three main factors.
VEGACAL 63 • 4 … 20 mA/HART - two-wire 9
advertisement
Related manuals
advertisement
Table of contents
- 4 1.1 Function
- 4 1.2 Target group
- 4 1.3 Symbols used
- 5 2.1 Authorised personnel
- 5 2.2 Appropriate use
- 5 2.3 Warning about incorrect use
- 5 2.4 General safety instructions
- 6 2.5 Safety label on the instrument
- 6 2.6 EU conformity
- 6 2.7 Fulfillment of NAMUR recommendations
- 6 2.8 Installation and operation in the USA and Canada
- 6 2.9 Safety instructions for Ex areas
- 6 2.10 Environmental instructions
- 8 3.1 Configuration
- 9 3.2 Principle of operation
- 10 3.3 Adjustment
- 11 3.4 Packaging, transport and storage
- 11 3.5 Accessories and replacement parts
- 13 4.1 General instructions
- 15 4.2 Mounting instructions
- 17 5.1 Preparing the connection
- 18 5.2 Connection procedure
- 19 5.3 Wiring plan, single chamber housing
- 21 5.4 Wiring plan, double chamber housing
- 23 5.5 Wiring plan, Ex-d double chamber housing
- 25 5.6 Wiring plan - version IP 66/IP 68, 1 bar
- 26 6.1 Short description
- 26 6.2 Insert display and adjustment module
- 27 6.3 Adjustment system
- 28 6.4 Setup steps
- 38 6.5 Menu schematic
- 39 6.10 Saving the parameterisation data
- 40 7.1 Connect the PC
- 41 7.2 Parameter adjustment with PACTware
- 42 7.3 Parameter adjustment with AMS™ and PDM
- 43 7.4 Saving the parameterisation data
- 44 8.1 Maintenance