advertisement
Insulation Tools/Dielectric Union
SPECIFICATIONS:
Jones Stephens Corp. • PlumBest™ • LTConnections™
Poly Pipe Insulation Tees & Elbows
• 100% closed cell polyethylene
• UPS shippable cartons - CARTON QUANTITIES ONLY
• Complete seal on hot or cold pipe
• Two strips of self-adhesive to seal easily
Density: 1.5 lbs./cubic foot; Mold growth: None;
Temperature Range: -90° to 180°F; Flame/Smoke:
25/50; Water vapor permeability: less than .02
Thermal Expansion Tanks
• Designed for the protection of potable hot water systems
• Install between the backflow preventer an the water heater
• Specifications:
Factory pre-charge: 40psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
C inches; Ozone resistance: Good
PART NO.
R15202
DESCRIPTION
2 gallon tank
CTN. QTY.
PALLET QTY.
1 150
PART NO.
DESCRIPTION WALL THICKNESS CTN/MSTR
R15204 4-1/2 gallon tank 1 80
I59050
I59075
I59100
I59125
I59150
I59175
I59200
I59225
1/2” Tee
3/4” Tee
1” Tee
1-1/4” Tee
1/2” Elbow
3/4” Elbow
1” Elbow
1-1/4” Elbow
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
3/8”
1/16
1/12
1/12
1/8
1/32
1/20
1/16
1/12
Insulation Contact Adhesive
• Brush top cans
• For use with rubber insulation only
• CARTON QUANTITIES ONLY
• MOTOR FREIGHT ONLY/FLAMMABLE
• Designed for the protection of potable hot water systems
• Install between the backflow preventer and the water heater
• Specifications:
Factory pre-charge: 15psi
System Connection: 304 Stainless Steel
Diaphragm: Butyl Rubber
Liner Material: Food Grade Polypropylene
Max. Operating Temp.: 200°F
Max. Operating Pressure: 150psi
PART NO.
DESCRIPTION CTN. QTY.
PALLET QTY.
PART NO.
IA1050
IA1100
IA2050
IA2100
DESCRIPTION
Fast Tack 1/2 pint
Fast Tack 1 pint
Slow Tack 1/2 pint
Slow Tack 1 pint
CTN QTY
48
24
48
24
R15206 2 gallon tank 1 150
Insulation Protective Coating
Dielectric Union - Lead Free
Female x Sweat Male x Sweat
• Prevents electrolysis or galvanic action when connecting dissimilar metals
• Residential or commercial use
• Zinc plated forged steel
• Solder ends conform to ANSI B16.19
• EPDM washer, ABS fiber sleeve
• Threads conform to ASNI B2.1
• Pressure rated at 250 PSI at 180°F
PART NO.
IPC004
Insulation Tape
SIZE
1 gallon
CTN QTY
4
Female x Sweat
PART NO.
FIP x COPPER SWEAT
D06050
D06075
D06100
D06125
D06150
D06200
1/2” x 1/2”
3/4” x 3/4”
1” x 1”
1-1/4” x 1-1/4”
1-1/2” x 1-1/2”
2” x 2”
OD
5/8”
7/8”
1-1/8”
1-3/8”
1-5/8”
2-1/8”
CTN/MSTR
24/144
12/144
12/120
6/48
6/48
6/24
PART NO. DESCRIPTION
INT001
INT002
1/8” x 2” x 30’ cork tape
1/8” x 2” x 30’ tape
Flanged Dielectric Union
• Temperature range: 180°F at 200 PSI
• Maximum temperature 200°F
CTN QTY
12
12
Reducing
PART NO.
FIP x COPPER SWEAT
D06350 3/4” x 1/2”
Male x Sweat
PART NO.
MIP x COPPER SWEAT
D06005
D06750
1/2” x 1/2”
3/4” x 3/4”
Reducing
PART NO.
MIP x COPPER SWEAT
D06755 3/4” x 1/2”
OD
5/8”
OD
7/8”
7/8”
OD
5/8”
CTN/MSTR
24/144
CTN/MSTR
12/144
24/96
CTN/MSTR
24/144
PART NO.
D06250
D06300
D06400
FIP x COPPER SWEAT
2-1/2” x 2-1/2”
3” x 3”
4” x 4”
CTN/MSTR
1/5
1/5
1/5
108 Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
PART NO.
D06753
D06450
D06500
D06510
D06525
D06550
D06600
D06650
D06700
Jones Stephens Corp. • PlumBest™ • LTConnections™
Universal Copper Thermocouple
Water Heater Connectors
PlumBite Push On Water Heater Connector
PART NO.
J36118
J36124
J36130
J36136
• All copper with brass fittings
• Adaptable to 5 different pilot valves
• Kit includes 2 clips and nuts
• Individually carded
LENGTH
18”
24”
30”
36”
CTN/MSTR
10/100
10/100
1/10
1/10
PART NO.
C76605
C76606
• Leak-Free, Tool-Free & Solvent Free
• Approved for behind-the-wall
installation
• Fittings may be reused if necessary
• Internal PEX Tube insert provided for
Perfect PEX connections
• For use with hot and cold potable water
• Operating temperature 0°F to 200°F, 200 PSI
SIZE
1/2” Push Fitting x 3/4” FIP x 12”
1/2” Push Fitting x 3/4” FIP x 15”
CTN/MSTR
1/80
1/80
C
J36148 48” 1/10 C76607
C76608
1/2” Push Fitting x 3/4” FIP x 18”
1/2” Push Fitting x 3/4” FIP x 24”
1/80
1/80
Gasket and Insert for Dielectric Union
• For water
• 200°F temperature rating
C76612
C76613
C76614
C76615
C76616
C76617
3/4” Push Fitting x 3/4” FIP x 12”
3/4” Push Fitting x 3/4” FIP x 15”
3/4” Push Fitting x 3/4” FIP x 18”
3/4” Push Fitting x 3/4” FIP x 24”
1/2” Push Valve x 3/4” FIP x 18”
3/4” Push Valve x 3/4” FIP x 18”
1/80
1/80
1/80
1/80
1/80
1/80
Insert Gasket
Insert
Corrugated Water Heater Connector
PART NO. DESCRIPTION
D06800 1/2” insert
D06801
D06802
3/4” insert
1” insert
D06803
D06804
D06805
1-1/4” insert
1-1/2” insert
2” insert
Gasket
PART NO. DESCRIPTION
D06850 1/2” gasket
D06875
D06900
3/4” gasket (EPDM rubber)
1” gasket
D06901
D06902
D06903
1 1/4” gasket
1 1/2” gasket
2” gasket
CTN QTY
25
25
25
25
25
25
CTN QTY
25
25
25
25
25
25
Copper
• Corrugated for easy flex on water heaters and softeners
• Includes rubber washers
PART NO.
J34712
J34715
J34718
J34724
FPT x LENGTH
3/4” x 12”
3/4” x 15”
3/4” x 18”
3/4” x 24”
CTN/MSTR
1/50
1/50
1/50
1/50
PART NO.
FIP x SWT x LENGTH CTN/MSTR
J35712 3/4” x 3/4” x 12” 25/50
J35715
J35718
J35724
3/4” x 3/4” x 15”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
25/50
25/50
25/50
Dielectric Nipple
• 180° maximum temperature
• Prevents corrosion, lime and scale buildup
• Adds years of life to any water system
• For use on water heaters, dishwashers, water filtration systems
• Electroplated steel casing with non-corrosion thermoplastic lining
Stainless Steel
PART NO.
FIP x MIP x LENGTH CTN/MSTR
J36712 3/4” x 3/4” x 12” 1/25
J36715
J36718
3/4” x 3/4” x 15”
3/4” x 3/4” x 18”
1/25
1/25
J36724 3/4” x 3/4” x 24” 1/25
SIZE
3/4” MIP x 3” length
1/2” MIP x 3” length
1” MIP x 3” length
1” MIP x 4” length
1 -1/4” MIP x 4” length
1-1/2” MIP x 4” length
2” MIP x 4” length
2-1/2” MIP x 6” length
3” MIP x 6” length
CTN/MSTR
1/200
1/350
1/100
1/100
1/30
1/30
1/30
1/20
1/12
PART NO.
MIP x FIP x LENGTH CTN/MSTR
J38712 3/4” x 3/4” x 12” 25/50
J38715
J38718
J38724
3/4” x 3/4” x 15”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
25/50
25/50
25/50
PART NO.
FIP x FIP x LENGTH CTN/MSTR
J39712 3/4” x 3/4” x 12” 25/50
J39715
J39718
J39724
3/4” x 3/4” x 15”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
25/50
25/50
25/50
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
109
Water Heater Supplies
Jones Stephens Corp. • PlumBest™ • LTConnections™
Braided Stainless Steel Water
Heater Connector
• UPC listed
• LEAD FREE
PART NO.
FIP x LENGTH CTN/MSTR
Water Heater Safety Pan
• Supplied with 1” hookup adapter for any drain type
(J34-800)
• 2 1/2” depth
• High impact plastic
• Southern Building Code and natural gas approved
• CARTON QUANTITIES ONLY
C
S04350
S04351
S04352
3/4” x 12”
3/4” x 18”
3/4” x 24”
10/40
10/40
10/40
PART NO. FIP x COMP x LENGTH CTN/MSTR
S04353 3/4” x 3/4” x 12” 10/40
S04354
S04355
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
10/40
10/40
PART NO.
J36018
J36022
J36024
J36026
J36030
BOTTOM ID
19”
22”
24”
26”
30”
TOP ID
20 1/2”
22 1/2”
25 1/2”
27 1/2”
31 1/2”
CTN/MSTR
1/20
1/20
1/20
1/10
1/5
PART NO.
FIP x MIP x LENGTH CTN/MSTR
S04356
S04357
S04358
3/4” x 3/4” x 12”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
10/40
10/40
10/40
Galvanized Hot Water Heater Pans
• 24 gauge
• Flared sides
• 1” fitting (J34-800)
PART NO. MIP x COMP xLENGTH CTN/MSTR
S04359
S04360
S04361
3/4” x 3/4” x 12”
3/4” x 3/4” x 18”
3/4” x 3/4” x 24”
10/40
10/50
10/50
Water Heater Stand
• Galvanized
• Snap-in legs
• Easy to assemble
• Rating approval at 2,000 lbs. static weight
PART NO. DESCRIPTION
J37022
J37024
22” x 22” x 4”
24” x 24” x 4”
J37026
J37028
J37030
26” x 26” x 4”
28” x 28” x 4”
30” x 30” x 4”
Water Heater Pan
CTN QTY
1
1
1
1
1
PART NO. DESCRIPTION
J36200 18” square x 17” high water heater stand
Water Heater Stand
• No assembly required
• 3/4 tubular steel construction
• Non-rust paint
• 800 lbs. static weight
CTN/MSTR
1/4
CORNERS
FOLDED FOR
STRENGTH
Seamless Galvanized Corner
• Seamless galvanized water heater pans are holded not welded
• 1” drain connector included
(J34-800)
• One piece stamped aluminum
.032 mil (20 gauge)
• Aluminum pans comply with
SBCCI, sec. 1213.7
PART NO. DESCRIPTION
J36300
J36250
25 1/2” x 17” high water heater stand
28” x 17” high water heater stand
Stand-rite Water Heater Stand
• Lab tested
• Meets UPC requirements
• Heavy duty
• Corrosion resistant
• 14 gauge galvanized steel
• Top 21.5” x 21.5”
• Rated up to 650 pounds
• For water heaters up to 65 gallons
• Includes mounting clips for securing to wall/floor
• Quick assembly
PART NO. DESCRIPTION
J36400 Water heater stand
CTN QTY
1
1
CTN QTY
1
Round Aluminum
PART NO. DESCRIPTION
J38020
J38022
20” round water heater pan
22” round water heater pan
J38024
J38026
J38030
24” round water heater pan
26” round water heater pan
30” round water heater pan
Seamless Galvanized
PART NO. DESCRIPTION
J39019
J39023
19” seamless water heater pan
23” seamless water heater pan
J39027
J39030
27” seamless water heater pan
30” seamless water heater pan
Water Heater Pan Adapter
• 1” PVC
• Washer and locknut
• Fits all Jones Stephens pans
CTN/MSTR
1/10
1/10
1/10
1/10
1/5
CTN QTY
1
1
1
1
110
PART NO. DESCRIPTION
J34800 1” Adapter
CTN/MSTR
1/25
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
Jones Stephens Corp. • PlumBest™ • LTConnections™
Run-Off Tube
• UL listed
• For water heaters
• Electroplated fittings
• 230°F temperature rating
• Hand tighten to T and P valve
PART NO. DESCRIPTION
J34975 3/4” NPT x 60” side mount
J34980
J34970
3/4” NPT top mount
3/4” NPT x 60” side mount
CTN/MSTR
1/100
1/25
1/15
Pressure Gauge
2” Face
PART NO.
G60015
G60030
G60060
G60100
Pressure Gauges
• 1/4” MIP brass lower connection
• Applicable with air, water, oil and gas - anything which does not attack brass
• Not for use on oxygen service
• Individually boxed
• Steel case
• Shatterproof face
• Class 2.5-2% accuracy
PRESSURE RATING
15 PSI
30 PSI
60 PSI
100 PSI
CTN/MSTR
1/100
1/100
1/100
1/100
C
Gas Testing Equipment
• Large 4” face
• Class 1A gauge
• 5 lb. gas test gauge/15 lb. gas test gauge
• 1/10 # increments
• Inches of mercury scale
• External set hand
• Bellows design
• 1/4 NPT connection
• Gauge meets all requirements of the City of Houston code
Word 94-108, Section 1204.3.2, revised January 18, 2001
• ALL SALES FINAL; NO WARRANTY; NO RETURN
PART NO. DESCRIPTION
G60055 15 lb. gas test gauge only
G65055 15 lb. gauge, body and valve-complete
G60005 5 lb. gas test gauge only
G64055 5 lb. gauge, body and valve-complete
CTN/MSTR
1/20
1/20
1/20
1/20
2 1/2” Face Liquid Filled Pressure
Gauge
• +/- 1.5% accuracy
• Glycerin filled for use where vibration or pressure pulsation occur
• -50 to 150°F operating temperature
• 1/4” NPT bottom connection
• Polished 304 stainless steel case with vent plug
G60160
G60200
G60300
2 1/2” Face
PART NO.
G61015
G61030
G61060
G61100
G61160
G61200
G61300
3 1/2” Face
PART NO.
G62030
G62060
G62100
G62200
G62300
Pigtail Syphon
160 PSI
200 PSI
300 PSI
PRESSURE RATING
15 PSI
30 PSI
60 PSI
100 PSI
160 PSI
200 PSI
300 PSI
PRESSURE RATING
30 PSI
60 PSI
100 PSI
200 PSI
300 PSI
1/100
1/100
1/100
CTN/MSTR
1/100
1/60
1/100
1/100
1/100
1/100
1/100
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
• For use with gauges on steam line
• 1/4” MPT x 1/4” MPT
• Steel construction
G60001
PART NO. DESCRIPTION
J40553 0-30 PSI
J40554
J40555
J40556
0-60 PSI
0-100 PSI
0-200 PSI
J40557 0-300 PSI
CTN/MSTR
1/50
1/50
1/50
1/50
1/50
G60000
PART NO. DESCRIPTION
G60000 Straight
G60001 90° Angle
Water Test Gauge
• Individually boxed
• 3/4” brass hose connection
• Steel case with 2 1/2” shatterproof face
CTN/MSTR
20/200
10/200
PART NO. DESCRIPTION
J66300
J66301
300 PSI
300 PSI with indicator
CTN/MSTR
1/50
1/50
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
111
Pressure Gauges
Jones Stephens Corp. • PlumBest™ • LTConnections™
Sillcock/Water or Gas Test Gauge
Assembly
• Brass air valve
• Individually boxed
• Adapts to 3/4” male garden hose or 3/4” MIP
• Comes with garden hose adapter
• Steel case with 2” shatterproof face
Gas Test Gauge Assembly
• Adapts to 3/4” MPT
• Steel case with 2” shatterproof face
• Plated body with 3/4” FIP inlet
• Brass air valve
• Individually boxed
PART NO. DESCRIPTION CTN/MSTR
C PART NO. DESCRIPTION
G64101 200 PSI
5 Pound Gas Test Gauge
• 1/4” NPT
• 2 1/2” diaphragm
• 1/10 # increments
• For building code inspection
PART NO. DESCRIPTION
G61005 5 lb. gas test gauge
Gas Test Gauge
• 2” steel case gauge on 15 lb.
• 5 lb. is marked in 1/10 lb. increments
• 15 lbs. is marked in 1/10 lb. increments
• Plated body with 3/4” FIP inlet
• 2 1/2” diaphragm on 5 lb.
• Adapts to 3/4” MPT
• Brass air valve
• Individually boxed
PART NO. DESCRIPTION
G64015 15 lb. gas test gauge assembly
G64005 5 lb. gas test gauge assembly
CTN/MSTR
1/50
CTN/MSTR
1/100
CTN/MSTR
1/50
1/50
G64030
G64060
30 PSI
60 PSI
G64100 100 PSI
G64160 160 PSI
G64200 200 PSI
G64333 300 PSI
G64000 1/4” air valve and cap
G64001 Gas test body only
G64002 1/8” air valve and cap
G64020 Gas test body and air valve assembly
Tridicator
1/50
1/50
1/50
1/50
1/50
1/50
50/300
1/100
500/1000
1/100
• 0-55 PSI
• 70°F to 250°F temperature range
PART NO. DESCRIPTION
J40550
J40551
2 1/2” face angle 2 1/4” stem (1/4” NPT)
2 1/2” face angle 2 1/2” stem (1/4” NPT)
J40558
J40560
2 1/2” face angle 1” stem (1/4” NPT)
3 1/2” face angle 2 3/4” stem (1/2” NPT)
CTN/MSTR
1/50
1/50
1/50
1/50
Test Gauge Assembly
Bell Type
Vacuum Gauge
• 1/4” brass lower connection
• -30 to 0 inch Hg
• Black steel case with bronze internals
PART NO. DESCRIPTION
G66015 13# x 3/4” FIP
G66030
G66060
30# x 3/4” FIP
60# x 3/4” FIP
G66100 100# x 3/4” FIP
G67015 15# x 1” FIP
G67030
G67060
30# x 1” FIP
60# x 1” FIP
G67100 100# x 1” FIP
G66000 3/4” Bell body (less air valve)
G66002 3/4” Bell body (with air valve)
CTN/MSTR
1/50
1/50
1/50
1/24
1/50
1/50
1/50
1/100
1/100
1/100
G67000 1” Bell body (less air valve)
G67002 1” Bell body (with air valve)
Gas Test Assembly
1/59
1/80
• 4” face and pressure snubber
• Regulates air to an even flow
• Over pressurization will void the warranty
• Protects the diaphragm from compressed air damage
• Class 1A gauge
PART NO. DESCRIPTION
G64155 5 lb. Test Assembly
G65155 15 lb. Test Assembly
CTN QTY
1
1
112
PART NO. DESCRIPTION
G63001 Vacuum gauge (2” face)
Pressure Snubber
• Use on lines with noticeable pressure changes/oscillations
• Bronze body and core
• 1000 PSI maximum
PART NO. DESCRIPTION
G64300 1/4” NPT for air or gas
G64301 1/4” NPT for oil, steam or water
CTN/MSTR
1/100
CTN/MSTR
1/700
1/200
Needle Valve for Pressure Gauge
• 1/4” NPT
• Brass body, seat, stem and handle
• 300°F maximum temperature
• Female x female
• Teflon packing
• 2000 PSI
PART NO. DESCRIPTION
G64004 1/4” needle valve
CTN/MSTR
1/125
Toll Free Phone 1-800-35-JONES (355-6637) • Toll Free Fax 1-800-462-6991 • Website www.plumbest.com
advertisement