Wiring. ASA Electronics JHD910
Add to My manuals16 Pages
ASA Electronics JHD910 is a versatile AM/FM/WB receiver that offers a wide range of features for a variety of applications. With its waterproof and corrosion-resistant design, it's perfect for use in marine, powersports, or any other outdoor environment. The JHD910 boasts 30 programmable presets, allowing you to easily store and access your favorite stations. It also features a 7-channel NOAA weather band with weather alert, so you can stay informed and prepared for changing weather conditions.
advertisement
JHD910
WIRING
The wiring diagram depicts the wiring connections required for proper operation of the unit.
Antenna Connector
(Black Wire)
3.5mm STEREO JACK 3.5mm HEADPHONE
OUTPUT
9-Pin Connector
(Male)
Black Wire
3A FUSE
Left Speaker +
(White)
Left Speaker -
(White/Black)
Ground
(Black)
Accessory
(Red)
Note: Do not connect the red wire to a constant power connection. It should be connected to a vehicle connection with switched power, such as IGN or ACC.
Right Speaker +
(Gray)
Right Speaker -
(Gray/Black)
WASHER
NUT
RUBBER CAP
VEHICLE PANEL
OR HEADPHONE
MOUNTING BRACKET
5
advertisement