- Computers & electronics
- Audio & home theatre
- Supplementary music equipment
- Shure
- SCM820 Digital IntelliMix
- User Guide
advertisement
32
IP Ports and Protocols
2202
5353
5568
8023
8180*
8181*
8427
64000
21
22
23
68
80*
427
443
161
162
843*
Shure Control
Port TCP/UDP tcp tcp udp tcp tcp udp udp tcp tcp tcp tcp tcp tcp tcp tcp udp tcp tcp/udp
Protocol
FTP
SSH
Telnet
DHCP
HTTP
SLP
HTTPS
SNMP
SNMP
Flash
ASCII mDNS
SDT
Telnet
Flash
Flash
Multcast SLP
Telnet
Description Factory Default
Required for firmware updates (otherwise closed) Closed
Not supported Closed
Standard console interface
Dynamic Host Configuration Protocol
Required to launch embedded web server
Required for inter-device communication
Closed
Open
Open
Open
Not supported
Not supported
Not supported
Required for web GUI
Closed
Closed
Closed
Open
Required for 3rd party control strings
Required for device discovery
Required for inter-device communication
Debug console interface
Required for web GUI
Required for web GUI
Required for inter-device communication
Required for Shure firmware update
Open
Open
Open
Password
Open
Open
Open
Open
Dante Audio & Controller
162
[319-320]*
4321, 14336-14600
[4440, 4444, 4455]*
5353
[8700-8706, 8800]*
8751
16000-65536
Port TCP/UDP
SNMP
PTP
Dante
Dante mDNS
Dante
Dante
Dante
Protocol udp udp udp udp udp udp udp udp
*These ports must be open on the PC or control system to access the device through a firewall
Description
Used by Dante
Dante clocking
Dante audio
Dante audio routing
Used by Dante
Dante Control and Monitoring
Dante Controller
Used by Dante
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Table of Contents
- 4 Overview
- 4 IntelliMix® Operating Principles
- 4 Mixer Modes
- 4 Dual Mixer Operation
- 4 DFR and Audio Processing
- 4 Networking
- 4 Model Variations
- 5 SCM820 Description
- 5 Front Panel
- 6 Rear Panel
- 7 Signal Path Diagram
- 8 Operating the Mixer
- 8 Front Panel Modes
- 8 Audio Mute and Bypass
- 8 Monitoring
- 9 The SCM820 Graphical User Interface
- 9 Graphical User Interface (GUI)
- 9 Accessing the GUI
- 10 Installation
- 10 Rackmounting
- 10 Power
- 10 Typical Audio Connections
- 10 Furnished Accessories
- 11 Configuring the Inputs and Outputs
- 12 Setting IntelliMix
- 12 Mixer Mode Descriptions
- 13 IntelliMix Parameters
- 13 Selecting the Mixer Mode
- 13 Single or Dual Mixer Operation
- 14 Networking
- 14 Network Overview
- 14 Digital Audio Networking
- 16 Dante Software by Audinate
- 16 Dante Controller
- 16 Dante Virtual Soundcard
- 17 Application Examples
- 17 Creating a Link Group
- 17 Integrating with Other Systems
- 17 Configuring for Use with a Choir
- 18 Internet Calling
- 18 Logic
- 19 Digital Feedback Reduction (DFR)
- 19 Function
- 19 Basic DFR Setup
- 20 Assigning DFR
- 20 Filter Types
- 20 Filter Width
- 21 GUI Description
- 21 Navigation Bar
- 22 Input Tab
- 23 Intellimix Tab
- 25 Digital Feedback Reduction (DFR) Tab
- 26 Output Tab
- 27 Link Group Tab
- 28 Preferences Tab
- 30 Log On Page
- 31 Troubleshooting
- 32 Event Log
- 32 Front-Panel Error Messages
- 33 Specifications
- 33 Analog Connections
- 33 Digital Signal Processing
- 33 Networking
- 34 IP Ports and Protocols
- 35 Connector Diagrams