3PAR_TPDiSCSI.mof. HP API

"system.")] class TPD_FCPortEthernetPortDependency : CIM_HostedDependency

{

[Override ( "Antecedent" ), Description (

"The underlying EthernetPort, which is depended upon.")]

TPD_EthernetPort REF Antecedent;

[Override ( "Dependent" ), Description (

"The FCPort dependent on the EthernetPort.")]

TPD_FCPort REF Dependent;

};

3PAR_TPDiSCSI.mof

//%////////////////////////////////////////////////////////////////////////

//

//

// Copyright 2011 HP 3PAR, Inc. All Rights Reserved.

// This software is the property of HP 3PAR, Inc. Distribution

// or deployment of the source or derived binaries of this

// software are not permitted.

//

//

//%////////////////////////////////////////////////////////////////////////

///////////////////////////////////////////////////////////////////////////

//

// File : HP 3PAR_TPDiSCSI.mof

//

// Purpose : This MOF contains HP 3PAR iSCSI classes that will be loaded

// into root/tpd namespace.

//

// Date created: 1/31/2006

//

///////////////////////////////////////////////////////////////////////////

// ==================================================================

// HP 3PAR iSCSIController

// ==================================================================

[Description (

"iSCSIController is a type of SCSIProtocolController, "

"managing an iSCSI interface.")] class TPD_iSCSIController : CIM_SCSIProtocolController {

};

[Description (

"The iSCSI Node represents a single iSCSI Target. "

"There are one or more iSCSI Nodes within a Network "

"Entity. The iSCSI Node is accessible via one or more "

"Network Portals. An iSCSI Node is identified by its iSCSI "

"Name.")] class TPD_iSCSINode : CIM_SCSIProtocolController {

};

// ==================================================================

// HP 3PAR iSCSIProtocolEndpoint

// ================================================================== class TPD_iSCSIProtocolEndpoint : CIM_iSCSIProtocolEndpoint {

};

// ==================================================================

3PAR_TPDiSCSI.mof

291

// HP 3PAR BindsToTCPEndpoint

// ==================================================================

[Association, Description (

"This association makes explicit the dependency of a "

"iSCSIProtocolEndpoint on an underlying TCPProtocolEndpoint, on the same "

"system.")] class TPD_BindsToTCPEndpoint : CIM_BindsTo {

[Override ( "Antecedent" ), Description (

"The underlying TCPProtocolEndpoint, which is depended upon.")]

TPD_TCPProtocolEndpoint REF Antecedent;

[Override ( "Dependent" ), Description (

"The iSCSIProtocolEndpoint dependent on the TCPProtocolEndpoint.")]

TPD_iSCSIProtocolEndpoint REF Dependent;

};

// ==================================================================

// HP 3PAR SystemiSCSIEndpoint: association between NodeSystem and

// iSCSIProtocolEndpoint

// ==================================================================

[Association, Description (

"HP 3PAR NodeSystem and IPProtocolEndpoint association."

"This is a subclass of CIM_HostedAccessPoint. There are many "

"subclasses of CIM_HostedAcessPoint in the system. This class is "

" named TPD_SystemIPEndpoint to distinguish with other subclasses. ")] class TPD_SystemiSCSIEndpoint : CIM_HostedAccessPoint

{

// Indicate that this is one-to-many association

[Override ( "Antecedent" ), Min ( 1 ), Max ( 1 ), Description (

"The node controller that hosted the protocol endpoint.")]

TPD_NodeSystem REF Antecedent;

[Override ( "Dependent" ), Weak, Description (

"The iSCSIProtocolEndpoint representing ethernet port "

"on the system.")]

TPD_iSCSIProtocolEndpoint REF Dependent;

};

// ===================================================================

// HP 3PAR iSCSISAPImplementation

// ===================================================================

[Association, Description (

"An association between a ServiceAccessPoint and how it is "

"implemented.")] class TPD_iSCSISAPImplementation : CIM_DeviceSAPImplementation {

[Override ( "Antecedent" ), Description (

"The Ethernet Port.")]

TPD_EthernetPort REF Antecedent;

[Override ( "Dependent" ), Description (

"The iSCSI Protocol Endpoint implemented using the Ethernet Port.")]

TPD_iSCSIProtocolEndpoint REF Dependent;

};

// ==================================================================

// iSCSI Protocol Controller AssociatedPrivilege

// ==================================================================

[Association, Description (

"AssociatedPrivilege represents the access permission "

"that a StorageHardwareID is allowed on a "

"iSCSIProtocolController.")] class TPD_iSPCAssociatedPrivilege : CIM_AssociatedPrivilege {

[Override ( "Subject" ), Description (

"The StorageHardwareID for which privileges are granted.")]

292 Managed Object Format Files

TPD_StorageHardwareID REF Subject;

[Override ( "Target" ), Description (

"The iSCSIProtocolController for which the privileges"

"apply.")]

TPD_iSCSIController REF Target;

};

// ==================================================================

// HP 3PAR PrivilegeForiSCSIController

// ==================================================================

[Association, Description (

"PrivilegeForiSCSIController is an association used to tie the "

"AuthorizedPrivileges to iSCSIController resources.")] class TPD_PrivilegeForiSCSIController : CIM_AuthorizedTarget {

[Override ( "Privilege" ), Description (

"The AuthorizedPrivilege affecting the iSCSIProtocolController "

"resource.")]

TPD_AuthorizedPrivilege REF Privilege;

[Override ( "TargetElement" ), Description (

"The iSCSIProtocolController resources to which the "

"AuthorizedPrivilege applies.")]

TPD_iSCSIController REF TargetElement;

};

// ==================================================================

// HP 3PAR ConfigServicesForiSCSIController Association

// ==================================================================

[Association,

Description (

"TPD_ConfigServicesForiSCSIController is an association between "

"TPD_iSCSIController and ControllerConfigurationService.") ] class TPD_ConfigServicesForiSCSIController : CIM_ConcreteDependency

{

[Override ( "Antecedent" ), Description (

"The controller configuration service which the protocol "

"controller depends on for configuration.")]

TPD_ControllerConfigurationService REF Antecedent;

[Override ( "Dependent" ), Description (

"The iSCSI protocol controller which uses the controller "

"configuration service.")]

TPD_iSCSIController REF Dependent;

};

// ==================================================================

// HP 3PAR iSCSI Protocol Controller And StorageVolume association

// ==================================================================

[Association,

Description (

"HP 3PAR iSCSI protocol controller and storage volume "

"association. ")] class TPD_iSCSIControllerForUnit : CIM_ProtocolControllerForUnit

{

[Override ("Antecedent"),

Description ("The iSCSI Protocol Controller.") ]

TPD_iSCSIController REF Antecedent;

[Override ("Dependent"), Weak, Description (

"The storage volume controlled by the iSCSI protocol controller.") ]

TPD_StorageVolume REF Dependent;

};

// ==================================================================

3PAR_TPDiSCSI.mof 293

// HP 3PAR iSCSISessionSettings

// ==================================================================

[Description (

"The default negotiation settings for an iSCSI Session. These "

"properties are used as the starting position for login "

"negotiations between initiator and target nodes. The "

"properties describing the resulting outcome of the login "

"negotiation are in the iSCSISession class.")] class TPD_iSCSISessionSettings : CIM_iSCSISessionSettings {

};

// ==================================================================

// HP 3PAR iSCSISessionEndpointSetting

// ==================================================================

[Association, Description (

"ElementSettingData represents the association between "

"ManagedElements and applicable setting data. This association "

"also describes whether this is a default or current setting.")] class TPD_iSCSISessionEndpointSetting : CIM_ElementSettingData {

[Override ( "ManagedElement" ), Description (

"The managed element.")]

TPD_iSCSIProtocolEndpoint REF ManagedElement;

[Override ( "SettingData" ), Description (

"The SettingData object associated with the element.")]

TPD_iSCSISessionSettings REF SettingData;

};

// ==================================================================

// HP 3PAR iSCSISessionNodeSetting

// ==================================================================

[Association, Description (

"ElementSettingData represents the association between "

"ManagedElements and applicable setting data. This association "

"also describes whether this is a default or current setting.")] class TPD_iSCSISessionNodeSetting : CIM_ElementSettingData {

[Override ( "ManagedElement" ), Description (

"The managed element.")]

TPD_iSCSINode REF ManagedElement;

[Override ( "SettingData" ), Description (

"The SettingData object associated with the element.")]

TPD_iSCSISessionSettings REF SettingData;

};

// ==================================================================

// HP 3PAR iSCSISessionSystemSetting

// ==================================================================

[Association, Description (

"ElementSettingData represents the association between "

"ManagedElements and applicable setting data. This association "

"also describes whether this is a default or current setting.")] class TPD_iSCSISessionSystemSetting : CIM_ElementSettingData {

[Override ( "ManagedElement" ), Description (

"The managed element.")]

TPD_StorageSystem REF ManagedElement;

[Override ( "SettingData" ), Description (

"The SettingData object associated with the element.")]

TPD_iSCSISessionSettings REF SettingData;

};

294 Managed Object Format Files

// ==================================================================

// HP 3PAR iSCSIConnectionSettings

// ==================================================================

[Description (

"The settings for the usage of an iSCSI NetworkPortal by an "

"iSCSIProtcolEndpoint. These settings are the starting point "

"for negotiation for connection establishment. "

"The properties that reflect the actual outcome "

"of the negotiation are found in the iSCSIConnection class.")] class TPD_iSCSIConnectionSettings : CIM_iSCSIConnectionSettings {

};

// ==================================================================

// HP 3PAR iSCSIConnectionTCPSetting

// ==================================================================

[Association, Description (

"ElementSettingData represents the association between "

"ManagedElements and applicable setting data. This association "

"also describes whether this is a default or current setting.")] class TPD_iSCSIConnectionTCPSetting : CIM_ElementSettingData {

[Override ( "ManagedElement" ), Description (

"The managed element.")]

TPD_TCPProtocolEndpoint REF ManagedElement;

[Override ( "SettingData" ), Description (

"The SettingData object associated with the element.")]

TPD_iSCSIConnectionSettings REF SettingData;

};

// ==================================================================

// HP 3PAR iSCSIConnectionSettingEndpoint

// ==================================================================

[Association, Description (

"ElementSettingData represents the association between "

"ManagedElements and applicable setting data. This association "

"also describes whether this is a default or current setting.")] class TPD_iSCSIConnectionSettingEndpoint : CIM_ElementSettingData {

[Override ( "ManagedElement" ), Description (

"The managed element.")]

TPD_iSCSIProtocolEndpoint REF ManagedElement;

[Override ( "SettingData" ), Description (

"The SettingData object associated with the element.")]

TPD_iSCSIConnectionSettings REF SettingData;

};

// ==================================================================

// HP 3PAR iSCSISession

// ==================================================================

[Description (

"iSCSISession is a network pipe between an initiator and target "

"SCSIProtocolEndpoints. An iSCSISession is composed of one or "

"more TCP connections which MUST be selected from a "

"SystemSpecificCollection representing an iSCSI Portal Group. "

"NetworkPipeComposition aggregates NetworkPipe instances "

"representing iSCSI connections, which are associated to "

"TCPProtocolEndpoints. Only an iSCSI initiator can create an "

"iSCSI Session, an iSCSI Target MUST accept (or reject) a "

"session request. EndOfNetworkPipe associates iSCSISession with "

"SCSIProtocolEndpoint.")] class TPD_iSCSISession : CIM_iSCSISession {

};

3PAR_TPDiSCSI.mof 295

// ==================================================================

// HP 3PAR EndpointOfiSCSISession

// ==================================================================

[Association, Description (

"EndpointOfNetworkPipe describes the endpoints between which a "

"pipe transfers information. Whether an endpoint is a source or "

"sink is indicated by a property of the association, "

"SourceOrSink.")] class TPD_EndpointOfiSCSISession : CIM_EndpointOfNetworkPipe {

[Override ( "Antecedent" ), Min ( 2 ), Max ( 2 ), Description (

"One of the endpoints of the pipe.")]

TPD_iSCSIProtocolEndpoint REF Antecedent;

[Override ( "Dependent" ), Description (

"The pipe which is dependent on the endpoints as the source "

"or sink of the transferred information.")]

TPD_iSCSISession REF Dependent;

};

// ==================================================================

// HP 3PAR iSCSIConnection

// ==================================================================

[Description (

"This class contains the attributes of and negotiated values "

"for, an iSCSI Connection which is modeled as a subclass of "

"NetworkPipe. The original settings that are a starting point "

"for negotiation are found in the class "

"iSCSIConnectionSettings.")] class TPD_iSCSIConnection : CIM_iSCSIConnection {

};

// ==================================================================

// HP 3PAR EndpointOfiSCSIConnection

// ==================================================================

[Association, Description (

"EndpointOfNetworkPipe describes the endpoints between which a "

"pipe transfers information. Whether an endpoint is a source or "

"sink is indicated by a property of the association, "

"SourceOrSink.")] class TPD_EndpointOfiSCSIConnection : CIM_EndpointOfNetworkPipe {

[Override ( "Antecedent" ), Min ( 2 ), Max ( 2 ), Description (

"One of the endpoints of the pipe.")]

TPD_TCPProtocolEndpoint REF Antecedent;

[Override ( "Dependent" ), Description (

"The pipe which is dependent on the endpoints as the source "

"or sink of the transferred information.")]

TPD_iSCSIConnection REF Dependent;

};

// ==================================================================

// HP 3PAR iSCSIPipeComposition

// ==================================================================

[Association, Aggregation, Composition, Description (

"NetworkPipeComposition describes the makeup a pipe, based on "

"lower-level ones. If the pipe is not composed of lower-level "

"entities (i.e., its AggregationBehavior property is set to 2), "

"then no instances of this association should be defined where "

"the pipe has the role of GroupComponent.")] class TPD_iSCSIPipeComposition : CIM_NetworkPipeComposition {

[Aggregate, Override ( "GroupComponent" ), Description (

296 Managed Object Format Files

"The higher level pipe that is composed of lower-level "

"parts/pipes.")]

TPD_iSCSISession REF GroupComponent;

[Override ( "PartComponent" ), Description (

"A pipe which is a part of a higher-level one.")]

TPD_iSCSIConnection REF PartComponent;

};

// ==================================================================

// HP 3PAR iSCSISessionStatistics

// ==================================================================

[Description (

"Traffic and error statistics for an iSCSI Session. An instance "

"of this class will be associated by ElementStatisticalData to "

"the instance of iSCSISession.")] class TPD_iSCSISessionStatistics : CIM_iSCSISessionStatistics {

};

// ==================================================================

// HP 3PAR iSCSISessionStatisticalData

// ==================================================================

[Association, Description (

"CIM_ElementStatisticalData is an association that relates a "

"ManagedElement to its StatisticalData. Note that the "

"cardinality of the ManagedElement reference is Min(1), Max(1). "

"This cardinality mandates the instantiation of the "

"ElementStatisticalData association for the referenced instance "

"of CIM_StatisticalData. ElementStatisticalData describes the "

"existence requirements and context for the "

"CIM_StatisticalData, relative to a specific ManagedElement.")] class TPD_iSCSISessionStatisticalData : CIM_ElementStatisticalData {

[Key, Min ( 1 ), Max ( 1 ), Description (

"The ManagedElement for which statistical or metric data is "

"defined.")]

TPD_iSCSISession REF ManagedElement;

[Key, Description (

"The statistic information/object.")]

TPD_iSCSISessionStatistics REF Stats;

};

// ==================================================================

// HP 3PAR iSCSICapabilities

// ==================================================================

[Description (

"The capabilites for an iSCSI Network Entity. An instance of "

"this class will be associated by ElementCapabilities to a "

"instance of ComputerSystem that represents the Network Entity. "

"These capability properties are associated to a Network "

"Entity/ComputerSystem since they affect all login negotiations "

"on all iSCSI ProtocolEndpoints aggregated to the system.")] class TPD_iSCSICapabilities : CIM_iSCSICapabilities {

};

// ==================================================================

// HP 3PAR iSCSIElementCapabilities

// ==================================================================

[Association, Description (

"ElementCapabilities represents the association between "

"ManagedElements and their Capabilities. Note that the "

"cardinality of the ManagedElement reference is Min(1), Max(1). "

"This cardinality mandates the instantiation of the "

"ElementCapabilities association for the referenced instance of "

3PAR_TPDiSCSI.mof 297

"Capabilities. ElementCapabilities describes the existence "

"requirements and context for the referenced instance of "

"ManagedElement. Specifically, the ManagedElement MUST exist "

"and provides the context for the Capabilities.")] class TPD_iSCSIElementCapabilities : CIM_ElementCapabilities {

[Key, Min ( 1 ), Max ( 1 ), Description (

"The managed element.")]

TPD_StorageSystem REF ManagedElement;

[Key, Description (

"The Capabilities object associated with the element.")]

TPD_iSCSICapabilities REF Capabilities;

};

// ==================================================================

// HP 3PAR iSCSISAPAvailableForElement

// ==================================================================

[Association, Description (

"CIM_SAPAvailableForElement conveys the semantics of a Service "

"Access Point that is available for a ManagedElement. When "

"CIM_SAPAvailableForElement is not instantiated, then the SAP "

"is assumed to be generally available. If instantiated, the SAP "

"is available only for the associated ManagedElements. For "

"example, a device might provide management access through a "

"URL. This association allows the URL to be advertised for the "

"device.")] class TPD_iSCSISAPAvailableForElement : CIM_SAPAvailableForElement {

[Key, Description (

"The Service Access Point that is available.")]

TPD_iSCSIProtocolEndpoint REF AvailableSAP;

[Key, Description (

"The ManagedElement for which the SAP is available.")]

CIM_SCSIProtocolController REF ManagedElement;

};

// ==================================================================

// HP 3PAR NodeSystem and iSCSIController association

// ==================================================================

[Association, Aggregation, Composition,

Description (

"HP 3PAR Storage System and iSCSI Controller Association ") ] class TPD_SystemiSCSIController : CIM_SystemDevice

{

[Override ("GroupComponent"), Aggregate, Max (1), Min (1), Description(

"The storage system or node controller that hosted the iSCSI Controller or iSCSI

node.")]

CIM_ComputerSystem REF GroupComponent;

[Override ("PartComponent"), Weak, Description (

"The iSCSI Controller or iSCSI Node.") ]

CIM_SCSIProtocolController REF PartComponent;

};

// ==================================================================

// HP 3PAR iSCSISessionFailures

// ==================================================================

[Description (

"Failure Statistics for Sessions associated with a iSCSI Node. "

"An instance of this class will be associated by "

"ElementStatisticalData to an instance of "

"SCSIProtocolController representing an iSCSI Node. These "

"statistics are associated to a Node since they describe the "

"aggregated Session data for all failed Sessions associated to "

298 Managed Object Format Files

"iSCSI protocol endpoints used by the Node.")] class TPD_iSCSISessionFailures : CIM_iSCSISessionFailures {

};

// ==================================================================

// HP 3PAR iSCSILoginStatistics

// ==================================================================

[Description (

"Statistics for Logins and Logouts to or from an iSCSI Node. An "

"instance of this class will be associated by "

"ElementStatisticalData to an instance of "

"SCSIProtocolController that represents the Node. The Node can "

"be either an Initiator or Target and so the interpretation of "

"the properties in this class varies accordingly.")] class TPD_iSCSILoginStatistics : CIM_iSCSILoginStatistics {

};

// ==================================================================

// HP 3PAR iSCSISessionFailuresData

// ==================================================================

[Association, Description (

"CIM_ElementStatisticalData is an association that relates a "

"ManagedElement to its StatisticalData. Note that the "

"cardinality of the ManagedElement reference is Min(1), Max(1). "

"This cardinality mandates the instantiation of the "

"ElementStatisticalData association for the referenced instance "

"of CIM_StatisticalData. ElementStatisticalData describes the "

"existence requirements and context for the "

"CIM_StatisticalData, relative to a specific ManagedElement.")] class TPD_iSCSISessionFailuresData : CIM_ElementStatisticalData {

[Key, Min ( 1 ), Max ( 1 ), Description (

"The ManagedElement for which statistical or metric data is "

"defined.")]

TPD_iSCSINode REF ManagedElement;

[Key, Description (

"The statistic information/object.")]

TPD_iSCSISessionFailures REF Stats;

};

// ==================================================================

// HP 3PAR iSCSILoginStatisticsData

// ==================================================================

[Association, Description (

"CIM_ElementStatisticalData is an association that relates a "

"ManagedElement to its StatisticalData. Note that the "

"cardinality of the ManagedElement reference is Min(1), Max(1). "

"This cardinality mandates the instantiation of the "

"ElementStatisticalData association for the referenced instance "

"of CIM_StatisticalData. ElementStatisticalData describes the "

"existence requirements and context for the "

"CIM_StatisticalData, relative to a specific ManagedElement.")] class TPD_iSCSILoginStatisticsData : CIM_ElementStatisticalData {

[Key, Min ( 1 ), Max ( 1 ), Description (

"The ManagedElement for which statistical or metric data is "

"defined.")]

TPD_iSCSINode REF ManagedElement;

[Key, Description (

"The statistic information/object.")]

3PAR_TPDiSCSI.mof 299