Programming Mode. JLCooper eBOX

blank. Otherwise, you might start your tape machines playing while browsing in Safari :)

Keysets, and any changes you make to them, are stored automatically in the eBox's preference file. There is no need to

Save or Open on a regular basis. If you want to make a copy of your work for backup or to move to another Mac, use Open

Archive and Save As Archive in the File menu. These commands store and retrieve all of your keysets in a single file.

Programming Mode

In programming mode, you click on a button, and its information appears in the

Inspector window. Here, you can give the control a name and a set of actions to perform when it is clicked.

You set up an action in one of the tabs (for example, GPI, MIDI,

Special, Delay) then click on Add Action. You can keep adding as many actions as you want. They will be performed in order when the button is pressed in Live Mode.

31