advertisement
▼
Scroll to page 2
of
104
7.2.
Manual Response Adjustment
1 Press and hold the MODE key until RESPONSE is displayed, then release the key.
Press the MODE key again quickly.
2 Select a setting for the response adjustment using the
MODE key. Either FAST , MID. or SLOW can be selected.
3 The balance displays 1 end 1 , returns to the weighing mode and displays the updated response indicator for about thirty seconds.
Advise
If the automatic response adjustment is not helpful, specify a parameter for "Condition ( Cond ) " of
"Environment, Display ( ba5fnc )" with key operation.
Press and hold
Release and press again immediately
Select a parameter
Release and wait
Result
34 BM series
advertisement
Related manuals
advertisement
Table of contents
- 5 Introduction
- 6 Features
- 7 Compliance
- 9 Unpacking The Balance
- 12 Installing The Balance And Precautions
- 12 Installing The Balance
- 15 Precautions Before Use (Environmental Condition And Preparations)
- 17 Cautions During Use (For Precision Weighing)
- 18 Cautions After Use (Management Of The Balance)
- 18 Cautions For Power Supply
- 19 Display Symbols And Key Operation
- 20 Weighing Units
- 20 Units
- 23 Storing Active Units
- 24 Selecting Unit And Weighing Mode
- 26 Weighing
- 26 Basic Operation (Gram Mode)
- 27 Smart Range For BM
- 28 Counting Mode (PC)
- 30 Percent Mode (%)
- 31 Built-in DC Static Eliminator (Neutralization Device)
- 33 Monitoring Clock and Environmental Sensors
- 34 Repeatability Test
- 35 Response Adjustment
- 35 Automatic Response Adjustment
- 36 Manual Response Adjustment
- 37 Calibration (To Adjust The Weighing Value)
- 37 Calibration Group
- 38 Automatic Self Calibration (For variation of ambient temperature)
- 38 One-Touch Calibration (For Common Use)
- 39 Calibration Test Using the Internal Mass
- 40 Calibration Using An External Weight
- 41 Calibration Test Using An External Weight
- 42 Correcting The Internal Mass Value
- 43 Function Switch And Initialization
- 43 Permit Or Inhibit
- 44 Initializing The Balance
- 45 Function Table
- 45 Setting The Function Table
- 47 Details Of The Function Table
- 49 Description Of The Class "Environment, Display
- 51 Description Of The Item "Data Output Mode
- 52 Description Of The Item "Data Format
- 55 Data Format Examples
- 57 Clock And Calendar Function
- 58 ID Number And GLP Report
- 58 Setting The ID Number
- 59 GLP Report
- 64 Data Memory
- 64 Notes On Using Data Memory
- 65 Data Memory For Weighing Data
- 68 Data Memory For Calibration And Calibration Test
- 69 Underhook
- 70 Density Measurement (Specific gravity)
- 73 Password Function
- 73 Using Password Function
- 74 Changing Password
- 75 Inputting Password When Turning On The Balance
- 75 Missing Password
- 76 Standard Input And Output Interface
- 76 RS-232C Interface
- 77 Connection To Peripheral Equipment
- 80 Commands
- 85 Maintenance
- 85 Treatment Of The Balance
- 85 Error Codes
- 87 Other Display
- 88 Checking The Balance Performance And Environment
- 88 Asking For Repair
- 89 Specifications
- 90 External Dimensions
- 91 Options And Peripheral Equipment
- 96 Terms
- 97 Index