PENTAX Q_ENG.book Page 197 Monday, August 29, 2011 8:43 AM
197
Checking the Camera Version Information
You can check the version information for software (firmware) in the camera. If an update file for the firmware is released, you can update the camera to the latest firmware version.
Refer to the PENTAX website for more information and procedural details regarding updates.
1
Select [Firmware Version Info] in the [R Set-up 3] menu, and press the four-way controller (5).
The firmware versions for the camera and lens are displayed on the [Firmware
Version Info] screen.
If an update file is saved on your SD
Memory Card, you can run the update at a later time.
Camera
Ver:X.XX
Lens
01 STANDARD PRIME
Ver:X.XX
MENU
2
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• You cannot return a camera to its previous firmware version after updating it.
• Before running the update, be sure to save the data on your SD Memory Card to a computer or other location.
• When the battery level is low, [Not enough battery power remaining to update the firmware] is displayed on the monitor. Use the AC adapter kit K-AC115
(optional) or install a fully charged battery.
8
