CCD Hardware. Wasp WASP
Below you will find brief information for bar code reader WASP. The WASP bar code reader is a one touch scanner allowing the user to come in direct contact with the bar code. It also supports a depth of reading of up to 1.4 inches to successfully decode a bar code symbology. Bar codes up to 3.15 inches in length can be scanned. To activate the scanner, the user simply covers the bar code with head of the scanner and pulls the trigger.
Advertisement
Advertisement
Advertisement
Key features
Supports a depth of reading of up to 1.4 inches
Can scan bar codes up to 3.15 inches in length
One touch scanner
Supports a scan rate of 50 scans per second
Supports PC AT/XT and PS/2 keyboard interfaces
Easily wedges between the computer and keyboard
Bar code data is passed directly into the keyboard buffer
Supports most popular bar code symbologies
Frequently asked questions
To configure the WASP CCD, three basic steps need to be followed for each programmed setting: (1) Scan the 'Begin' bar code with the Wasp CCD reader to select your configuration (2) Scan the appropriate setting(s) to customize the CCD configuration (3) Scan the corresponding 'End' bar code with the Wasp CCD reader
The Wasp CCD scanner can read the most popular bar code symbologies including Code 39, Code 128, Interleaved 2 of 5, UPC-A, UPC-E, EAN/JAN-8, EAN/JAN-13, Codabar, MSI Plessey, and Code 93.
To activate the scanner, the user simply covers the bar code with head of the scanner and pulls the trigger.