Rear-discharging the Grass Clippings. Toro DH 220 Lawn Tractor

2. Disengage the blades (PTO) and move the throttle to the Slow position.

3. Pull the grass collector dump lever forward and tilt

the grass collector (Figure 16).

1

G017876

Figure 17

1.

Locking latch

1

Figure 16

1.

Grass collector dump lever

G017877

2. Disengage the blades (PTO) and move the throttle to the Slow position.

3. Pull the grass collector dump lever forward and

tilt the grass collector (Figure 18) until the locking

latch engages to lock the grass collector in the open

position (Figure 19).

4. Empty the grass collector.

5. Before returning the grass collector to the operating position, move the machine forward to clear the grass collector of the deposited grass.

6. Slowly lower the telescoping dump lever to return the grass collector to the operating position.

Rear-discharging the Grass

Clippings

Occasionally, you may need to cut the lawn without the grass collector when the grass is too long for collecting.

1. Disengage the locking latch (Figure 17).

1

Figure 18

1.

Grass collector dump lever

G017877

17