Sophos Mobile Control
9 Configure personal settings
You can configure personal settings for the use of the Sophos Mobile Control web console.
Note: These settings are user-specific. They must be defined separately for each user account.
1. In the web console menu bar, go to Settings and click General.
The General settings view is displayed.
2. In the Personal tab, configure the following settings: a) In the Lines per page in tables field, select the maximum number of table lines you want to display per page in the web console. You can choose between 20 and 100 lines.
b) Under Activated platforms, select the platforms you want to use in the web console:
Android, Blackberry, iOS, Windows Phone 8 and/or Windows Mobile. If you select specific platforms, you can only use the selected platforms with Sophos Mobile Control. All other platforms are hidden. In addition, all modules and functions that are not required for a specific platform are hidden.
c) Select Enable command bundles (expert mode), to enable the Command bundles function.
For further information, see
Work with command bundles
(section 19).
d) Select Enable backup functionality to enable the Backup function. For further information, see
Back up devices
(section 24).
3. Click the Save button.
4. As some changes in the personal settings are only applied after the next login, log out from the web console and log in again.
The new personal settings are applied to your user account.
20
