e_000_kb321.book Page 45 Wednesday, August 27, 2003 12:09 PM
Consecutive Shooting
Pictures can be taken consecutively while the shutter release button is held down.
1
Press the drive mode button [g]
until [j] appears on the LCD panel.
45
4
2
Press the shutter release button halfway down to focus on the subject.
3
Press the shutter release button completely.
Pictures are taken consecutively while the shutter release button is fully pressed. Take your finger off of the shutter release button to stop taking consecutive pictures.
• When the focus mode lever is set to l (single), the focus is locked in the first frame position and used for subsequent continuous frames.
• When the focus mode lever is set to k (continuous), the focus is adjusted for each shot. However, note that the shutter will release even if the focusing is not complete.
• The shutter cannot be released until charging is complete when using the built-in flash. Use a custom function to enable shutter release before the builtin flash is ready. See page 115 for setting Custom Functions.
