PART IDENTIFICATION CHART
Use the drawings below to identify small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. Note: If a part is not in the hardware kit, check to see whether it is preattached. Extra parts may be included.
#10 Star Washer
(5)–4
5/16" Star
Washer (11)–10
3/8" Star
Washer (13)–8
#8 x 5/8" Machine
Screw (26)–4
#8 x 1/2" Ground
Screw (10)–1
#8 x 1/2" Screw
(1)–10
#10 x 3/4" Screw
(9)–4
5/16" x 1/2" Screw
(4) – 4
5/16" x 3/4"
Screw (25)–2
3/8" x 1 1/4" Screw
(63)–2
3/8" x 1 3/4" Screw (62)–2 3/8" x 2 3/8" Screw (7)–4
5/16" x 2 1/2"
Screw (28)–4
6
