Cancelling the delay start after the countdown has started. AEG L8FEE945R

With the flap in the position DOWN:

• Do not use gelatinous or thick liquid detergents.

• Do not put more liquid detergent than the limit shown on the flap.

• Do not set the prewash phase.

• Do not set the delay start function.

5.

Measure out the detergent and the fabric conditioner.

6.

Carefully close the detergent dispenser.

Make sure that the flap does not cause a blockage when you close the drawer.

11.5

Setting a programme

1.

Turn the programme dial to select the desired washing programme. The related programme indicator comes on.

The indicator of the Start/Pause button flashes.

The display shows the maximum declared load for the programme, the default temperature, the maximum spin speed, the washing phase indicators

(when available) and an indicative programme duration.

2.

To change the temperature and/or the spin speed, touch the related buttons.

3.

If desired, set one or more options by touching the related buttons. The related indicators come on in the display and the given information changes accordingly.

ENGLISH 25

In case a selection is not possible , no indicator comes on and an acoustic signal sounds.

11.6

Starting a programme

Touch the Start/Pause button to start the programme.

The related indicator stops flashing and stays on.

In the display, the indicator of the operating phase starts flashing and the maximum load indicator goes off.

The programme starts, the door is locked. The display shows the indicator

.

The drain pump can operate shortly before the appliance fills water.

11.7

Starting a programme with the delay start

1.

Touch the Delay Start button repeatedly until the display shows the desired delay time. The indicator

goes on.

2.

Touch the Start/Pause button.

The appliance starts the countdown of the delay start.

When the countdown is completed, the programme starts.

The PROSENSE estimation starts at the end of the countdown.

Cancelling the delay start after the countdown has started

To cancel the delay start:

1.

Touch the Start/Pause button to pause the appliance. The related indicator flashes.

2.

Touch the Delay Start button repeatedly until the display shows .

3.

Touch the Start/Pause button again to start the programme immediately.