Warranty. GE 24991

Add to My manuals
31 Pages

advertisement

Warranty. GE 24991 | Manualzz

90-Day Limited Warranty

Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase.

This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied warranty lasts or permit the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific rights, and you may also have other rights which vary from state to state. If unit should prove defective within the warranty period, return prepaid with dated proof of purchase to:

Jasco Products Company

10 E. Memorial Rd.

Oklahoma City, OK 73114 www.byjasco.com

MADE IN CHINA

GE is a trademark of General Electric Company and is under license by Jasco Products Company LLC,

10 E. Memorial Rd., Oklahoma City, OK 73114.

This Jasco product comes with a 90-day limited warranty. Visit www.byjasco.com for warranty details.

Questions? Contact us at 1-800-654-8483 between

7:00AM—8:00PM CST.

14

advertisement

Key Features

  • Controls up to 3 devices
  • Preprogrammed for Roku® boxes and Samsung TVs
  • Easy to program using Direct Code Entry or Auto Code Search
  • Red indicator light confirms programming
  • Battery saver feature extends battery life
  • Code saver feature retains codes for up to 10 minutes during battery replacement

Related manuals

Frequently Answers and Questions

How do I program the remote for my device?
You can program the remote using either the Direct Code Entry method or the Auto Code Search method. See the included Code List for specific codes for your device.
What is the red indicator light for?
The red indicator light confirms programming and indicates when the remote is in programming mode.
How do I replace the batteries?
To replace the batteries, pull down on the textured surface and slide the battery cover downward to remove. Match the (+) and (-) marks on the batteries to the (+) and (-) marks inside the battery compartment, then insert two (2) AAA batteries. Be sure to use fresh batteries.