2.3 Operator control
2.3.1 LED Indication, LCD screen, and Keys
For LED version
2
5
1. Power on/off button
2. Feed/Pause button
3. Printer status LED indicator
4. Battery charge level LED indicators
5. Wireless status LED indicator
Keys Function
1. Press and hold for 2-3 seconds to turn on the printer.
2. Press and hold for 2-3 seconds to turn off the printer.
1. Ready status: Feed one label
2. Printing status: Pause the print job
12
3
4
1
LED
Printer status LED indicator
Status
Off
Green (blinking)
Indication
Printer is ready
Printer is paused
Sleep mode/ entered the sleep mode after stop working over 2 minutes
Green (blinking every two seconds)
(The interval can be changed by revising the command, refer to
TSPL/TSPL2 programming manual on
TSC website ).
Red (solid) Media cover is open
Red (blinking)
Amber (blinking)
Printer error
Battery is charging.
Battery status LED indicator
Green (blinking) Battery is charging.
Green (solid)
Wi-Fi/ Bluetooth status LED indicator
Green (blinking)
Green (solid)
Blue (blinking)
Blue (solid)
White (blinking)
White (solid)
Battery is charged.
Wi-Fi device is communicating
Wi-Fi device is ready
Bluetooth device is communicating
Bluetooth device is ready
Bluetooth and Wi-Fi coexist device are communicating
Bluetooth and Wi-Fi coexist device are ready
13
For LCD version
4
2
3
1
1. Power on/off button
2. Feed/Pause button
3. Printer status/Wireless status LED indicator
4. LCD screen (indicates battery status/media type/firmware version/error messages)
Keys Function
1. Press and hold for 2-3 seconds to turn on the printer.
2. Press and hold for 2-3 seconds to turn off the printer.
1. Ready status: Feed one label
2. Printing status: Pause the print job
14
Media type
F/W version
LCD monitor
Bluetooth
BT icon
Battery level
BT MAC address/
Wi-Fi IP address
15
2.3.2 Battery Charging Cycle
1. Charging the battery when the printer turns on .
Fully charged then turn off the printer automatically.
Charging mode
Charging cycle
1. Charging the battery when the printer turns on.
2. Power saving mode
Power saving mode
LED version
Charging level:
0~30%
Charging level:
30~60%
Charging level:60~100%
Charging level:100%
LCD version
1 block blinking
2 blocks blinking
3 blocks blinking
Charging level:
0~25%
Charging level:
25~50%
Charging level:50~75%
Charging level:
75~100%
Charging level:
100%
1. Printer status LED blinks amber light.
2. Push power on/off button when charging the battery, the printer will leave power saving mode.
3. The power saving mode will be ended if the power supply is removed from the printer.
4 blocks blinking
Solid 4 blocks
3. Fully charged then turn off the printer automatically.
Note:
1. Printer status LED blinks amber light when charging the battery.
2. Push power on/off button when charging the battery, the LED lights/ LCD monitor will shows the charging status.
3. After the battery was fully charged and stopped print job for a while, the printer will automatically turn-off.
16
2. Charging the battery when the printer turns off .
LED version Charging cycle
Charging the battery when the printer turns off.
Charging level:
0~30%
Charging level:
30~60%
Charging level:60~100%
Charging level:100%
LCD version
1 block blinking
2 blocks blinking
3 blocks blinking
Charging level:
0~25%
Charging level:
25~50%
Charging level:
50~75%
4 blocks blinking
Charging level:
75~100%
Solid 4 blocks Charging level:
100%
Note:
1. Printer status LED blinks amber light when charging the battery.
2. Push power on/off button when charging the battery, the LED lights/ LCD monitor will shows the charging status.
3. After the battery was fully charged and stopped print job for a while, the printer will automatically turn-off.
3.
Check the smart battery charging capacity on Printer Management
User can use TSC Printer Management utility (TPM) to check battery level and battery life.
17
