Inspecting the Machine. Wacker Neuson BS 50-2, BS 60-2i, BS50-2 EU, BS50-2, BS 70-2i
Add to My manuals56 Pages
advertisement
BS 50-2
5.6
Inspecting the Machine
When
Maintenance
After the first five hours, and every week or every 25 hours thereafter (whichever comes first)
Requirements
Engine stopped
Machine cool to the touch
Replacement parts as needed (refer to the Parts Book)
Procedure 1. Perform a walk-around inspection of the machine. Check for:
Loose or missing fasteners
Cracked, corroded, or missing parts
Damaged controls
CAUTION
Injury hazard.
f Do not operate the machine if any safety devices, guards, controls, or fasteners are loose, missing, or inoperative.
Result
2. Tighten loose fasteners. Replace missing fasteners as needed.
3. Replace damaged or missing parts. Use only Wacker Neuson replacement parts or those parts equivalent to the original in all types of specifications, such as physical dimensions, type, strength, and material.
The machine has now been inspected.
wc_tx003048gb.fm
35
advertisement
Key Features
- Powerful engine for efficient compaction
- Heavy-duty construction for durability
- Compact design for easy maneuverability
- Low vibration levels for operator comfort
- Easy-to-use controls for operator convenience
- Versatile use in various soil conditions
- Proven Wacker Neuson quality and reliability
Related manuals
Frequently Answers and Questions
What is the recommended fuel for the BS50-2?
What type of oil should be used in the BS50-2?
How often should the air filter be cleaned?
What is the maximum compaction depth of the BS50-2?
What is the operating weight of the BS50-2?
advertisement