Wiper blades
Wiper blades
To have a clear view of things,
wiper blades that are in perfect shape are absolutely indispensable,
clean the wiper blades regularly with a cleaner and
remove any tough dirt stains with a sponge or brush.
>Note!
Original wiper blades for your car are available from a qualified specialist workshop, e.g. a smart center.
Changing the wiper blades
Danger of injury!
Before changing the wiper blades, remove the key from the ignition switch. The windscreen wipers could otherwise be set in motion and injure you.
쮿
쮿
쮿
쮿
쮿
쮿
Take the keys out of the ignition switch.
Fold the wiper blade arm up and turn the wiper blade until it is horizontal.
Press the retaining spring (A).
Slide the wiper blade toward the wiper arm (B).
Remove the used wiper blade.
Slide the new wiper blade onto the wiper blade arm (C).
> The retaining spring must audibly engage in the wiper arm.
Routines 915
Adjusting the wiper nozzles
Adjusting the wiper nozzles
The wiper nozzles are positioned below the windscreen (D and E).
쮿
Use a needle to adjust the spraying range of the wiper nozzles.
>Note!
The wiper nozzles are correctly adjusted if the jet of water strikes approximately the centre of the windscreen.
916 Routines