Installing the Wrist Mount. Zebra WT6000

1 - 6 WT6000 User Guide

Installing the Wrist Mount

The wrist mount provides the mounting of the WT6000 on the forearm for hands-free applications. Refer to the

Wrist Mount Installation Guide for information on the wrist mount.

Mounting Bracket

Release Lever

Strap Tighten Dial

Figure 1-6 Wrist Mount

To install the wrist mount:

1.

Slide the wrist mount onto arm.

2.

3.

4.

Position the Install the short strap on the forearm.

Turn the dial clockwise to tighten. If too tight, turn counterclockwise to loose slightly.

Align the cleat on the back of the WT6000 with the mounting bracket on the wrist mount.

Figure 1-7 Aligning the Cleat

5.

Slide the WT6000 onto the wrist mount until it clicks into place.

Mounting Bracket