Troubleshooting. LG DVX682

DV580.582-E.BESPLLK_6955_ENG 12/10/10 4:52 PM Page 15

Troubleshooting

Symptom

No power.

Cause

The power cord is disconnected.

Correction

Plug the power cord into the wall outlet securely.

The power is on, but the unit does not work.

No picture.

No disc is inserted.

Insert a disc.

No sound.

The TV is not set to receive the signal from the unit.

Select the appropriate video input mode on the TV.

The video cable is not connected securely.

Connect the video cable securely.

The equipment connected with the audio cable is not set to receive the signal from the unit.

Select the correct input mode of the audio amplifier.

The AUDIO options are set to the wrong position.

Set the AUDIO settings to the correct position.

The unit does not start playback.

An unplayable disc is inserted.

The rating level is set.

The remote control does not work properly.

Insert a playable disc. (Check the disc type and regional code.)

Change the rating level.

The remote control is not pointed at the remote sensor on the unit.

Point the remote control at the remote sensor of the unit.

The remote control is too far from the unit.

Operate the remote control closer to the unit.

Specifications

General

Power requirements

Power consumption

Dimensions (Approx.)

Net Weight (Approx.)

Operating temperature

Operating humidity

Laser

Signal system

Outputs

Video Output

Component Video Output

Audio Output

Digital Output (Coaxial)

AC 200 - 240 V, 50 / 60 Hz

8 W

(430 x 35 x 200) mm

(W x H x D) without foot

1.5 kg

5 °C to 35 °C

5 % to 90 %

Semiconductor laser

PAL/NTSC

Inputs (DVX682 only)

USB IN

Bus power supply

4 pin (USB 2.0 / 1.1 standard)

DC 5 V 200 mA

1.0 V (p-p), 75 Ω , sync negative,

RCA jack x 1 / SCART (TO TV)

(Y) 1.0 V (p-p), 75 Ω , sync negative, RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω ,

RCA jack x 2

2.0 Vrms (1 kHz, 0 dB), 600 Ω ,

RCA jack (L, R) x 1 / SCART (TO TV)

0.5 V (p-p), 75 Ω , RCA jack x 1

Accessories

Video/Audio cable, Remote Control, Battery

Designs and specifications are subject to change without prior notice.

15