Connecting to a PC
y Image shown may differ from your TV.
Your TV supports the feature and has the built-in speakers with Virtual Surround that reproduces sound clearly with a rich bass.
: The function when a PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.
NOTE y If you want to use HDMI-PC mode, you must set the [Input Label] to [PC] mode.
y The OSD (On Screen Display) is displayed on the screen as shown below.
» When turning the product on in HDMI input.
» When switching to HDMI input.
Is the input connected to your PC?
Remote control
The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
CAUTION y Do not mix old and new batteries, as this may damage the remote control.
y The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor on the TV.
Do not show message again YES NO y If you select [YES] the size and image quality are optimized for your PC.
y If you select [NO] the size and image quality are optimized for the
AV device (DVD player, set-top box).
y If you select [Do not show message again] this message does not appear until the TV is reset. You can change the set value in
(Home) [Inputs] [Input Label].
9
10
(Some buttons and services may not be provided depending on models or regions.)
1 To use the button, press and hold for more than 3 seconds.
(Power) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Selects TV or PC mode.
Recalls your preferred subtitle in digital mode.
(Settings) Accesses the settings menu.
(Inputs) Changes the input source.
Number buttons Enters numbers.
1 Edits QUICK ACCESS. (Depending on model)
QUICK ACCESS is a feature that allows you to enter a specified app or
Live TV directly by pressing and holding the number buttons.
Accesses the saved programme list.
(More actions) Displays more remote control functions.
(Depending on model)
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
(Mute) Mutes all sounds.
(Mute) 1 Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
Teletext buttons ( teletext.
) These buttons are used for
(Home) Accesses the home menu.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
Selects menus or options and confirms your input.
Audio descriptions function will be enabled. (Depending on model)
Turns the PIP mode on or off. (Depending on model)
Accesses the Quick menus. (Depending on model)
(Streaming Service button) Connects to the Video
Streaming Service. (Depending on model)
Starts to record and displays record menu. (Only Time Machine Ready supported model) (Depending on model)
(Control buttons) Controls media contents.
, , , These access special functions in some menus.
(Gaming Mode) Turns the gaming mode on or off.
(Backlight) Adjusts the brightness of the screen by controlling the screen backlight.
NOTE y On MHEG programme, you cannot adjust the backlight with the yellow or blue key.