Description of the appliance. Hisense RR220D4AR2 TALL FRIDGE RED, RR220D4AD2 TALL FRIDGE SLV, BLK TALL FRIDGE, RR220D4AD2

Description of the appliance

View of the appliance

1. Freezer chamber

2. Ice tray(in Freezer chamber )

3. Temperature regulator

4. Lamp cover

5. LED light(in the lamp cover)

6. Control knob

7. Storage shelves

8. Wine rack

9. Crisper cover

10. Crisper

11. Door

12. Door racks

13. Adjustable feet

1

2

3

4

5

6

7

8

9

10

11

8

12

13

Note: Due to continual modification of our products, your refrigerator may be slightly different from this instruction Manual, but its functions and usage methods remain the same.

Control panel

Starting up and temperature regulation

Insert the plug of the connection lead into the plug socket with a protective grounding contact. When the refrigerator compartment door is opened, the internal lighting is switched on.

The temperature selector knob is located on the back side of the refrigerator compartment.

Setting “off” means no cooling

Turn the temperature control to “off” position stops the cooling cycle,but does not shut off the power of the refrigerator.

Setting “1” means

Highest temperature, warmest setting.

Setting “7” (end-stop) means

Lowest temperature, coldest setting.

Important! Normally, we advise you select a setting of 2, 3 or 4; if you want the temperature higher or lower, please turn the knob to a warmer or colder setting accordingly. When you turn the knob to a colder setting, this can lead to the more energy efficiency. Otherwise, it would result the consumption of energy.

Important!

High ambient temperatures (e.g. on hot summer days) and a cold setting

(position 6 to 7) may cause the compressor to run continuously or even non-stop!

Reason: When the ambient temperature is high, the compressor must run continuously to maintain the low temperature in the appliance.

Warning!

Don’t try to repair the appliance

and change the LED light yourself.

If the LED light can’t work, please contact your specialist dealer or your local

Customer Service Center to change it.