advertisement
▼
Scroll to page 2
of 253
5
Point the camera at the chart by turning the focus ring and focus on it.
6
Set the zoom ring to wide angle.
7
Turn the Ff ring until the chart is in focus, being careful not to disturb the focus ring.
8
Repeat steps 4 to 7 until the chart stays in focus all the way from wide angle to telephoto.
9
Tighten the Ff ring fixing screws.
5
Chapter 5 Setting Up the Camcorder
5-13
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
Download PDF
advertisement
Table of contents
- 64 Features
- 64 1-1-1 Camera Features
- 64 1-1-2 VTR Features
- 64 Example of System Configuration
- 64 Precautions
- 65 Power Supply
- 65 Accessory Attachments
- 65 Audio Functions
- 65 Shooting and Recording/Playback Functions
- 65 Setup Menu Operating Section
- 65 Time Code System
- 65 Warnings and Indications
- 65 Warnings and Indications on the Display Panel
- 65 Indicators on the Viewfinder
- 66 About Cassettes
- 66 3-1-1 Loading and Unloading a Cassette
- 66 3-1-2 Preventing Accidental Erasure
- 66 Recording
- 66 3-2-1 Basic Procedure
- 66 3-2-2 Continuous Recording
- 66 Checking the Recording — Playback
- 66 Recording Review
- 93 Playback in Color
- 93 Tele-File
- 94 Adjusting the Black Balance and the White Balance
- 94 4-1-1 Adjusting the Black Balance
- 94 4-1-2 Adjusting the White Balance
- 94 Setting the Electronic Shutter
- 94 4-2-1 Shutter Modes
- 94 4-2-2 Selecting the Shutter Mode and Speed
- 94 Adjusting the Audio Level
- 94 Setting the Time Data
- 94 4-4-1 Setting the User Bits
- 94 4-4-2 Setting the Time Code
- 94 4-4-3 Entering the Real Time in the VITC
- 94 4-4-4 Synchronizing the Time Code
- 94 Setup Menu Display on the Viewfinder Screen
- 94 4-5-1 Basic Use of the Setup Menu
- 94 Status Display on the Viewfinder Screen
- 94 Setup Using the OPERATION Menu
- 94 4-7-1 Selecting the Display Items
- 94 4-7-2 Selecting the Items for Which the '!' IND is to Light
- 94 4-7-3 Setting the Marker Display
- 94 4-7-4 Setting the GAIN Selector Values
- 94 4-7-5 Setting the Viewfinder
- 94 4-7-6 Setting the Automatic Iris
- 94 4-7-7 Setting the Battery
- 94 4-7-8 Setting the D5600K Mode and Assignable Switches
- 188 4-7-10 Selecting the Lens File
- 188 Paint Menu
- 188 Maintenance Menu
- 188 4-10 Using the Memory Stick
- 188 4-10-1 Handling the Memory Stick
- 188 4-10-2 Using Data on the Memory Stick
- 189 Power Supply
- 189 5-1-1 Using a BP-L60A Battery Pack
- 189 5-1-2 Avoiding Breaks in Operation Due to Dead Batteries
- 189 5-1-3 Using an AC Adaptor
- 189 5-1-4 Using the Anton Bauer Ultralight System
- 189 Adjusting the Viewfinder
- 189 5-2-1 Adjusting the Viewfinder Position
- 189 5-2-2 Detaching the Viewfinder
- 189 Mounting the Lens
- 189 Adjusting the Flange Focal Length
- 189 Audio Input System
- 189 5-5-1 Using the Supplied Microphone
- 189 5-5-2 Using an External Microphone
- 189 Microphone System)
- 189 5-5-4 Connecting Line Input Audio Equipment
- 189 Tripod Mounting
- 189 Attaching the Shoulder Strap
- 189 Adjusting the Shoulder Pad Position
- 189 Putting On the Rain Cover
- 189 5-10 Connecting the Remote Control Unit
- 211 Testing the Camcorder Before Shooting
- 211 6-1-1 Preparations for Testing
- 211 6-1-2 Testing the Camera
- 211 6-1-3 Testing the VTR
- 211 Maintenance
- 211 6-2-1 Cleaning the Video Heads
- 211 6-2-2 Cleaning the Viewfinder
- 211 Operation Warnings
- 246 F-stop indicator
- 246 CC filter
- 246 filter indicator
- 246 ND filter
- 246 selecting
- 246 switch
- 246 Iris setting indicator
- 246 gain indicator