Preferences Dialog Box (Main Screen). Canon imagePROGRAF iPF685, imagePROGRAF iPF825 MFP M40, imagePROGRAF iPF830 MFP M40, IMAGEPROGRAF IPF840, imagePROGRAF iPF815 MFP, imagePROGRAF iPF825 MFP, imagePROGRAF iPF770, imagePROGRAF iPF755, imagePROGRAF PRO-2000, imagePROGRAF iPF780

Preferences Dialog Box (Main Screen)

You can set automatic launch of the Canon IJ Status Monitor, using the driver's internal spool processing function, and inserting blank pages.

Click Preferences on the main screen to display.

When using an Océ printer, the Preferences button on the main screen does not function.

Start Status Monitor automatically check box

If you start Direct Print & Share when the check mark is added, the Canon IJ Status Monitor of the configured printer will automatically start. If you switch printers, the Canon IJ Status Monitor will also switch automatically.

Important

• You may not be able to select this depending on the Canon printer you are using.

Note

• If you quit Direct Print & Share, the automatically launched the Canon IJ Status Monitor will also end.

Use Spooling at Printer Driver check box

Add a check mark if you want to use all printer driver functions, such as Print from Last Page and 2

Pages/Sheet .

Important

• If the Use Spooling at Printer Driver check mark is added, intermediate files are temporarily generated before printing when printing large files. Depending on how much space you have on your hard disk, this may cause an error.

• You may not be able to select this depending on the printer you are using.

Insert blank page between files check box

If you want to make it easier to see the separation points between files when printing multiple files, add a check mark. A blank page will be inserted between files.

Note

• This function will not work if you are using HP-GL/2 files or cut paper, or if you have enabled Set

PIN for printing or Save in Job Box on the printer driver.

83