- Computers & electronics
- Computer components
- System components
- Motherboards
- Asus
- Barebone V3-P5G33
- Installation manual
advertisement
3.1 Installing an operating system
The barebone system supports Windows
®
2000/XP operating systems
(OS). Always install the latest OS version and corresponding updates so you can maximize the features of your hardware.
Because motherboard settings and hardware options vary, use the setup procedures presented in this chapter for general reference only. Refer to your OS documentation for more information.
• Windows XP OS setup cannot recognize Serial ATA hard drives without the necessary drivers. Use the bundled floppy disk when installing Windows XP OS to a Serial ATA hard drive.
• From the Windows XP setup screen, press F6 when prompted then follow succeeding screen instructions to install the SATA drivers.
3.2 Powering up
Press the system power button ( ) to enter the OS.
3-2
Press to turn ON the system
3.3 Support CD information
The support CD that came with the system contains useful software and several utility drivers that enhance the system features.
• Screen display and driver options may not be the same for different operating system versions.
• The contents of the support CD are subject to change at any time without notice. Visit the ASUS website for updates.
Chapter 3: Starting up
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Intel LGA 775 (Socket T)
- micro ATX Realtek ALC883
- 4 Non-ECC Maximum internal memory: 8 GB
- GMA 3100 256
- 64 Mbit
Related manuals
advertisement
Table of contents
- 33 1.1 Welcome!
- 33 1.2 Front panel (external)
- 33 1.3 Rear panel
- 33 1.4 Internal components
- 34 2.1 Preparation
- 34 2.2 Before you proceed
- 34 2.3 Removing the side cover and front panel assembly
- 34 2.4 Central Processing Unit (CPU)
- 34 2.4.1 Overview
- 34 2.4.2 Installing the CPU
- 34 2.4.3 Installing the CPU fan and heatsink assembly
- 34 2.5 Installing a DIMM
- 34 2.5.2 Installing a DDR2 DIMM
- 34 2.5.3 Removing a DDR2 DIMM
- 34 2.6 Expansion slots
- 34 2.6.1 Installing an expansion card
- 34 2.6.3 PCI slots
- 34 2.6.4 PCI Express x4 slot
- 34 2.6.5 PCI Express x16 slot
- 34 2.7 Installing an optical drive
- 34 2.8 Installing a hard disk drive
- 34 2.9 Installing the card reader
- 34 2.11 Re-connecting cables
- 34 2.12 Reinstalling the cover
- 44 3.1 Installing an operating system
- 44 3.2 Powering up
- 44 3.3 Support CD information
- 44 3.3.1 Running the support CD
- 44 3.3.2 Utilities menu
- 44 3.3.3 Manual menu
- 44 3.3.4 ASUS contact information
- 44 3.3.5 Other information
- 44 3.4 Software information
- 45 4.1 Introduction
- 45 4.2 Motherboard layout
- 45 4.3 Jumpers
- 45 4.4 Connectors
- 46 5.1 Managing and updating your BIOS
- 46 5.1.1 ASUS Update utility
- 46 5.1.3 ASUS EZ Flash utility
- 46 5.1.4 AFUDOS Flash utility
- 46 5.1.5 ASUS CrashFree BIOS 3 utility
- 46 5.2 BIOS setup program
- 46 5.2.1 BIOS menu screen
- 46 5.2.2 Menu bar
- 46 5.2.3 Legend bar
- 96 5.2.4 Menu items
- 96 5.2.5 Sub-menu items
- 96 5.2.7 Pop-up window
- 96 5.2.8 General help
- 96 5.3 Main menu
- 96 5.3.1 System Time
- 96 5.3.2 System Date
- 96 5.3.3 Legacy Diskette A
- 96 5.3.4 SATA1-4, PATA primary master/slave
- 96 5.3.6 System info
- 96 5.4 Advanced menu
- 96 5.4.4 Chipset
- 96 5.4.6 PCIPnP
- 96 5.5 Power menu
- 96 5.5.1 Suspend Mode
- 96 5.5.2 Repost Video on S3 Resume
- 96 5.5.3 ACPI Version
- 96 5.5.4 ACPI APIC Support
- 96 5.5.6 Hardware Monitor
- 96 5.6 Boot menu
- 96 5.6.1 Boot Device Priority
- 96 5.6.3 Security
- 96 5.7 Tools menu
- 96 5.8 Exit menu